TRG muzzle brake any other besides factory?

[alpha6164]

I am looking for a muzzle brake for the Tikka T3 Tactical which takes the TRG 22/42 18x1 L thread. Are there any other muzzle brakes custom or not that someone is willing to thread to match? I am trying not to spend $200+ for a MB if there is something even more efficient that a gunsmith can thread to 18x1 etc? All inputs appreciated.

 

[R.Walters]

Re: TRG muzzle brake any other besides factory?

you could get an unthreaded badger fte and get a gunsmith to thread it

 

[sniperaviator]

Re: TRG muzzle brake any other besides factory?

Near manufacturing makes a TRG muzzle brake. Try nearmfg.com. Call him.

 

[alpha6164]

Re: TRG muzzle brake any other besides factory?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sniperaviator</div><div class="ubbcode-body">Near manufacturing makes a TRG muzzle brake. Try nearmfg.com. Call him. </div></div>


Their brake is also $200 which is not much of an improvement.

 

[alpha6164]

Re: TRG muzzle brake any other besides factory?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KnabstrupperUSA</div><div class="ubbcode-body">you could get an unthreaded badger fte and get a gunsmith to thread it </div></div>


I dont know of any gunsmiths that have the tools for 18x1 L thread. Do you know of any?

 

[Massoud]

Re: TRG muzzle brake any other besides factory?

This might sound crazy but it might be easier to turn your T3 down to 5/8 x 24 threads. You can do this without having to recrown. Then you can buy an off the shelf brake.

If you bought an unthreaded brake, a smith would have to set it up, dial it in, and cut internal metric threads. To cut the barrel, it is a set up and external standard threads, and most smiths with a good lathe shouldn't have to remove the barrel cause the T3 action will fit in the headstock.

Also you will be able to use a standard screw on suppressor later if you want,
Justin

 

[R.Walters]

Re: TRG muzzle brake any other besides factory?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: alpha6164</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KnabstrupperUSA</div><div class="ubbcode-body">you could get an unthreaded badger fte and get a gunsmith to thread it </div></div>


I dont know of any gunsmiths that have the tools for 18x1 L thread. Do you know of any?</div></div> i am not sure but it can be done

 

[zunrj5]

Re: TRG muzzle brake any other besides factory?

Check out the Elite Iron "Max Tac" brake. I have them on both of my TRGs. It has to be timed but IMO its much more effective then the factory or the Near.

-John

 

[Super Bee 950]

Re: TRG muzzle brake any other besides factory?

I dont know how any brake could be mre effective than the Near. I have one for each of my TRG's. On the 300 Mag, it has virtually no felt recoil. Now the people beside me get blown all to hell, but that is another issue.

 

[shoepop]

Re: TRG muzzle brake any other besides factory?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Super Bee 950</div><div class="ubbcode-body">I dont know how any brake could be mre effective than the Near. I have one for each of my TRG's. On the 300 Mag, it has virtually no felt recoil. Now the people beside me get blown all to hell, but that is another issue.

</div></div>

Same for the factory brake damn efficient, bite the bullet and get a Near or factory Sako and be done with it. Don't be re-threading barrels etc., foolishness.

 

[JoeSmith]

Re: TRG muzzle brake any other besides factory?

Plus one to the EliteIron MaxTac. I have shot the factory Sako with a Near and MaxTac side by side and I give a slight edge to the Elite. The Elite also has a very low profile and is only slightly larger than the barrel diameter.
The Near is great also and both outperformed the factory Sako to a noticable degree.
I will post a review of the Roedale with a comparison to allof the above whenever it arrives.

 

[Unknown]

Re: TRG muzzle brake any other besides factory?

I recently bought a brake from RWS who advertises brakes on the forum,...I think it was found in the Optics for sale section. I mailed the money order on December 2, and had the brake in hand exactly like I ordered on December 8.

Maybe he could make one with a 1x18 thread...it would be worth asking him. I also have a TRG, and just never thought to ask him about a brake. I think it cost me $40 delivered.

 

[shoepop]

Re: TRG muzzle brake any other besides factory?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Unknown</div><div class="ubbcode-body">I recently bought a brake from RWS who advertises brakes on the forum,...I think it was found in the Optics for sale section. I mailed the money order on December 2, and had the brake in hand exactly like I ordered on December 8.

Maybe he could make one with a 1x18 thread...it would be worth asking him. I also have a TRG, and just never thought to ask him about a brake. I think it cost me $40 delivered. </div></div>

I sent RWS a barrel to be threaded 18x1 a month + ago. He informed me last week he misplaced his threading equipment so could not do and returning.