Rifle Scopes Spuhr mount for TRG42 with USO Tpal

[xbrute]

Hey guys looking to update my scope mounts on my Trg42. I've had a look around but can't see a 1 piece spuhr mount 20/40 moa to direct fit onto the dovetail of the Trg and fit the US optics Tpal with a 30mm tube. Need a bigger gap between the rings. Otherwise will go the rail and separate rings route.

 

[xbrute]

Anyone?

 

[Spuhr]

That is correct, we don't have any mount for 30mm t-pals.
We do have longer mounts for 34 and 35mm Tpals but those are picatinny mounts and not direct TRG mounts.

The TRG mounts we make are for 30 and 34 mm but are to short for T-Pals.
That said we have a production on over 50 different models of tactical scopemounts, so I belive we probably have the biggest variety of tactical scopemounts by any manufacturer.

And you are right, the only thing we can offer for the 30mm T-pal is the 1" high separate rings.

Håkan

 

[xbrute]

Thanks for the reply, what is the mount width on the inside ring to ring on the TRG mount. Thanks again

 

[Spuhr]

2,24" for 34mm and 2.44" for 30mm

 

[pc3]

What is the model designation required for a 5-25 USO T-PAL with 34mm tube ? One with say 10moa built in slope if available.

Cheers pc3

 

[Spuhr]

We have 3 models that works with 5-25 T-pal.
All are 1,5" high
SP-4003b =omoa
SP-4603b=6mils/20,6 moa
SP-4803b=11mils/40moa