First up is a factory SOTIC barrel with Krg barrel nut, barrel nut wrench and muzzle thread protector. It’s got roughly 800 rounds on the barrel and is a 6.5 creedmoor broughton 1:8 with .199 freebore threaded 5/8-24. Was a very consistent 1/2 moa or better with handloads and wasn’t hot rodded, 41.5gr rl-16 pushing 2700 fps. The bad is that when my smith pulled it off my rifle the finish got marred up along with the barrel nut. $SOLD
Second barrel is one I got recently with a barreled action, haven’t taken it off but will soon. It’s an MPA axiom .223 1:7 MTU 22” threaded 5/8-24 with 500 rounds down the barrel. $SOLD
Second barrel is one I got recently with a barreled action, haven’t taken it off but will soon. It’s an MPA axiom .223 1:7 MTU 22” threaded 5/8-24 with 500 rounds down the barrel. $SOLD
Attachments
-
02287AAF-E35D-4DAD-B0DF-C0EDCDF2D8D5.jpeg347.5 KB · Views: 58
-
B312DAA4-DD47-42D0-955F-D4BFE17665BD.jpeg1,007.8 KB · Views: 44
-
048475DF-72D6-400B-8530-604FD869515E.jpeg964.6 KB · Views: 39
-
EFEB6583-B6EA-467F-9F10-B3C38BDBC024.jpeg446.3 KB · Views: 45
-
BED818D0-BCF3-4A24-A014-86139FE47747.jpeg450.6 KB · Views: 38
-
AC9DAFCB-AA0C-4400-A892-DF8D570FDABA.jpeg271.3 KB · Views: 46
-
4FC9CC5B-3DA1-47C9-909B-DDD653401922.jpeg1.1 MB · Views: 50
Last edited: