Seekins Bravo and NV rail

[C. Smith]

Hello all, quick question here.

I have a Seekins Havok with the KRG Bravo stock and it comes with a 20moa base. My problem is I can't find anyone that makes a 20moa system for attaching my PVS-27 or a zero base so I can get the KRG spigot or rail. Does anyone know of a mounting solution that will work for this setup?

Thanks in advance for any help.

 

[djarecke]

I've run my setups that have a continuous rail to a 20MOA to 0 MOA (as you described). With the PVS-27, it doesn't seem to make a difference. The image quality is the same, and there is no discernible offset for POI.

With the MUNS, I'd just roll with what you have.

 

[C. Smith]

I've run my setups that have a continuous rail to a 20MOA to 0 MOA (as you described). With the PVS-27, it doesn't seem to make a difference. The image quality is the same, and there is no discernible offset for POI.

With the MUNS, I'd just roll with what you have.

I haven't tried it to see if there is a POI shift as my other rifles are all same between base and rail. I just remember when going through class, they said the glass and the MUNS must be on the same plane or there would be POI shift. Granted, at close range it wouldn't be as significant but at long range it certainly will if there is a shift. I need to buy either a spigot or rail regardless for this rifle, just hoping there is a solution that will put the glass and MUNS on the same plane for piece of mind. How far have you confirmed on your setup the little to no POI with them being on different planes?

 

[djarecke]

I haven't tried it to see if there is a POI shift as my other rifles are all same between base and rail. I just remember when going through class, they said the glass and the MUNS must be on the same plane or there would be POI shift. Granted, at close range it wouldn't be as significant but at long range it certainly will if there is a shift. I need to buy either a spigot or rail regardless for this rifle, just hoping there is a solution that will put the glass and MUNS on the same plane for piece of mind. How far have you confirmed on your setup the little to no POI with them being on different planes?

Yes sir. My AX and MK12 both have constant rails, but everything else is canted base and flat rail in the front. There's no discernible POI change from one to the other.

I've heard the MUNS is pretty tolerant of that and I would believe it.

 

[C. Smith]

Yes sir. My AX and MK12 both have constant rails, but everything else is canted base and flat rail in the front. There's no discernible POI change from one to the other.

I've heard the MUNS is pretty tolerant of that and I would believe it.

I appreciate the input and that is good to hear. I guess I will just have to get a rail system or spigot and give it a shot.
Does anyone have input on preference of the spigot or rail for these chassis and why? This is my first bolt gun so I have no knowledge or experience of what is better and why.