Single Feed AICS Mag?

[65shootmoor]

Are these even a thing for AICS mags? I know it's more of a NRA HiPower piece of gear. I'm single feeding a particular load and wanted to cover my bases. Figured it would be an easy 3D print job.

 

[emastrich]

CDI makes this to accomplish single round feeding.

SSLB, Single Shot Loading Block for Short action 223/308 size rifles. Also available for 300 WM and CIP Setups.
Use this in place of a Magazine, and single feed rounds without headache, works great for
testing long loads or just plinking at the range.

 

[65shootmoor]

CDI makes this to accomplish single round feeding.

SSLB, Single Shot Loading Block for Short action 223/308 size rifles. Also available for 300 WM and CIP Setups.
Use this in place of a Magazine, and single feed rounds without headache, works great for
testing long loads or just plinking at the range.

Thanks a whole bunch, I'll check it out.

 

[spife7980]

AICS SA Single Shot Sled

Easily use your rifle as a single shot with this AICS SA Single Shot Sled. Simply locks in place like a standard magazine.

mkmachining.com

 

[smoothy8500]

Do AICS mags in a Badger DBM normally need a Single-shot Sled? When shooting F-class my Rem 700 feeds fine with a single round laying on top of the AICS mag/ follower. I guess if I wasn't careful the round could go sideways or roll out.

 

[spife7980]

Do AICS mags in a Badger DBM normally need a Single-shot Sled? When shooting F-class my Rem 700 feeds fine with a single round laying on top of the AICS mag/ follower. I guess if I wasn't careful the round could go sideways or roll out.

Yeah, if just laying one top of the feed lips its pointed downwards with the cases body taper and crashes into the breech face. It’s not hard to start the tip into the chamber first though after a few tries, doesn’t take long to learn it.

On the mag

Fed forward

That’s a bravo pictured but my old krg, manners, mdt all feed the same way.

 

[Diver160651]

Yeah, if just laying one top of the feed lips its pointed downwards with the cases body taper and crashes into the breech face. It’s not hard to start the tip into the chamber first though after a few tries, doesn’t take long to learn it.

My Deviants and 700 feed very smooth single feed just by tossing them in... But try that with a Ruger and a few others and they can get hung up unless doing the above.

 

[65shootmoor]

That's how mine does, crashes into breach face. I gnarled up the first Hornady A-Tip I shot doing that.

 

[leftyk82]

Bob sled has an AICS version

 

[65shootmoor]

Bob sled has an AICS version

Is Bob Sled the brand?

 

[Diver160651]

That's how mine does, crashes into breach face. I gnarled up the first Hornady A-Tip I shot doing that.

What are you shooting

 

[65shootmoor]

What are you shooting

6.5 creedmoor in MPA/Curtis Axiom rifle. I've got a post in the reloading section about the whole thing, but the new A-Tips are rather long and pointy. In order for them to fit my mag length (MDT binder mags, 2.890" max), it creates a huge jump to the lands (0.074" jump with comfortable feeding room in mag). My rifle likes them seated closer. I know I can get a mag from MDT without the binder, but the sled is cheaper. I'm not shooting these under a certain distance anyway.

 

[65shootmoor]

Bob sled has an AICS version

Nevermind, I found it. I'll give him props for a fast response, but dern they are expensive. $53 on Midway (where they directed me). I can buy the longer MDT mag for that.

 

[MDT_OFFICIAL]

Hello All,

Some cool new products we came out with in the last couple of weeks for your AICS Mags!

>>> MAG LOADER >>>

>>> MAG EXTENDER >>>

 

[Allthewatts]

If anyone wants of these, I can print them rather easily from PLA and ABS, even nylon. Just hit me up.

 

[bmash]

old thread I know, but same subject...
Anybody been successful with these in a 204 Ruger? Using a tenacity action.