The MK12 at home…by PSA

Triggerman_D

Private
Minuteman
Mar 28, 2023
10
1
Ft. Lauderdale
IMG_4935.png
Thoughts?
 
Love it. PSA is killing it.

Sure, I'll go buy the PRI upper personally, but there are PLENTY of folks who are not willing, or possibly able to drop that kind of money on a complete upper. This is a complete rifle for (I think, correct me if I'm wrong) the same price as a PRI upper. And it will likely shoot very well with match ammo.
 
The BCG would not drop into the receiver. My MI upper rod would stop about half way as well. I tried 8 different BCG's (BCM, Geisselle, Toolcraft, Centurion) and none would go in. The BCG should drop into that receiver with it being held vertical. The bore was clearly tapered in the machining process. I could force one carrier in, but it was dragging hard. The one in the picture is a brand new BCM group.
 
PRI's webpage says $2,220.00... where are you seeing "the same pricing" ?
yep you can get the complete psa clone for the price of a PRI upper assemble . the complete rifle from PRI is as you stated 2.220. 00 . To be honest I have no issue with PSA but when your that close to the real deal I would pony up the rest of the cash and let PRI put 0ne together for me .
 
The BCG would not drop into the receiver. My MI upper rod would stop about half way as well. I tried 8 different BCG's (BCM, Geisselle, Toolcraft, Centurion) and none would go in. The BCG should drop into that receiver with it being held vertical. The bore was clearly tapered in the machining process. I could force one carrier in, but it was dragging hard. The one in the picture is a brand new BCM group.
I've been around PSAs that worked fine. I love what they are doing as a company on the whole.

However their awful QC and QA needs to be worked on. They are becoming so large that I really don't see an excuse for it anymore. Hire more guys to do nothing but QC before stuff gets boxed up. It's not hard. BCM has videos on their channel showing how simple these simple QC checks are. Even Windham Weaponry talked about how they had QC steps for each upper/rifle and they test fired them all before boxing them up.
 
I agree. I am a QC guy at my job so it is an easy fix for their operation. Clearly they have the funds and people to do it. Maybe it's cheaper to just not QC and handle warranty as needed.
 
  • Like
Reactions: BCP
If you aren’t paying for the gun or the ammo - your opinion means nothing at all.

I think I need to buy one and post lots of pics of it just to get some of the anti-PSA motherfucker’s panties all twisted and their pussy’s hurting. This shit is entertaining as hell to watch. Like the Glock purists whining when somebody posts a pic of a 1911, or even the other way around.

So you try to swap in parts from another manufacturer and all of a sudden it doesn’t fit and it’s the gun’s fault? Pull the starter off your Lambo and see if it fits your Dodge. WTF? I guess you never heard the fact that AR10’s aren’t all to the same spec?

Yeah, I know.
You ain’t shit unless yo are driving a fucking Lambo.
How DARE you have a Chevy or a Ford!
And worse yet.... you post a picture of it!

Haters are gonna hate!
Bring it motherfuckers!
 
  • Haha
Reactions: JS8588
While I wouldnt bet my life on a PSA, then plinkers/beaters I have had from them all ran just fine. Every one needed a lot of oil to run properly though. I used one of their 18" 308s to ring steel at 1,000 for almost a year. Eventually installed a 338 fed barrel on it and my son has taken it all over the world hunting.
 
I've been around PSAs that worked fine. I love what they are doing as a company on the whole.

However their awful QC and QA needs to be worked on. They are becoming so large that I really don't see an excuse for it anymore. Hire more guys to do nothing but QC before stuff gets boxed up. It's not hard. BCM has videos on their channel showing how simple these simple QC checks are. Even Windham Weaponry talked about how they had QC steps for each upper/rifle and they test fired them all before boxing them up.
Individual QC of parts costs money. You don't get bargain bucket prices from companies that individually check each product. And sometimes even with companies that do, one slips through.
 
If you aren’t paying for the gun or the ammo - your opinion means nothing at all.

I think I need to buy one and post lots of pics of it just to get some of the anti-PSA motherfucker’s panties all twisted and their pussy’s hurting. This shit is entertaining as hell to watch. Like the Glock purists whining when somebody posts a pic of a 1911, or even the other way around.

So you try to swap in parts from another manufacturer and all of a sudden it doesn’t fit and it’s the gun’s fault? Pull the starter off your Lambo and see if it fits your Dodge. WTF? I guess you never heard the fact that AR10’s aren’t all to the same spec?

Yeah, I know.
You ain’t shit unless yo are driving a fucking Lambo.
How DARE you have a Chevy or a Ford!
And worse yet.... you post a picture of it!

Haters are gonna hate!
Bring it motherfuckers!

Literally nobody is going to care if you want to piss away your money on trash. NOBODY.

As to parts not fitting, AR-15’s are to a spec and the only reason parts shouldn’t be interchangeable across different brands are if one of them is absolute hot garbage.

The only person with twisted panties and a hurt pussy is you because you like trash and some people pointed out the obvious.