Snipershide sets build thread- LETS SEE EM!

#51
Re: Snipershide sets build thread- LETS SEE EM!

Here's mine still workin on loads for it but Very Happy so far!
Thanks Again Joe for doing this.
000_0857.jpg

000_0856.jpg

I'm gonna upgrade to a PRS as soon as funds allow.
 
#52
Re: Snipershide sets build thread- LETS SEE EM!

10.3" DD govt profile 1/7 Bbl
Troy TRX rail
Noveske KX3 and "SCF" dust cover
DD LPK
BCM mil spec buffer assbly, BCG, and gunfighter CH
hogue grip
magpul MOE, MBUS, BAD lever, and pmags w/ ranger plates
Vortex SPARC
MI sling plate
2ykjtci.jpg
 
#53
Re: Snipershide sets build thread- LETS SEE EM!

Sorry for no pictures, but I just didn't get around to breaking out the camera last trip home. Priorities start with family...

The AR-15 set was perfect, including the MK12 Mod 1 upper from Monty at Centurion. Shot groups holding sub MOA out to 200yds. It has a SS 3-9x on top for now, and I'm looking at other options for later with USO being the front runner.

The two AR-10 sets look great but won't be built until the summer. One will be a .308 and the other in a 6.5CM or .260. They have a date with GAP more than likely...
 
#54
Re: Snipershide sets build thread- LETS SEE EM!

nice good to hear all the good reviews. seriously if anyone has any issues please let me know so we can take care of them.
 
#56
Re: Snipershide sets build thread- LETS SEE EM!

Finally got mine built. Hope to get out this weekend to get a few shots through it.

WOA 18" barrel
Viking / Troy 13" rail
Magpul UBR, MBUS, and mags
Spike's Tactical parts inside

SHAR153.jpg

SHAR15.jpg

SHAR152.jpg

SHAR154.jpg
 
#57
Re: Snipershide sets build thread- LETS SEE EM!

Mine...barrel, rail and Ops Inc brake done by Alan Brown via Kevin at High Caliber Sales. The rest assembled by me using top quality parts (NF 2.5-10x32 scope, LaRue SPR mount, Troy buis, Atlas bipod, Magpul UBR, Colt LPK, Ergo grip, etc.). Ops Inc suppressor on order.

mk1201.jpg


mk1202.jpg
 
#59
Re: Snipershide sets build thread- LETS SEE EM!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TacBlade</div><div class="ubbcode-body">Here is my recent build I just got done with.</div></div>Umm, I don't think that's a Sniper's Hide receiver set. Nice gun, but this thread is for the group buy receiver sets.
 
#60
Re: Snipershide sets build thread- LETS SEE EM!


I'm loving this build! I've got a MK12 MOD1 upper like yours, I've been looking at doing the same stock, the PRS is a bit too heavy. I'm thinking that the Atlas is another switch out I'll need to do to drop some weight.
My only decision is what optics..
Would love to see the range report.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dogman</div><div class="ubbcode-body">Mine...barrel, rail and Ops Inc brake done by Alan Brown via Kevin at High Caliber Sales. The rest assembled by me using top quality parts (NF 2.5-10x32 scope, LaRue SPR mount, Troy buis, Atlas bipod, Magpul UBR, Colt LPK, Ergo grip, etc.). Ops Inc suppressor on order.

mk1201.jpg


mk1202.jpg

</div></div>
I
 
#61
Re: Snipershide sets build thread- LETS SEE EM!

Tracey from GAP just called me to let me know my Rifle was Ready!!!!

Holy crap, I'd be a lying son-of-a-gun if I said I wasn't giddy as a school girl right now.

It's the .308 Hide Upper and lower I sent to them at the beginning of December.

I'll get pics up as soon as she's delivered.
 
#62
Re: Snipershide sets build thread- LETS SEE EM!

When I first started reading the thread, I thought it was "just" an any semi rifle picture thread. The title to the thread is a little confusing.

Some great looking rifles though, may have to get in on the next one, and I really like the trigger guard.

Great job fellas.
 
#63
Re: Snipershide sets build thread- LETS SEE EM!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Boston</div><div class="ubbcode-body">AR15 SN 23

CAJDMT1.jpg

JDMTCABuild2.jpg

JDMTCABuild1.jpg

I'll edit the full build at the end of the week. </div></div>

i dont know how to tell another man this...so i am just going to say it...you just gave me a boner(no homo)

bench
 
#65
Re: Snipershide sets build thread- LETS SEE EM!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Inogame</div><div class="ubbcode-body">
SH556Lt.jpg


SH556Rt.jpg


It's my first ever lower build. I think it turned out, ok. It's my first time driving roll pins, so in true noob fashion I damaged the anodizing around the Bolt Catch Roll Pin, and the Trigger Guard Roll Pin.
Can anyone tell me the best way to cover my learning marks there?


</div></div>What kind of stock is that?
 
#69
Re: Snipershide sets build thread- LETS SEE EM!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: furtaker_.223</div><div class="ubbcode-body">But where do we find one of these lowers? </div></div>

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1942821#Post1942821

The main group by is over, but if you call Eric over at JD he might have a couple more. The number there and a link to their site is on there.
 
#71
Re: Snipershide sets build thread- LETS SEE EM!

from what it sounds like a good number of the 308's took trips to see flounder at GAP. hopefully they start showing up for pics soon
 
#72
Re: Snipershide sets build thread- LETS SEE EM!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BigJoe</div><div class="ubbcode-body">from what it sounds like a good number of the 308's took trips to see flounder at GAP. hopefully they start showing up for pics soon </div></div>

Mine is on a FedEx truck right now, scheduled to be delivered today.
Hopefully have pics up tonight!
 
#73
Re: Snipershide sets build thread- LETS SEE EM!

Got it! I'm not a photographer, sorry for the poor quality.

GA Precision Built .308
JD Machine Stripped Upper/Lower "Sniper's Hide"
20" Bartlein stainless 5R barrel fluted
Daniel Defense 7.62 12" Lite Rail
Magpul PRS Stock
Magpul MIAD Grip
Larue BRM-S Bipod/Mount Combo
Titan Muzzle Break
Geissele SSA-E Trigger

Iphone01022011013.jpg


Iphone01022011011.jpg


Still need to figure out what Iron sights I want, probably Troy Flip-ups.
Waiting on the tax return for my US Optics order...
 
#75
Re: Snipershide sets build thread- LETS SEE EM!

I ordered a complete DD upper from Tommy at Smartgunner. It showed up yesterday. I slapped all my accessories on a snapped a pic. Need to shoot still. Headspace check passed!
grin.gif

DSC_0002-1.jpg
 
#76
Re: Snipershide sets build thread- LETS SEE EM!

I should have my .260 finished when I get back from Phoenix and the 6.5 grendel about 2 weeks after that. I don't know how to post pic's so I may have to seek help.

Mick
 
#77
Re: Snipershide sets build thread- LETS SEE EM!

IMG_1350.jpg

Noveske N4 16" Recon 5.56mm Rifle 11" split rail w/Switchblock
SOPMOD Buttstock
GAS BUSTER PRI Charging handle
Ambi Selector
MIAD Pistol Grip
Troy/Noveske BUIS
magpul ladder rails
Tango down rail covers
Shmitt&Bender short dot LE 1.1-4
American Defense mount/recon
Geissle SSA trigger
SUREFIRE 556K MB
Black Hawk Sling
Young Manufactoring NM Chrome Light bolt
Tango Down Stubby QD Vertical Grip
MGI AR-15/M16/M-4RATE REDUCING BUFFER
MGI D-Ring
Tubb's AR-15 Flat Wire Buffer Spring
ARREDONDO AR-15 MAG WELL
MAGPUL B.A.D. Lever
Magul P-MAG
 
#78
Re: Snipershide sets build thread- LETS SEE EM!

Anybody with the BIGJOE Group buy not use their stripped upper?

I'd be interested in it if you used a complete upper from elsewhere to finish your build.
AR-15 upper.
 
#80
Re: Snipershide sets build thread- LETS SEE EM!

Thanks seta, I troll the sell section fairly regular. Possible I missed it.
I'll look again, I figured I'd post here before the WTB\WTT section. For the folks just keeping the upper in the possibly use later box.
 
#82
Re: Snipershide sets build thread- LETS SEE EM!

no problem at all, i'm glad everyone was happy with what they got. stand by for more stuff once i get home and have a chance to start playing on the machines,
laugh.gif
 
#88
Re: Snipershide sets build thread- LETS SEE EM!

OK all snipershide set buyers i need to find serial number SH-0041. if you own it please message me, there will be a prize for ya.
 
#90
Re: Snipershide sets build thread- LETS SEE EM!

On a fixed income so mine is still awaiting some pts. Ordered a Rock match barrel last week and have pts for lower and upper already. johngfoster that is the style i am going for also.MM
 
#91
Re: Snipershide sets build thread- LETS SEE EM!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BigJoe</div><div class="ubbcode-body">OK all snipershide set buyers i need to find serial number SH-0041. if you own it please message me, there will be a prize for ya. </div></div>

Thanks for the prize Joe! It was unexpected, many thanks to you and Jodi.

Here is what I did with the upper/lower.
M16A4 clone for NRA Highpower, Krieger 1x7, Hollinger float tube with Knight M5 rails, Hollinger pinned carrying handle, RRA trigger 4.5 lbs. Nightforce 2.5-10x24, Larue mnt.

Sorry for the crappy pics.

MVC-025F-2-1.jpg

MVC-030F-3.jpg

MVC-027F-2.jpg

MVC-026F-1.jpg

MVC-031F-1.jpg

MVC-032F-1.jpg
 
#94
Re: Snipershide sets build thread- LETS SEE EM!

Trying this out again. My pics ended up all piled up on each other last time.

I think I may be creating a monster with this build..
I threw in a pic of it next to my MAK-90 for a frame of reference.

DPMS lower
DPMS A3 Upper
24" Stainless Barrel
Free floated, fluted and threaded with a Smith Vortex FH
No fancy grip or stock yet.
1-1.jpg

2.jpg

3.jpg

4.jpg

5.jpg
 
#95
Re: Snipershide sets build thread- LETS SEE EM!

this thread is for JD machine snipershide sets not standard DPMS. I know there are more we sold enough sets, lets see em guys
 
#96
Re: Snipershide sets build thread- LETS SEE EM!

Dude, I'm still gathering the rest of my parts and need to get the barrels ordered. An upcoming move is getting in the way right now though. Two large frames coming soon to a range near you....
 
#97
Re: Snipershide sets build thread- LETS SEE EM!

Krebaum, what kind of scope mount is that on your rifle? I like how it sets the scope forward more than normal mounts, just what I've been looking for.

*Forgive me. I think I just caught it on your post. I read it once and didn't pick up on it until I reread it! Sorry!!
 
#99
Re: Snipershide sets build thread- LETS SEE EM!

So how much do you guys have into your builds? I've got a couple of things going on right now, but the price for the AR15 upper and lowers seems too good to pass up. The sky seems to be the limit, but building my own rifle is appealing. Thanks
 
#100
Re: Snipershide sets build thread- LETS SEE EM!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: djp0623</div><div class="ubbcode-body">So how much do you guys have into your builds? I've got a couple of things going on right now, but the price for the AR15 upper and lowers seems too good to pass up. The sky seems to be the limit, but building my own rifle is appealing. Thanks </div></div>

My rifle:
dsc1086.jpg


My build spec sheet:
mk12mod0screenshot.png


This was an expensive build though.

ETA: The Ops Inc brake and collar actually came with the can, but I put the shipping cost under the brake and collar. Total cost for can/break/collar was $820
 
You must log in or register to reply here.

Similar threads

Stephen Chandler
Building a 'Semi' accurate AR-10 in 6.5 CM
Replies
5
Views
288
Stephen Chandler
Stephen Chandler
Lowlight
The Everyday Sniper Podcast Marco from GDI Talking the PROM L Model and More....
Replies
0
Views
144
Lowlight
Lowlight
4
AR 10 338 RCM ...sure lets build this at home.
Replies
3
Views
583
KYAggie
KYAggie
R
Another HVAC guy question: thermostat programing for heat pump vs. heat strip temp
Replies
9
Views
192
Shoreglide
S
Maggot
Two Alligators
Replies
2
Views
400
Alphatreedog
Alphatreedog
Top Bottom
Back
Home
Forums
Merch
Alerts