Gunsmithing Tikka t3 Gunsmith near Dayton Ohio

[SPAK]

Hey guys

Looking for a good smith/machinist who can thread and install a muzzle brake on a tikka t3 lite. Just moved to Dayton Ohio so local would be great. Trying to see if it can be done by the 2nd week of September if possible so I can take it on a hunt. I'd be willing to send it out if turn around isn't too bad.

I know what I'm asking for is a tall order. The smiths I normally use are either busier than snot or don't have the propper tools for the tikka action.

Any help would be great. I've had some bad work done before and I just want to be sure the threads are cut right..

Thanks in advance.

 

[SPAK]

Re: Tikka t3 Gunsmith near Dayton Ohio

Also any reccomendations on a brake? I shoot prone so definitely no 360 deg ports. Any suggestions are welcome. Thanks!

 

[Engine 22]

Re: Tikka t3 Gunsmith near Dayton Ohio

Short Action Customs (Mark Gordon)??

 

[Massoud]

Re: Tikka t3 Gunsmith near Dayton Ohio

There's no special tool required to work on a T3. In fact it's probably easier because the action will fit through the headstock of a larger lathe, unlike a Rem 700 (due to recoil lug).

A good two port tank-style break will be all you need, there's many available. Good luck,
Justin

 

[SPAK]

Re: Tikka t3 Gunsmith near Dayton Ohio

Mark's backed up pretty good and he said he's not rigged up for the Tikkas right at the moment..