Looking for a thin cheek piece cover for my Kmw sentinel. I have a triad stockpack, and even with my adj. piece all the way down the stockpack raises my eye to high. I’m not really wanting to buy new rings, so looking for a suggestion.
Thin cheek piece cover for sentinel?
- Thread starter Lrdchaos
- Start date
https://godagrip.com/cheek-pads-2/
They sell thin sheets as well you can cut custom sizes. Good strong adhesive that doesn't damage paint or stocks.
They sell thin sheets as well you can cut custom sizes. Good strong adhesive that doesn't damage paint or stocks.
Try AGrip.I bought a sheet and cut it to fit my ax cheek piece .Looks and feels like a soft suede and has held up well so far.I have a wiebad mini stock pad on my sentinel and run the cheek piece all the way down also.Both work great. If your looking for thin as possible try the AGrip.
Wiebad makes thin cheek piece pads that are custom shaped for each type stock. They make one specifically for the SENTINEL cheek piece.
http://wiebad.mybigcommerce.com/mini-stock-pad/
Definitely thin and nicely tailored to the shape of the CP. Quality materials and fitting.
It looks much better on the stock than the pic they chose for their web page.
http://wiebad.mybigcommerce.com/mini-stock-pad/
Definitely thin and nicely tailored to the shape of the CP. Quality materials and fitting.
It looks much better on the stock than the pic they chose for their web page.
This is what I use for that type of application. Don't get me wrong, there's nothing better than a Weibad stock pad but this is really nice when that will bring everything up too much.
https://www.amazon.com/Darice-Stick...7217&sr=8-13&keywords=sticky+back+foam+sheets
https://www.amazon.com/Darice-Stick...7217&sr=8-13&keywords=sticky+back+foam+sheets
I've been using the peel & stick Foamies sheets to cut out custom thin pads since the mid-90's. They can be had in thicknesses from 2mm to 5mm.
Greg
Greg
Similar threads
