Tbac Magnus rr

[J7993]

TBAC What length Magnus RR are the 6 mm guys are going with K or S ?

 

[DeathBeforeDismount]

K

 

[J_D]

Has anyone gotten any of these delivered or have a pending date?

 

[DeathBeforeDismount]

I don't think so. Everyone I know who got in early is still waiting for serial number to be assigned, even thought they hit the target date.

@TBACRAY might be able to provide an update. Mine is still about a month away from serial number assignment according to their system.

 

[J_D]

I don't think so. Everyone I know who got in early is still waiting for serial number to be assigned, even thought they hit the target date.

@TBACRAY might be able to provide an update. Mine is still about a month away from serial number assignment according to their system.

Thanks! Haven't really seen any and was hoping these were starting to roll off the line.

 

[kurtispalu]

I run a 6 creedmoor and really like the S length on it. If you are running a Dasher or small 6mm you might consider the K but you are giving up suppression for length. If you are familiar with the Ultra 5, 7 and 9. Going from the S to the K is like going from an Ultra 7 to an Ultra 5. Both the S and K will have very similar if not identical recoil energy reduction. If you are considering shooting it on anything other than the small 6mm I would suggest bumping up to the S length.

 

[FuhQ]

I don't think so. Everyone I know who got in early is still waiting for serial number to be assigned, even thought they hit the target date.

@TBACRAY might be able to provide an update. Mine is still about a month away from serial number assignment according to their system.

I got in early, and it’s been at my dealer, and I’ve been certified and waiting on approval for nearly a month… and prior to that, It only took mine 4 weeks to the day from purchase to arrival at the dealer.

 

[D_TROS]

I run a 6 creedmoor and really like the S length on it. If you are running a Dasher or small 6mm you might consider the K but you are giving up suppression for length. If you are familiar with the Ultra 5, 7 and 9. Going from the S to the K is like going from an Ultra 7 to an Ultra 5. Both the S and K will have very similar if not identical recoil energy reduction. If you are considering shooting it on anything other than the small 6mm I would suggest bumping up to the S length.

this. even for small 6's

 

[C130]

What would be the suggestion for 6.5cm? I’ve been looking at several suppressors and trying to decide, thanks.

 

[DeathBeforeDismount]

Depends how much you want to chop your barrel and what you want for OAL. I have a full size magnus and its great but its like 32" OAL with a 23" barrel. So it depends on how much length you want, and what kind of ballistics you are looking for. Also, are you competing in something like PRS with length can hinder ability to move around props?

I think a good all around can would be the Magnus S RR. Or go with with Magnus S without RR if you dont care about recoil reduction as much.

 

[C130]

Depends how much you want to chop your barrel and what you want for OAL. I have a full size magnus and its great but its like 32" OAL with a 23" barrel. So it depends on how much length you want, and what kind of ballistics you are looking for. Also, are you competing in something like PRS with length can hinder ability to move around props?

I think a good all around can would be the Magnus S RR. Or go with with Magnus S without RR if you dont care about recoil reduction as much.

Thanks, I haven’t done any PRS matches but would like to in the future. I’ve been practicing some so overall length might be something I should be concerned about since I’d like to eventually do some PRS matches. The RR got my attention when I was researching suppressors.

 

[jthor]

Has anyone gotten any of these delivered or have a pending date?

They should have been done with the first batch a few weeks ago, but they rejected them from the coaters and had to send the back to get recoated.

 

[Bakwa]

Has anyone gotten any of these delivered or have a pending date?

The combination of their new product releases this year and the stupid short approval times the industry is witnessing has created quite the backlog in orders.
They are much further behind than expected. Nobody could have anticipated the ATF all of a sudden becoming more efficient and the effect it would have on supply and demand in the industry.
I was going to buy two TBAC cans direct, but am holding off on the rush, because I likely won't see them before hunting season this coming year.

 

[jthor]

Also, just checked my order and my RR suppressor as had a serial number allocated to it since 6 May.

 

[FuhQ]

Also, just checked my order and my RR suppressor as had a serial number allocated to it since 6 May.

It will also tell you on their website what status the paperwork is in... If the Form 3 has been filed and waiting on approval for them to ship it to your dealer, it will tell you. Once approved, the can ships, and your order is listed as "complete" or "fulfilled", and at that point it's on the dealer to get off their ass and get your Form 4 paperwork underway and to the ATF for certification.

 

[jthor]

My Magnus RR can shipped

 

[J_D]

My Magnus RR can shipped

I hate you.....

 

[J_D]

Looking forward to the review.

 

[DeathBeforeDismount]

Mines awaiting for 3. Got a feeling a bunch of us will get these out of jail around the same time. Almost makes you want to become a SOT so you can shoot stuff while in jail.

 

[TheOE800]

Maybe I should have got the mid size RR..

 

[FuhQ]

Here's how quiet my Magnus-S HUB (non-RR) can is on a 16" .308 Win with subs...

Be sure to go give it a like and share it on your socials, with YouTube harassing 2A content, every little bit of help is greatly appreciated.

 

[ID_Matt]

I’m in for a K RR. Main deciding factor for me was length. Using it for competition, I’ll be wearing ear pro any way and the recoil reduction is similar to the S.

 

[Cody S]

what about cleaning? my cb ultra 9 is a breeze to clean.