Table of Mk13 Actions which will be coming available

Lowlight

Lowlight

HMFIC of this Shit
Staff member
Moderator
Supporter
Minuteman
    • Apr 12, 2001
    35,949
    42,198
    Base of the Rockies
    www.snipershide.com
    #1
    I saw a table full of real (and marked) Mk13 Actions along with Spec Accuracy International Mk13 Chassis

    10325588_10152433057467953_353419503862744851_n.jpg


    Might get interesting for those willing to pony up and build a Spec Mk13
     
    #4
    Thanks!

    I see the metal parts are not blk like the ax but the same coloring as the psr?

    What about the action, what is different about it?
     
    #5
    It's a Stiller action, this is the Military's Mk13 which is made by Crane for the SEALs, Rangers, etc... it has nothing to do with an AI, AX other than they use the AI AX Chassis for the built.

    it's apples and oranges.

    It's just a 300WM that the military uses and not an AI, it's Stiller, Lilja, AI Chassis composite gun

    Accuracy International AX actions are bonded to the chassis, copies using chassis are not bonded
     
    #14
    And worth every penny. I'll have to get one on the secondary market I guess, need to finish my M40A1 parts gathering so I can have an A1 built before I PCS and then maybe a Mk13. I have fondled the real deal here at one of the MARSOC armories. Very slick rifles. To do it right with the spec optic you will be north of $7k depending on what kind of deal you can get on the scope and the barrel work. Good luck everyone :).

    Lowlight said:
    Probably be about $3k for both without any work, maybe a tick over but that is what they go for.
    Click to expand...
     
    #16
    Already have mine...including pipe.

    Deviating with: can (going bigger with Titan QD), Huber two stage, Atlas PSR, but also doing up a harris notched leg swivel to try, and some goodies from Victor Co. (grippy cheek rest, spacers, rear sling adapter) and surgeon adj. buttplate.

    Chassis is no less than four colors, but quite cool, the action rail is a nice perk along with the shorter tube to cut down weight.
     
    #17
    Where can we get the exact specs on the MK13 mod 6 and mod 7 ?? I really cant find an accurate answer. Stiller action, verified by press release. Chassis AI, spoke to them. Looking for trigger, barrel and length with contour muzzle devise ( im =
     
    #21
    scatsob said:
    And worth every penny. I'll have to get one on the secondary market I guess, need to finish my M40A1 parts gathering so I can have an A1 built before I PCS and then maybe a Mk13. I have fondled the real deal here at one of the MARSOC armories. Very slick rifles. To do it right with the spec optic you will be north of $7k depending on what kind of deal you can get on the scope and the barrel work. Good luck everyone :).
    Click to expand...


    Scatsob, do you have any pics of those MK13 from the Marsoc armory? Im looking to build a MK13 Mod5 in the future. Just wondered if there was any special markings on those rifles or not. Thanks
     
    #34
    Killswitch Engage said:
    apparently these bad ass's still think woodland rocks and harris bi-pods too....considering they can have anything thing they want. hmmm
    Click to expand...

    Yeah, there was a move back to the woodies by a number of units a few years ago. One of the reasons I was given was that a good portion of the ANSF were issued woodlands, so the guys partnered up with them wore it as well. I still have my crusty old woodies, but they shrunk while in storage. ;)
     
    #37
    Killswitch Engage said:
    lol i hear ya. mine seem to have too. can you buy these high speed woodies anywhere?
    Click to expand...

    I'm guessing those are probably Crye Precision woodies. If they are, then they're not the same animal that we wore and be prepared for the sticker shock.

    I'm just happy I have no desire for a 300 WinMag, otherwise I'd be going into debt trying to put one of these bad boys together.
     
    #38
    Well, I'm gonna do the win mag and stiller action. Since I do my
    own work it won't hurt so bad. Still painful nonetheless lol. Can't see any
    good reason not to have a heavy weight in the stable. Cheaper then spoon feeding a lapua. Ha
     
    #43
    teufelhunden said:
    Had to revive this, considering ditching the Mod 5 chassis for the Mod 7

    This is from Travis Haley's facebook page. Not sure, MARSOC or if its a Mod 6 or 7?

    Click to expand...

    Look hes got one of those Shitty SR-25/M110K1 that everyone on the hide thinks is overpriced shit. Somebody tell him before he accidently takes it into a combat zone and gets his whole team killed.
     
    #44
    Lowlight said:
    It's a Stiller action, this is the Military's Mk13 which is made by Crane for the SEALs, Rangers, etc... it has nothing to do with an AI, AX other than they use the AI AX Chassis for the built.

    it's apples and oranges.

    It's just a 300WM that the military uses and not an AI, it's Stiller, Lilja, AI Chassis composite gun

    Accuracy International AX actions are bonded to the chassis, copies using chassis are not bonded
    Click to expand...

    So, question -- When I was ordering the Tac 300 @ 1.5yrs ago, I had originally tried to get a MK13...I was told they were practically the exact same thing...Don't bother trying were actually the exact words used when I was hunting one down.

    It's always been a "mystery" as to what the difference are. What are the actual differences between the Tac 300 LA and the MK13?

    Is it worth picking up if you already have a Tac 300 LA?
     
    #45
    I wouldn't get to excited. if they are really the mk13 actions, they are not that good. I was using one out here in the desert with the new S&B scope. it was a very sloppy action, honestly it wasn't much better than a stock rem700 action. it is reasonably accurate, but nothing to write home about. personally, i don't care for the AICS chassis, but to each his own on that one. there are a lot better actions to buy
     
    #46
    mpk1996 said:
    I wouldn't get to excited. if they are really the mk13 actions, they are not that good. I was using one out here in the desert with the new S&B scope. it was a very sloppy action, honestly it wasn't much better than a stock rem700 action. it is reasonably accurate, but nothing to write home about. personally, i don't care for the AICS chassis, but to each his own on that one. there are a lot better actions to buy
    Click to expand...

    To my knowledge, that's always been a bolt issue, especially per the Tac 300s.

    My buddy and I ordered Tac 300s at the same time...His was tight, mine was sloppy, we swapped bolts and both are now perfect.

    PTG makes the bolts if I'm not mistaken...

    Not making an excuse as to why they're sloppy, just saying that it's a rather easy fix if that is the situation.
     
    #49
    I'd read there was a minor finishing difference that I doubt anyone could noticed, the radio tag is the big difference along with different engraving. Not sure I would get bent out of shape to get a MK13 action over a TAC300 unless you were bent on creating a clone to spec. I've got one of the actions and chassis, it's in progress, but not keeping it to spec.
     
    #50
    Cowbiker said:
    I'd read there was a minor finishing difference that I doubt anyone could noticed, the radio tag is the big difference along with different engraving. Not sure I would get bent out of shape to get a MK13 action over a TAC300 unless you were bent on creating a clone to spec. I've got one of the actions and chassis, it's in progress, but not keeping it to spec.
    Click to expand...

    Yeah, I posted mine in the other MK13 thread.

    The only differences are the finish, tag and engraving -- Otherwise, same action. -- The bolts are a little different too but, that's nothing that you can't order from PTG, either.
     
    You must log in or register to reply here.

    Similar threads

    USMCSGT0331
    Prototype Stiller Mk13 receivers
    Replies
    12
    Views
    764
    nn8734
    nn8734
    P
    Firearms USMC Mk13 Mod 7 300WinMag
    Replies
    6
    Views
    2K
    kft101
    K
    NukeMMC
    SOLD RW Snyder-built 300WM custom rifle - R721 action
    Replies
    15
    Views
    1K
    NukeMMC
    NukeMMC
    Werk125
    SOLD WTT: McMillan A2 MK13 Mod 0 / 3 Stock for Stiller MK13 Action (or Rifle) - Build Kit Also Available
    Replies
    6
    Views
    956
    Pizzayne22
    P
    reximus
    SOLD Accuracy International "AT" in 6mm GT
    Replies
    20
    Views
    2K
    reximus
    reximus
    Top Bottom
    Back
    Home
    Forums
    Merch
    Alerts