TRG load development results

280 AI

Private
Minuteman
Aug 3, 2011
21
2
36
TX
I recently bought a new TRG 42 in .338 Lapua and began trying different handloads. It didn't take long to find the perfect one.

There are a total of 4 shots here and this was done @ 200 yrds. First shot was left so I moved 1 click right and fired the last three shots. This group measured .162"!(3 shot group)

photo-1.jpg




 
Re: TRG load development results

Just went to the range and mv was right around 2804 fps. I fired 8 rounds starting with a clean cold bore and these were the numbers in order: 2807,  2777,  2789,  2801,  2801,  2824,  2807,  2807. Temperature: 99, humidity: 35%, pres: 29.92, alt: 175 ft.
 
Re: TRG load development results

hi All,
im a relative rookie but i have a trg 42 and am ready for some 600 yd and 1000 target shooting , ive got lapua brass shells , some redding comp dies 250 g sierra match points and 88.1 grains of vithori(european stuff) powder how do i find the velocity for entering into a data base ??? would this be a good target load??? thanks
 
Re: TRG load development results

What vith powder are you using? you need to get a chronograph to measure muzzle velocity. The 250 sierra will defiantly get you out to 1000 yards with ease.