Tikka CTR 20" 6.5 Creed help...

MATADOR

Full Member
Full Member
Minuteman
Mar 5, 2017
525
41
Me and my 14 yr old son are shooting our first local PRS match soon and with work I just don't have time to mess with any more load work up. If anyone is willing to share what bullet/load is working in their CTR it would be much appreciated.

I have H4350 and 140 and 142 Sierra MK's, a few Lapua Scenar 139's and some Hornady 140 HPBT.

41.5 H4350 looks promising looking at old targets but I was curious if anyone had anything better.

Thanks all if you can help.
 
45.8 h4350
Lapua brascci 450
123gr lapua scenar
60 thou jump
Right around 2940 out of my 20inch tikka ctr
Accuracy hovers right around .5moa
 
45.8 grains seems to be quite a stretch. You sure that isn't a typo?

I ran 41.6g of H4350 in my Tikka pushing 142 SMKs and it did well.

Worked up in my rifle and works fine. This is about 1gr before i get pressure signs. Obviously people should work up loads to suit their particular setup. Keep in mind I'm running a 123gr pill.
 
Me and my 14 yr old son are shooting our first local PRS match soon and with work I just don't have time to mess with any more load work up. If anyone is willing to share what bullet/load is working in their CTR it would be much appreciated.

I have H4350 and 140 and 142 Sierra MK's, a few Lapua Scenar 139's and some Hornady 140 HPBT.

41.5 H4350 looks promising looking at old targets but I was curious if anyone had anything better.

Thanks all if you can help.

Out of my Tikka T3x TacA1 6.5 Creedmoor:

Prime/Norma or Hornady Brass
Sierra 142SMK
41.3-41.5 H4350
Federal 210M or BR2 primer
Anywhere between 2.79 and 2.88 OAL and you're in business.

200 yards

20200116_145626.jpg