Here are some pictures of whats coming in 2010 from us and a little about what we have been up to.
Some of the new products have been floating around for a few months. We partnered up with Spikes tactical and built them a kick butt lower and upper. They will also be selling the rails you see as well as a few other trinkets we come up with for the ARs. This works great for us because we are able to do what we do best. Build and develop more kick butt parts for you.
New stuff!!!
223 uppers – Spikes
223 uppers - SP
223 Lower – spikes
223 gen2 lower - SP
Quad rails for AR15’s (2 different designs)
Ambi AICS mag system
Spikes Tactical lower/upper:
First is the new lower we designed and are building for Spikes Tactical.
***sold thru spikes tactical***
We eliminated the use of roll pins, hammers and punches. We replaced them with custom screw-in dowel pins as well as re-engineered and captured the buffer retaining pin. The rear take down pin is located under the grip and retained with a set screw. We added a upper tensioning set screw and a set screw for trigger reset. Top it off with an Ambi bolt stop and this has more features than any other lower.
The upper is also 7075 billet and beefed up in areas to add stiffness. The forward assist is held in by a custom set screw pin just like the lowers and they have the M4 feed ramps cut in. Every aftermarket rail system we could get our hands on works well. We will be making these to blend with the spikes lowers as well as our SP223 lowers.
The spikes upper and lowers are selling for $499/set thru spikes.
The SP upper target price is around $230
Quad Rails.
***sold thru spikes tactical***
Here are some pictures of the first design, the BAR rail (big ass rail). This one is 1.8” inside to accommodate suppressors and for those who like a full size rail. It sounds big, but it is very comfortable to hold onto. The picatinny slots are scalloped and everything is de-burred as I machine it, so there is no need for rail covers. Our rails will not bite!
The rail will come with a special barrel nut and shims for the barrel nut so you can get the proper torque on your barrel. No more fighting to get to the next gas tube hole!
The larger holes you see towards each end are for QD mounts. The picatinny section of the rail mates perfectly with the upper receiver making the rail monolithic. Our uppers will be cut so the picatinny slots are continuous with this rail. Also notice the hood portion that wraps around just underneath the upper receiver’s rail that eliminates rotation.
Weight for 10’’ rail is around 12.5oz (4”, 7”, 9”, 10” and 12” will be available)
Price – TBD but they will be very affordable. Target retail price is aprox 140$ for a 10” rail system.
We have another quad rail we are working on that is slim in design. I will post pics when it’s closer to completion.
SP223 Gen2 lower
Because of the added volume of parts we are building, thanks to spikes we are able to build lowers much more efficiently and would like to pass on the savings to you….the price on our new gen2 lowers…..$269 with all the features listed above.
(pics are of first gen lower)
Rings…
We ARE bringing back the 6 screw rings this year in a few heights!! We will be starting on them after our move.
Also, we working on a one piece solution for AR platforms and some other goodies. I will post about them as they become available.
Some of the new products have been floating around for a few months. We partnered up with Spikes tactical and built them a kick butt lower and upper. They will also be selling the rails you see as well as a few other trinkets we come up with for the ARs. This works great for us because we are able to do what we do best. Build and develop more kick butt parts for you.
New stuff!!!
223 uppers – Spikes
223 uppers - SP
223 Lower – spikes
223 gen2 lower - SP
Quad rails for AR15’s (2 different designs)
Ambi AICS mag system
Spikes Tactical lower/upper:
First is the new lower we designed and are building for Spikes Tactical.
***sold thru spikes tactical***
We eliminated the use of roll pins, hammers and punches. We replaced them with custom screw-in dowel pins as well as re-engineered and captured the buffer retaining pin. The rear take down pin is located under the grip and retained with a set screw. We added a upper tensioning set screw and a set screw for trigger reset. Top it off with an Ambi bolt stop and this has more features than any other lower.
The upper is also 7075 billet and beefed up in areas to add stiffness. The forward assist is held in by a custom set screw pin just like the lowers and they have the M4 feed ramps cut in. Every aftermarket rail system we could get our hands on works well. We will be making these to blend with the spikes lowers as well as our SP223 lowers.
The spikes upper and lowers are selling for $499/set thru spikes.
The SP upper target price is around $230
Quad Rails.
***sold thru spikes tactical***
Here are some pictures of the first design, the BAR rail (big ass rail). This one is 1.8” inside to accommodate suppressors and for those who like a full size rail. It sounds big, but it is very comfortable to hold onto. The picatinny slots are scalloped and everything is de-burred as I machine it, so there is no need for rail covers. Our rails will not bite!
The rail will come with a special barrel nut and shims for the barrel nut so you can get the proper torque on your barrel. No more fighting to get to the next gas tube hole!
The larger holes you see towards each end are for QD mounts. The picatinny section of the rail mates perfectly with the upper receiver making the rail monolithic. Our uppers will be cut so the picatinny slots are continuous with this rail. Also notice the hood portion that wraps around just underneath the upper receiver’s rail that eliminates rotation.
Weight for 10’’ rail is around 12.5oz (4”, 7”, 9”, 10” and 12” will be available)
Price – TBD but they will be very affordable. Target retail price is aprox 140$ for a 10” rail system.
We have another quad rail we are working on that is slim in design. I will post pics when it’s closer to completion.
SP223 Gen2 lower
Because of the added volume of parts we are building, thanks to spikes we are able to build lowers much more efficiently and would like to pass on the savings to you….the price on our new gen2 lowers…..$269 with all the features listed above.
(pics are of first gen lower)
Rings…
We ARE bringing back the 6 screw rings this year in a few heights!! We will be starting on them after our move.
Also, we working on a one piece solution for AR platforms and some other goodies. I will post about them as they become available.
