Spuhr SP-4026 help

[Bryan W M]

I’m looking at getting a Spuhr SP-4026 .
Anyone having any problems with this and a gen3 razor on a AR yes I know it was made for this .

Right now I have a 1.5 mount and .25 of foam on the stock.

 

[_Windrider_]

I’m looking at getting a Spuhr SP-4026 .
Anyone having any problems with this and a gen3 razor on a AR yes I know it was made for this .

Right now I have a 1.5 mount and .25 of foam on the stock.

Need to know more about the scope and rifle. Is it and AR10 or an AR15? I ask because typically AR receivers are 0 MOA so you may want to consider a 20 MOA mount. Objective clearance will be your biggest issue if the hand guard has a full pic rail.

 

[Bryan W M]

AR-15 . 1-10 razor gen3
Don’t use the turrets just hold over. My steel only goes to 300 yards. When I get the deck on the house I can get out to 500 yards max so no need for 20moa.

 

[_Windrider_]

AR-15 . 1-10 razor gen3
Don’t use the turrets just hold over. My steel only goes to 300 yards. When I get the deck on the house I can get out to 500 yards max so no need for 20moa.

You’ll be fine. That’s a good combo. You might consider a badger ordnance cantilever if you want to save a little scratch.

 

[Bryan W M]

I have the badger on it and like it. I really want to get the foam off the stock . It’s come loose twice in the past year. The SP-4026 is the only 1.26 cantilever I know about.