Trigger pull gauge

[UIUCPPQ]

Can someone recommend me one of these? I'm not looking for anything top of the line, but I need a fairly accurate one and I'm not sure where to look or what sort of price I'm looking at.

 

[jasonk]

Re: Trigger pull gauge

Lyman works excellent.

http://www.amazon.com/Lyman-Electronic-Digital-Trigger-Gauge/dp/B00162QGLS

 

[roggom]

Re: Trigger pull gauge

I use the RCBS Premium, for field hunting and shooting, is good to go. http://www.midwayusa.com/product/545039/rcbs-trigger-pull-gage-premium-8-oz-to-8-lb-2-oz-increments

 

[RADcustom]

Re: Trigger pull gauge

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: roggom</div><div class="ubbcode-body">I use the RCBS Premium, for field hunting and shooting, is good to go. http://www.midwayusa.com/product/545039/rcbs-trigger-pull-gage-premium-8-oz-to-8-lb-2-oz-increments </div></div>

This is the one I use and recommend. I never have to worry about dead batteries and it is surprisingly accurate.

 

[RoosterShooter]

Re: Trigger pull gauge

I have several but would buy the Wheeler if I had it to do all over again. It's a simple mechanical scale, and is only around $20.

 

[AvsFan]

Re: Trigger pull gauge

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: UIUCPPQ</div><div class="ubbcode-body">Can someone recommend me one of these? I'm not looking for anything top of the line, but I need a fairly accurate one and I'm not sure where to look or what sort of price I'm looking at.

</div></div>

I was in the same boat a few months ago as, I wanted to measure & adjust accordingly some of my triggers. I purchased the Timney 8oz to 10lb gage and it works perfect.

Here

my $0.02

AvsFan

p.s. This one has a lot of positive reviews - I tend to base my purchase decision on reviews if I'm not familiar w/the product.

 

[REL1203]

Re: Trigger pull gauge

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">Lyman works excellent.

http://www.amazon.com/Lyman-Electronic-Digital-Trigger-Gauge/dp/B00162QGLS </div></div>

I just got this one, works well, tested 2.75 on my just modified R700 40x trigger, which is just what the Smith said it would be, so I think its pretty spot on.

 

[MartyM]

Re: Trigger pull gauge

+1 on the Lyman. Have had mine for four years and it's still on the first 9 volt. I just take the batt out after each use. One feature I like is that it will run an average of your trigger pulls.

 

[UIUCPPQ]

Re: Trigger pull gauge

I think I'm going to go with the Timney due to price and reviews. Thanks for the input everyone