-
Having trouble using the site?
Contact support
Show off your Manners PRS-TCS Stocks
- Thread starter Tony1320
- Start date
I highly recommend piecing one together, you can get a custom action that is higher quality than springfield and bergara. A custom action can accept prefits too.
The manners prs-tcs is designed for prs competition. Guys shooting prs usually shoot heavy rifles with heavy barrels. No one really shoots prs matches with carbon fiber barrels they’re to light. This stock allows you to put a heavy barrel in is and balance out the rifle to where you want.
If you like this stock and want a light rifle with and carbon barrel look at the manners lrh.
Saltwater Camo TCS with a Tempest action in 6cm.
Anyone have issues with the arca rail bending with very little pressure on it?
Not happy after just 1 range trip.
Not happy after just 1 range trip.
I saw that, you beat me to it by minutes! I had it in the cart and got up to do something around the house and it was gone when I sat back down again!
If you want to trade for GAP Metallic in High Gloss get at me (kidding, not kidding)...
I have been eyeing them for quite some time. Had a few back in black and Americana pass me up as I was waiting for GAP. Then after seeing one of these, I knew I had to grab it. It seems like all of their recent releases are back in black or Americana.I saw that, you beat me to it by minutes! I had it in the cart and got up to do something around the house and it was gone when I sat back down again!
If you want to trade for GAP Metallic in High Gloss get at me...
Almost snagged a back in black color PRS1 a couple weeks ago. Couldn’t find any examples on line. Was ginna paint it myself anyway.
One I saw available was just too heavy with the adjustable cheek riser. Decided to install a riser myself on an EH1 to keep the weight down. I have several “heavy” bolt guns. Going titanium action, carbon fiber barrel and custom outfitted stock shooting for about 6.5-7.0 lbs before optics. We will see….
the “back in black” color would have beeb fine as is or made a great base for some custom stencil/graphics. Nice looking rig!
One I saw available was just too heavy with the adjustable cheek riser. Decided to install a riser myself on an EH1 to keep the weight down. I have several “heavy” bolt guns. Going titanium action, carbon fiber barrel and custom outfitted stock shooting for about 6.5-7.0 lbs before optics. We will see….
the “back in black” color would have beeb fine as is or made a great base for some custom stencil/graphics. Nice looking rig!
Attachments
Got a few on order. Hopefully will have them in a couple weeks and can let ya know.
Mine wouldn't seat. I decided to grind down the mag catch and it works flawlessly.
Running AW mags with HRD Kit currently in new Fuzion BRA build and they have been running great although only have a couple hundred rounds through it.
Good eye, I was testing it for John. I can get you in touch with him if you’re looking for one. Not sure if he’s running full production on them yet or if he plans to, but it’s a worthwhile add to the Omega for sure.
Will have my TCS next week. 28" hvy comp hawkhill 6bra, LPA Fuzion, mk5hd pr2-mil. With tuner/brake/Ckyepod I figure I'll be around 21.5# how much weight can I add with the steel arca rail?
Anyone running their tcs with a br variant utilizing aw mags with hrd kit? I've got accurate mags with kits but would like to try the shorter height mags.
I couldn’t get AW to seat. I decided to file the mag itself. It works but can be ripped out without pushing the mag release lol
To use shorter mags I am switching to MDT BR 10 round and ARC 10 round.
Report back to us on how the arc mags run with pva mag kits. I run arc mags exclusively in gt, x47 and creed with crf and push feed actions with no issues thus far. However the feed lips are short as they're designed or crf actions for early release into the retained bolt face. Curious how a br variant case will operate with the further shortened lips when a mag kit is installed.
Also, Manners got back to me this morning, they are no longer offering metal arca rails for the TCS. Kinda BS, I bet the demand was higher than the a419 unit.
I’m running a Fuzion with aw mag with HRD kit and they are running great thus far.
You can use the steel Torchworks rail GAP has for their PPR rifle, IIRC you’ll need to drill a hole or 2 maybe, you’ll need to call GAP and ask about them though, because I can’t seem to find them on their site anymore…
I dislike the aluminum/brass A419 rail and much prefer the steel rail, (GAP was going to help me with the Torchworks one on my latest TCS after it showed up with an A419 rail, but Tom found one of the steel ones kicking around the shop for me, I may have gotten one of the last ones).
IDK why they’re dropping the steel ARCA rails either, bummer.
I'm just not a fan the serrated chainsaw edges. I much prefer smooth. The rrs soar clamp on my Ckyepod is 3 years old and its worn enough, a just slightly under spec rail can slip a lil. Maybe I need to upgrade some gear.......
Could anyone measure from the front of the grip to the trigger shoe, and let me know the distance? Preferably with a curved TriggerTech.
I've had several manners stocks. Some fit perfect and others had quite a stretch from the grip to the trigger.
Thanks in advance!
I've had several manners stocks. Some fit perfect and others had quite a stretch from the grip to the trigger.
Thanks in advance!
Measuring from center of the grip area to the middle of the shoe is roughly 2 3/8”. Basically an angled measurement. But from top of grip area straight to shoe is 2”.
