Trg22 threads

[karb]

Are the trg22s all threaded?
Are they standard 5/8 x 24 ??

Thanks!

 

[1shot2kill]

Re: Trg22 threads

i believe they are m18x1mm

 

[Shooter McGavin]

Re: Trg22 threads

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 1shot2kill</div><div class="ubbcode-body">i believe they are m18x1mm </div></div>

That is correct

 

[karb]

Re: Trg22 threads

So my choices on a can will be to use a quick detach model ?
I want to swap the can over to a socom, and later onto other bolt guns.
Wouldn't the best solution be to have the trg cut and rethreaded for 5/8x24 ?

 

[skog]

Re: Trg22 threads

Socom FSB/thread adapters are 9/16x24.

 

[Bazgab]

Re: Trg22 threads

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RC in Va.</div><div class="ubbcode-body">So my choices on a can will be to use a quick detach model ?
I want to swap the can over to a socom, and later onto other bolt guns.
Wouldn't the best solution be to have the trg cut and rethreaded for 5/8x24 ?
</div></div>

Yes if you want to use a screw on can that can be shared (though some like the Shark Suppressor have an endcap that can be changed out). If you go with a QD suppressor you could just get flash suppressors/muzzle brakes that are able to mount that suppressor for you different guns.

 

[karb]

Re: Trg22 threads

Yes, screw on for multi use. I've located the socom adapter in 5/8, so it looks like the sako needs to be cut and threaded for it. Crap

 

[mavrick10_2000]

Re: Trg22 threads

Not a big deal, all of my TRG's have had the threads turned down and recut.