Spuhr Mount Wedge

[TXAZ]

I'm looking at a Spuhr mount, and didn't get a definitive answer from the vendor.
They don't have any QDP -4006 but do have the similar with a 20MOA / 6MIL wedge, the QDP-4606. They indicated the wedge could be removed but I can't find any documentation on it.
So the question is to you Spuhr experts, can a Sphr 46xx be easily converted to a Spuhr 40xx by easily removing a wedge?
(thanks db2000 for the correction)

 

[TheOE800]

I have only seen/heard of a leveling wedge that fits the slot machined into the base to level the optic, not change the incline…though I haven’t had a Spuhr mount in years.

 

[db2000]

I think you’re misunderstanding or confusing the wedge for leveling and 6 MOA cant, which is a permanent feature of the mount to allow for more elevation in your scope. Also, it’s 6 MIL not MOA

 

[TXAZ]

Thanks db, fixed the original post MOA/MIL.

I think the sales guy was confused. My understanding is the 10 degree wedge is for leveling the scope left right to the rail as you noted.
But I don't think there is another wedge / cant / piece that can come in or out of the 20 MOA / 6 MIL mount that makes that mount a 0 MOA / MIL mount. Correct?

 

[secondofangle2]

The wedge is for installation only

 

[db2000]

Thanks db, fixed the original post MOA/MIL.

I think the sales guy was confused. My understanding is the 10 degree wedge is for leveling the scope left right to the rail as you noted.
But I don't think there is another wedge / cant / piece that can come in or out of the 20 MOA / 6 MIL mount that makes that mount a 0 MOA / MIL mount. Correct?

Correct. There is not that I’m aware of. The leveling wedge is the easy button though. It’s awesome