Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
FYI setting actual zero stop is not tooless ala TT for the Trijicon. Setting the turret to zero is tooless. Not sure if it matters to youI would like to get my hands on one as well. I plan on putting it on a tl3 that has 3 barrels so I really am interested in the tooless turrets. I was reading some old threads and I realized that the ltec turrets wouldn't be too bad for a switch barrel due to the internal turret with numbers so you could document fairly easy.
FYI setting actual zero stop is not tooless ala TT for the Trijicon
I believe I saw your YouTube videos on this scope. Could you demonstrate how to zero the turrets and set the zero stop?FYI setting actual zero stop is not tooless ala TT for the Trijicon. Setting the turret to zero is tooless. Not sure if it matters to you
It can be helpful if you have a multi-cal setup. I had the Trijicon on and AI with 3 barrels for few months and it would've been nice to have tooless zero stop but yeah, it's not a must have. Takes 30 secs to set the zero stop on the Trijicona as long as you have a 1.5mm hex around. .How often do people change the location of the zero stop?
Follow this video since I cant do a better job than this guy. Only difference is that you don't need a tool/coin to unscrew the turrets on the Trijicon. Yo just unscrew the top part with your hand and the turret comes off. Setting up the zero stop is exactly the same as on the Bushnell in the video.I believe I saw your YouTube videos on this scope. Could you demonstrate how to zero the turrets and set the zero stop?
It can be helpful if you have a multi-cal setup. I had the Trijicon on and AI with 3 barrels for few months and it would've been nice to have tooless zero stop but yeah, it's not a must have. Takes 30 secs to set the zero stop on the Trijicona as long as you have a 1.5mm hex around. .
Follow this video since I cant do a better job than this guy. Only difference is that you don't need a tool/coin to unscrew the turrets on the Trijicon. Yo just unscrew the top part with your hand and the turret comes off. Setting up the zero stop is exactly the same as on the Bushnell in the video.
Yeah it's tough. I have no experience with XRS, and limited experience with Gen 2 Razor but it's very well liked. I've had the Trijicon right when they came out. I actually had it preordered. It's been a very good scope so far. Very nice glass (92.5% there with my ZP5Wow, I like it. I'm still torn lol. Razor, gen ii xrs or the trijicon.
So you're saying you can spare one to a less fortunate soul?I’m running 2 Trijicon’s 4.5-30 x 56 and both track excellent.... Very pleased.. View attachment 7231531View attachment 7231532
How dare you.Didnt expect to see so many trijicon supporters here.
The 1-8 is inferior to vortex 1-6 by a good bit.