I have a customer who wants a muzzle brake on his remington 700 xhr does anyone make a brake that will match the triangle barrel. the guy spends alot of money with me and I would like to help him out
thanks
thanks
-
Having trouble using the site?
Contact support
Gunsmithing Triangle muzzle brake???
- Thread starter Captain Moroni
- Start date
Re: Triangle muzzle brake???
Dont the XTR's have a built in brake? Maybe find a smith that is willing to port the barrel itself. or cut the brake off the XTR and then thread it internally and thread the barrel so the shoulders line up properly.
Dont the XTR's have a built in brake? Maybe find a smith that is willing to port the barrel itself. or cut the brake off the XTR and then thread it internally and thread the barrel so the shoulders line up properly.
Re: Triangle muzzle brake???
XTR has muzzle brake, XHR no muzzle brake but still has triangle barrel, Target Tactical also triangle barrel but no brake.
XTR has muzzle brake, XHR no muzzle brake but still has triangle barrel, Target Tactical also triangle barrel but no brake.
Re: Triangle muzzle brake???
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nuttshooter</div><div class="ubbcode-body">XTR has muzzle brake, XHR no muzzle brake but still has triangle barrel, Target Tactical also triangle barrel but no brake. </div></div>
Can you put the XTR barrel on the XHR that way you keep the triangle barrel. I am sure that there is a smith somewhere with an XTR barrel kicking around that was a pull off and in good shape.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nuttshooter</div><div class="ubbcode-body">XTR has muzzle brake, XHR no muzzle brake but still has triangle barrel, Target Tactical also triangle barrel but no brake. </div></div>
Can you put the XTR barrel on the XHR that way you keep the triangle barrel. I am sure that there is a smith somewhere with an XTR barrel kicking around that was a pull off and in good shape.
Re: Triangle muzzle brake???
Moroni, oh title of liberty bearer,
Just put a carbide blade in your circular saw and three violent cuts later your XHR is an XTR.
That's probably how they do it at the factory.
You might have to shoot a few rounds to get rid of the burrs.
(Don't try this at home or at least use someone else's gun).
Moroni, oh title of liberty bearer,
Just put a carbide blade in your circular saw and three violent cuts later your XHR is an XTR.
That's probably how they do it at the factory.
You might have to shoot a few rounds to get rid of the burrs.
(Don't try this at home or at least use someone else's gun).
Re: Triangle muzzle brake???
I know this is an old thread, but did anyone ever find out anything about threading a triangle barrel?
I know this is an old thread, but did anyone ever find out anything about threading a triangle barrel?
Re: Triangle muzzle brake???
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Big Green</div><div class="ubbcode-body">I know this is an old thread, but did anyone ever find out anything about threading a triangle barrel? </div></div>
Its been done ...... buddy of mine had his threaded for his can by a local smith.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Big Green</div><div class="ubbcode-body">I know this is an old thread, but did anyone ever find out anything about threading a triangle barrel? </div></div>
Its been done ...... buddy of mine had his threaded for his can by a local smith.
Re: Triangle muzzle brake???
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Big Green</div><div class="ubbcode-body">I know this is an old thread, but did anyone ever find out anything about threading a triangle barrel? </div></div>
Its been done ...... buddy of mine had his threaded for his can by a local smith. </div></div>
Thanks. Did he say if the smitty had a difficult time with it?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Big Green</div><div class="ubbcode-body">I know this is an old thread, but did anyone ever find out anything about threading a triangle barrel? </div></div>
Its been done ...... buddy of mine had his threaded for his can by a local smith. </div></div>
Thanks. Did he say if the smitty had a difficult time with it?
Re: Triangle muzzle brake???
the threading shouldn't be all that difficult. with proper setup, the interrupted cut shouldn't be a problem.
as for the original post, anyone with a mill and an indexer should be able to make a triangle brake that will semi-match the barrel
the threading shouldn't be all that difficult. with proper setup, the interrupted cut shouldn't be a problem.
as for the original post, anyone with a mill and an indexer should be able to make a triangle brake that will semi-match the barrel
Re: Triangle muzzle brake???
Reviving this thread again. Anyone know of any shops threading these barrels? I sent a few emails out a couple of days ago to a couple but haven't heard anything back yet.
Reviving this thread again. Anyone know of any shops threading these barrels? I sent a few emails out a couple of days ago to a couple but haven't heard anything back yet.
Re: Triangle muzzle brake???
Hi the REm brakes are a joke and seriously dont even try to duplicate that abortion if you have cut as many off as we do and recrown the rifles so they shoot properly and actualy saw how little gas hits the baffles they are a gimmic.
Any gunsmith that fits brakes and thread your barrel and fit a brake to is for you if you were in Australia we would do it for you. the barrrel can be spun up with a live centre and the triangle section turned round then re centre the bore with a piloted centre and re cut the thread diameter with the bore back on the floating pilot. this way it will be centred to the bore. then cut the thread and fit and index a good brake to the barrel. after the brake is fitted you can bevel the 3 scolops to the barrel in the mill and the customer will be happy. contact SSG gunsmithing Nate makes a great brake and i am sure he would fit a brake for you but any of the hides gunsmiths should be able to do it for you. also make sure you run the thread ont he steady afterwards and re crown it to make sure you have not damaged it.
Hi the REm brakes are a joke and seriously dont even try to duplicate that abortion if you have cut as many off as we do and recrown the rifles so they shoot properly and actualy saw how little gas hits the baffles they are a gimmic.
Any gunsmith that fits brakes and thread your barrel and fit a brake to is for you if you were in Australia we would do it for you. the barrrel can be spun up with a live centre and the triangle section turned round then re centre the bore with a piloted centre and re cut the thread diameter with the bore back on the floating pilot. this way it will be centred to the bore. then cut the thread and fit and index a good brake to the barrel. after the brake is fitted you can bevel the 3 scolops to the barrel in the mill and the customer will be happy. contact SSG gunsmithing Nate makes a great brake and i am sure he would fit a brake for you but any of the hides gunsmiths should be able to do it for you. also make sure you run the thread ont he steady afterwards and re crown it to make sure you have not damaged it.
Re: Triangle muzzle brake???
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wild_Bill</div><div class="ubbcode-body">Hi the REm brakes are a joke and seriously dont even try to duplicate that abortion if you have cut as many off as we do and recrown the rifles so they shoot properly and actualy saw how little gas hits the baffles they are a gimmic.
contact SSG gunsmithing Nate makes a great brake and i am sure he would fit a brake for you but any of the hides gunsmiths should be able to do it for you.</div></div>
The Tactical Target thankfully does not have those stupid scallops that the VTR (or whatever it is) has. Mine is just a weird triangular barrel that I would like some threads cut on.
Thanks for the lead on SSG. In case he is busy is there anyone else you recommend to thread a triangle barrel?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wild_Bill</div><div class="ubbcode-body">Hi the REm brakes are a joke and seriously dont even try to duplicate that abortion if you have cut as many off as we do and recrown the rifles so they shoot properly and actualy saw how little gas hits the baffles they are a gimmic.
contact SSG gunsmithing Nate makes a great brake and i am sure he would fit a brake for you but any of the hides gunsmiths should be able to do it for you.</div></div>
The Tactical Target thankfully does not have those stupid scallops that the VTR (or whatever it is) has. Mine is just a weird triangular barrel that I would like some threads cut on.
Thanks for the lead on SSG. In case he is busy is there anyone else you recommend to thread a triangle barrel?
Re: Triangle muzzle brake???
Try GAP im sure they would be able to do it or one of the other guys here making breaks they should be able to fit a break for you aswell. it is not much harder than doing a round barrel because you have to index both anyway.
Try GAP im sure they would be able to do it or one of the other guys here making breaks they should be able to fit a break for you aswell. it is not much harder than doing a round barrel because you have to index both anyway.
