Just wondering what you think about these SHADOW TECH SYSTEMS any feed back? saw one the other day wondering if there all the hype
-
Having trouble using the site?
Contact support
SHADOW TECH SYSTEM (glock)
- Thread starter scorpio 25
- Start date
Like mine a lot, trigger is nice and shoots great. Like it better than my 19X Glock.
Love mine, great value, and I appreciate that it is a factory turn-key solution that just works out of the box.
They absolutely fit in a G-19 holster. Perfectly. That is, the MR-920 does. I love mine. Flat shooting, great adjustable grip angle, nice trigger, nice grip texture, built it alacart, what's not to like? Noticeably lighter than a G19 also.
You can find them for $700 on Gunbroker. Also, they are on Expert Voice if you're a member.
Shot a couple mags worth of ammo in one a year ago and I don’t see any benefits to speak of. it just didn’t do anything for me. But it does seem like a quality piece and guys love em.
Just build a polymer 80, better frame out the box with all the good mods by default and a proper grip angle, and much more freedom by design.
Really? Why?
Having a p80 and a g19 which was a gift, my p80 shoots waaaay better at least for someone who shoots 1911/2011s
Could you expand? I shot a rental at the range the other day and was happy with the G19 equivalent with a Holosun mounted on it.
Just wondering if you compare the STS against the gen 5 G19 mos what would you say ?
This is why I posted above that I didn't think it fit a Glock 19 holster. Tier 1 shows a different option for the Shadows because the trigger guards are different but they may work in Glock 19 holster if you run a light.
Last edited:
I have the mr920 combat and have been running it for 6 months or so. At this point I think it’s the best “glock” ever made. All the shit you would want to do to glock to make it better is in there. Especially grip angle
There's no recoil bosses what so ever for any optics. It's just a bigassed oversized cut and a little polymer spacer goes in the rear and thats it. They are tight on the rear but a gap in the front so you have the screws holding it down, the spacer holding it from moving rearward at all, but putting forward pressure on those screws that should only ever be holding the optic down to the slide. Then you have a gap in the front along with that forward pressure.
When setting up bolt guns there's a big reason why we push the mount forward and have the front of the recoil lug against the rail... RECOIL.
I just don't see how it can be an effective solution. There's recoil bosses on these optics for a reason, they need to be there to hold the optic under recoil, a spacer at only the rear isn't going to do it.
They did it to make the slide work with as many optics as possible without plates because that's all people seem to give a shit about, no concern if the optic will actually stay on the damn gun under recoil or not.
I've also read a lot of reports on these things breaking firing pins. That seems to be a thing with them.
I think you read their website too quickly. The actual quote regarding the rifling is "The match-grade barrel is conventionally rifled and spiral-fluted to improve evacuation of debris."
Conventionally. Not conveniently
thanks for the infoWell my go to is a gen 4 G19 with idot pro iron sights. I prefer the finger grooves.
For some reason Scott jedlinski is not a fan of the MOS mounting system.
As for the STS, I don’t think there is anything someone could really complain about. Accurate, reliable, good looking pistol. They make a lot of little or big changes that people ask for that Glock doesn’t offer in factory form.
The spacer goes in FRONT thereby removing ALL slop. If all else fails, read the directions, or since you don't have one anyway you can probably access a manual online. OPTIC CAN'T MOVE.
No, they're back on there. As of a week or two now. At least they are to me; maybe we have different affiliation levels. I work in the industry.
Last edited:
I like mine. I considered buying a Glock and then putting all the Gucci parts on it but this route ends up at the same place for a lower cost and without the wait times for machine work.
You don’t have a fucking clue what you’re talking about. Here’s a vid from Shadow Systems explaining the mounting system and showing that the spacers go in the rear.
Furthermore I had several in my hands on Saturday that all had optics on them in the store and they ALL had spacers in the back.
You don’t have a fucking clue what you’re talking about. Here’s a vid from Shadow Systems explaining the mounting system and showing that the spacers go in the rear.
Furthermore I had several in my hands on Saturday that all had optics on them in the store and they ALL had spacers in the back.
OK, I dug my manual out, and there is a table in it showing which spacers to use with which optics and whether they go in front or rear of the optic. As seen in the picture in my previous comment, I put a Viper on mine and the spacer goes in front per the table, but I see several of them do go in the rear of other optics. So, you have a point, however regardless of front or rear the spacers take up ALL the space in the cut-out so I still don't see the problem. Several of us at my shop run MR-920's and none that I know of have had any problems with the optics mounting system. So at least I didn't make it up, even though I don't have a fucking clue what I'm talking about. So sorry.
Last edited:
Bought a DR920. really nice gun, if you buy a Glock have the slide milled, stippled etc you’re looking over what the Shadow Systems would cost. My only complaint is I wish the stippling on the grip was more aggressive.
Ahh. Just must not be available to LE/.mil. Didn’t realize different brands had different access levels.
EV app is funny sometimes, too. I would be surprised if they are not available to you; maybe you just need to do another lesson or something. My affiliation is MIL and retail LGS.
Dude I literally looked at 4 of the things in my local shop on Saturday that had Holosuns and RMR’s mounted and every single one of them had a gap in the front. Like .020” or so which is significant. No, they do not fit tight.
It’s a shitty mounting system. Period.
Similar threads
