Shorty 308, To Thread Or Not To Thread

[Pappakap]

I was able to pickup up a nice custom .308 on a 700 action in what I believe is McMillan stock. Since my original intent was to create a Gladius (ish) build I’m thinking about having the barrel threaded and doing either the classic SF brake or maybe something Simpler like a Little Bastard. Am I gaining that much by spending the time and money to get it threaded? I don’t plan on getting a can anytime soon and I typically shoot on a line but I really like the idea of the reduced recoil for increased control.

Thanks in advance for the input

 

[kRcu]

I always run a brake on short .308’s.

 

[wade2big]

If you want a brake then thread it. If not then don’t. I don’t understand your question really.

I do not like brakes. Even doubling up on ear plugs, some are so obnoxious that it is still uncomfortable to shoot. If you shoot under a roof then it will be worse yet. For competition use, I can see the benefit.

 

[Pappakap]

I was just looking for some advice that might tip the scales on if it’s worth the shipping and expense associated. I don’t have access to a braked gun to try it or it or I would. Most of my shooting is on a line with some under cover out to 500 yards max recreationally.

 

[Upstate43]

I always run a brake on short .308’s.

I have a 24" barrel (.308 SPR) and adding a brake was a huge help in mitigating the recoil and allowing for faster follow-up shots. I'd say if the OP has any intention of ever using that rifle for long range course work or competitions, adding a brake is a no-brainer.

As for the increased noise, I haven't found that to be an issue, inside or outside. I have always doubled up on ear plugs, even with the brake on my rifle.

 

[MElank]

Yes, thread it. A brake will greatly help mitigate the recoil of a short .308. Also, resale value.

 

[wade2big]

I was just looking for some advice that might tip the scales on if it’s worth the shipping and expense associated. I don’t have access to a braked gun to try it or it or I would. Most of my shooting is on a line with some under cover out to 500 yards max recreationally.

A local gunsmith can thread the muzzle easily. I would bet you have some reasonably close by where you wouldn’t have to ship. I could be wrong.
it only costs $17 to ship a rifle using usps priority mail as long as you keep the package as small as possible.

 

[stalwart300]

My 16" 308s are threaded usually run a can but have used a break. But I thread all my barrels.

 

[cattleman99]

Get an APA Chode and keep it short

 

[Pappakap]

Interesting thought on the matter. I didn’t think it would make that big of a difference on OAL compared to the LB

 

[Scotch_egg]

It’s worth it.

 

[CaptNemo]

If you’re asking for moral support, consider yourself supported and get it threaded

 

[Tnc]

Thread it

 

[Pappakap]

Thanks for the support. I made the decision to get it sent off to G.A. Precision. It’ll get threaded and a Little Bastard coated to match.

 

[CaptNemo]

Nice to see how well a little “Peer Pressure” works among this group !!