-
Having trouble using the site?
Contact support
Talk me out of a folder
- Thread starter Hawkeyemm
- Start date
Doubtful. It tends to extend the LOP, but I'm sure it's plenty strong to withstand the forces of recoil.
Thanks Minnesota. I didn’t mean to imply it wouldn’t withstand recoil. Rather, if there might be enough play as to affect shot mechanics. I know it’s a $100 upgrade but it seems that I see a surprisingly small number of folders.
I'm willing to bet the lack of folders has more to do with budgets, than mechanics.
My experience has been they all get a little play in them at some point. It’s probably just a matter of time. Mpa could be the exception but there’s only one way for you to find out for sure. Congratulations on your build and good luck 
I bought a folder (MDT ACC) but mainly because I wanted to be able to shorten the rifle for transport and bags and if I decide to carry it longer distances.
Looking at the mechanics, I would doubt it would develop any play unless it was seriously abused (more so than run of the mill abuse).
Looking at the mechanics, I would doubt it would develop any play unless it was seriously abused (more so than run of the mill abuse).
If a given chassis system (or rifle) is produced with folding and non-folding variants always buy the folder. There is absolutely no compromise to precision potential of the rifle because of the folding feature. If you decide to sell, you have a larger market since most prefer folders to fixed stocks.
The caveat is that the manufacturer in question is a competent maker of chassis systems. MPA (what you’re considering), AI, MDT, Barrett, Cadex are a just few such manufacturers.
Last edited:
Once you go folder, you never go back. ...providing you buy from a quality manufacturer...and don’t move to a place that has stupid laws that prohibit folders.
No data on my end to suggest this has any perceivable impact on accuracy. I have 2x folders (KRG and AI), both are super tight lock ups. I do admit, traveling/storing them are more pleasant than the full length stocks.
From what those who own them are saying you have nothing to worry about. The owners of fixed chassis are just hating on the guys who have folders. The engineers probably figured out a design to prevent the problem. I’ll find out soon enough because I’m expecting a Krg Whiskey 3 folder in a couple of days. I sure hope you guys are right 
Probably the lightest of all the chassis listed in this thread is the XLR Carbon folder I'm using and there is nothing flimsy about it and locks up tight when properly adjusted.
Thanks for the sentiment. I’ve got the scope. Bipod on the way. Now all I have to do is settle on a caliber, choose an action, determine what barrel to go with, and wait for the reloading fairy to magically leave some reloading components under my pillow.My experience has been they all get a little play in them at some point. It’s probably just a matter of time. Mpa could be the exception but there’s only one way for you to find out for sure. Congratulations on your build and good luck
My experience has been they all get a little play in them at some point. It’s probably just a matter of time. Mpa could be the exception but there’s only one way for you to find out for sure. Congratulations on your build and good luck
And thanks to everyone for all the input. I was pretty sure I wanted a folder and you guys settled it. I still would like to get behind a few different chassis before I purchase but at least my fears about a folder have been assuaged.
X2 on the MDT ACC. I have one and when it locks up it locks very solid, no play. It also locks folded so there is no flopping or movement there either. I like that it folds to the bolt side to minimize thickness when storing in a hard case..
Cleaning alone makes a folder worth it. I think they’re all about nice in their own ways. Many different systems out there. Similar premise on most. KRG has a rather different approach which I like quite well. Has not caused me any accuracy issues. Some systems are tighter than others.
Can’t talk you out of one unless add’l cost is a deal breaker. They are functionally versatile for transport and cleaning.
The Gen 2 XLR folder can be adjusted to lock up tight. The KRG W3 folder locks up better than the XLR, but the hinge protrudes more.
The Gen 2 XLR folder can be adjusted to lock up tight. The KRG W3 folder locks up better than the XLR, but the hinge protrudes more.
What is your favorite reason to use the folding feature? Or when do you use it most?
I went fixed on my AI AT. Figured if I was gonna pay that much for the left side folder I’d be better off buying the AX right side folder and swapping. That hinge was over $500 more for me.
For my MPA chassis I went with the folder. So much easier when cleaning. Don’t have to touch the cheek piece to remove the bolt or run a rod in. Can use my 46” drag bag vs the 52” when transporting. This makes things a lot more convenient. Completely worth it.
For my MPA chassis I went with the folder. So much easier when cleaning. Don’t have to touch the cheek piece to remove the bolt or run a rod in. Can use my 46” drag bag vs the 52” when transporting. This makes things a lot more convenient. Completely worth it.
It just makes cleaning, bore (obstruction) checks, bolt removal, storage, and transport much easier/user friendly. Is it needed? No. But it’s one of those things that once you use, it will become a requirement on wish lists for future purchases lol.
I have an MDT ESS rigid and my friend has the same chassis in a folder. I’ve shot them side by side and can’t tell any difference in the mechanics or rigidity. Any good chassis manufacturer would make sure that their folder is extremely rigid otherwise it would negate one of the biggest advantages of a chassis in the first place. For me it was just a matter of cost.
Barrett MRAD has a folding stock that locks up like a bank vault. No adverse impact on accuracy, precision. Chosen by USSOCOM for their new ASR as MK22. Shortens overall length for packing around, reducing case size, weight. Folds right side locking, protecting bolt handle from hard knocks, and essentially doesn't increase overall width folded. Extended serves all positives of a fixed stock. Love all of mine. Know of, but not familiar with MPA folder. Phil builds good stuff. Would expect it to be first class, as MRAD.
