I’m looking at an ultralight can. I already have a recorded 30BA that uses the CB brake. I also use the ASR brakes on many ARs. Would it make more sense to get a HUB? I’m assuming that this will be lighter & quieter than my recored 30BA? Does the HUB can just screw directly onto the ASR brake?
Suppressors TBAC Dominus CB or HUB
- Thread starter Bri0242
- Start date
The lightest option would be a HUB version with one of our Titanium DT-HUB adapters (direct thread).
The Ultra 7 will suppress the same as the Dominus, but be lighter.
The Ultra 7 will suppress the same as the Dominus, but be lighter.
The Ultra 7 is lighter than the Dominus.
And on the same can, the Ti DTHUB adapter will be a little lighter than a CB brake + CB interface, but not have the retention of the CB interface
And on the same can, the Ti DTHUB adapter will be a little lighter than a CB brake + CB interface, but not have the retention of the CB interface
You need the appropriate HUB adapter which I think is the SilencerCo ASR Bravo if you’re wanting to adapt a 1.375-24 internal threaded suppressor to the ASR mount standard.
I prefer HUB on everything. It makes life so much simpler. You can basically choose whatever mounting system you want to run.
I have a TBAC Magnus-HUB. Love it!
Yes, all kinds of HUB to whatever mount. It’s the future.
1.375-24 Bravo (HUB) Direct Thread Mounts
www.eccomachine.net
Thanks. I have seen the hub adapters but didn’t know Tbac had their own. Wanted to see theirs for my magnus before I bought a oclYes, all kinds of HUB to whatever mount. It’s the future.
1.375-24 Bravo (HUB) Direct Thread Mounts
I'm running the OCL ZR0-DTA on my Magnus (shown in above post). Very true & straight combo. Quality mount with a quality can = precision setup. Shoots pretty damn good on my factory 700 5R Milspec .300WM...
It was funny, the dealer was recommending not using a Dominus on a 12.5" .308 barrel, even though they posted a TBAC video showing that it would work. I told him that the website stated that it could be used...
I'd be finding a new dealer, because he obviously doesn't know how to either A) be honest or unbiased, B) use the internet, or 3) read up on the products he sells. Run Forrest, run!
No idea, but the Otter Creek Labs ZR0-DTA is a precision built mount. I run one on my Magnus-HUB, and it's straight and true. It's made from Grade 5 Titanium, has a PVD coating, and only weighs 1.1 oz. It also is designed to eliminate your can sticking out from your barrel by recessing the female threads slightly inside the blast chamber. Works really well.
ZR0 DTA | Otter Creek Labs
Made to work with industry standard 1.375x24 threaded suppressors the ZR0 DTA was made to add as little length to the system as possible. $95.00
ottercreeklabs.com
EA makes one, you can get one here: https://hansohnbrothers.com/shop/en...ons/energetic-titanium-direct-thread-adapter/
Abel makes a nice DT adapter as well, though I don't think it's titanium:
Just Ordered a Magnus with Hub. TBAC is awesome to deal with. Big shout out to Blake.
