Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Might have been earlier in this thread I saw someone had a Vortex Defender cap on theirs, just measure diameter and order, I've been thinking of doing the same as the cap from Steiner is horribleOkay who's got the line on a cap for the occular side of these?
E10 and O44 defender caps for ocular and objectiveOkay who's got the line on a cap for the occular side of these?
That's the defenders, and they work, but if you're on a full-length pic rail the cap hinge will hit it. You'll be limited to about 3/4 of a turn to focus the ocular unless you remove the cap.
I was worried that might be the caseyou'll be limited to about 3/4 of a turn to focus the ocular unless you remove the cap.
Same....that's how I knowFull rails on everything
Either from menu on thermal screen or from app. In one of the image menus…The cap on my unit sucks ass.
I have to twist it on. Takes forever. Then there is no such beast for the lookie end.
Anxiously waiting on you guys to figure it out.
Also, how do you do PIP? I thought I read that this unit did picture in a picture. Not a gamechanger either way for me, but I would like to know how to use it.
Wait, there's an app? I guess I need to read my instructions what is the app called? Can you set all the settings from the app itself as I find the menu to be a pain.Either from menu on thermal screen or from app. In one of the image menus…
Wait, there's an app? I guess I need to read my instructions what is the app called? Can you set all the settings from the app itself as I find the menu to be a pain.
OMG, even betterBro... The app is what makes it cuz yes all the settings are controlled from it including zeroing.... Lol
Steiner connect
The app is where it’s at. I have kinda used my C35 as a scanner with it. Mount it to the tripod, and view through app on phone screen.OMG, even better
App is pretty simple to play with. I growed up in Arkansaw pubic skool and fingered it out kindly quickGood luck on finding some instructions on how to use it though. I downloaded the app but haven't played with it much.
But it looks like its going to be a trial and error of figuring this shit out.
I had done enough volume by the time I got to the part where I was making guessing at the 2 idiots still standing around after the chaos!! I'm pretty sure I was sending rounds way over the top, with way too much hold.Accuracy through volume.
Finally got to get out with my C35. A coyote and a couple if pigs down. It takes a bit of getting used to kinda having to run 2 optics at once, compared to just using my Super Hogster. I need to get the range finder thing up on it. We got on a bunch of hogs, and once the sounder ran, I had no idea what hold I needed.
Using a Vortex PST 1-6x. First time using this scope outside the range. I may end up swapping out that scope for another 1-6x power which has a fully illuminated reticle. The red dot on the PST gen 2 is almost too bright. The reticle wont really work well if you like black being hot. It work for me with white hot, but i think having a dull, red full reticle maybe the ticket. The other thing i have thought about is a 2-10x FFP PST. Above 6x is worthless with the clip on IMO.Looking forward to getting mine out soon.
Curious as to what scope and what magnification you were running.
Also, what was the range you were shooting at?
Anything you would set up differently the next time?
Thanks
So that brings up a good point.
I have played around in the yard with mine on several different rifles and found that the parallax needed to be adjusted to as close as possible. I seemed to get 100% of image focus through the Steiner focus ring and parallax did nothing.
What is your experience with using the parallax on your rifle scope?
This is something that is on my to do list this weekend to test. I've got a super consistent bolt gun to zero the C35 on and wanted to see what/if any shift is induced due to flex by putting a heavy load on the bipod. I will probably do that at 200 yd.I'm referring to the big problem with non columated clip-ons. Maybe a beller example is bipod deflection: when you rest/load your rifle on a bipod you are applying to the end of your handguard ( ar 15 platform) causing the barrel to change its relative position in relation to the handguard. Your thermal is mounted to the end of your handguard, when add or remove pressure to you handguard via bipod or tripod or even a rifle rest, your thermal clip on changes position in relation to your barrel. Effectively changing your point of aim slightly.
If I'm not making enough sense shoot me a pm with your number and we can talk about it
As close as I can without worrying about any contactAre you guys just mounting the clip on as close as possible to the day optic?
Had an NX8 4-32 then switched to a strike eagle 1-8. Too little FOV with 4x on the bottom end left. Happy I made the switch despite the difference in optic quality.Excellent info. Thank you guys.
I’m planning on using a 4-16 Trijicon but I’m wondering if I need to go 1-10x.
Vortex 1-10 is what you seek.Had an NX8 4-32 then switched to a strike eagle 1-8. Too little FOV with 4x on the bottom end left. Happy I made the switch despite the difference in optic quality.
Probably need to go buy a 1-8 NX8 now.
SB 1-8 short dot was the correct answer.....Vortex 1-10 is what you seek.
Thanks for posting.Here is some video from this past weekend. Again, not the greatest shooting, but there were a lot of hits. The group at the very end we end up shooting at as well.
Here is a coyote video from earlier the same night. I shot an instant before my buddy. Which was good, because he missed completely
Some dude had 3 new ones for $1800 in the for sale sectionI was surprised how expensive the Gen 3 Razor 1-10s are.
I just looked in the for sale.Some dude had 3 new ones for $1800 in the for sale section
I just looked in the for sale.
Didn’t see anything
Do you have the link to that by chance?
Thank you very kindly sir.Optics - WTS: Vortex Razor HD Gen 3 1-10 MRAD with spuhr option
reposting these for sale, three New Vortex Razor HD gen3 1-10 MRAD scopes with the option of the pictured 34mm mount. Pricing: - each scope = $1,800 shipped - Spuhr 4808 (34mm 1.7" ) = Sold paypal f&f, venmo f&f or zelle for payment Shipping within USA onlywww.snipershide.com