Anyone got any views on good shooting tripods and tripod rifle rests that will work well with AICS and M40A3 rifles 308/300WM/338?
Tripods and tripod rifle rests?
- Thread starter Knight6
- Start date
Re: Tripods and tripod rifle rests?
Welcome to the Hide!!
Get this:
http://precisionriflesolutions.com/
Welcome to the Hide!!
Get this:
http://precisionriflesolutions.com/
Re: Tripods and tripod rifle rests?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PSYOPS</div><div class="ubbcode-body">Welcome to the Hide!!
Get this:
http://precisionriflesolutions.com/ </div></div>
+1 on the above!! I have been running Danel's tripods/cradles for a long time now and they are first rate all around (as is the man...and woman...behind the scenes). The Medium is arguably the most versatile in my experience. For your stated rifles, the SSP-1 cradle will work on all. Personally, I run the SSP-2 (wider) cradle as I often use it with other rifles that won't quite fit in the smaller one...better to have a little extra room in the cradle and not need it than to need it down the road and not have it!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PSYOPS</div><div class="ubbcode-body">Welcome to the Hide!!
Get this:
http://precisionriflesolutions.com/ </div></div>
+1 on the above!! I have been running Danel's tripods/cradles for a long time now and they are first rate all around (as is the man...and woman...behind the scenes). The Medium is arguably the most versatile in my experience. For your stated rifles, the SSP-1 cradle will work on all. Personally, I run the SSP-2 (wider) cradle as I often use it with other rifles that won't quite fit in the smaller one...better to have a little extra room in the cradle and not need it than to need it down the road and not have it!
Re: Tripods and tripod rifle rests?
Thanks for the welcome and info'. Love the Hide, have been on it all the time since I joined. Welcome all the advice. Thanks
Thanks for the welcome and info'. Love the Hide, have been on it all the time since I joined. Welcome all the advice. Thanks
Re: Tripods and tripod rifle rests?
PRS makes a great product and sharon is excellent to work with. the AICS works best with the narrow cradle.
PRS makes a great product and sharon is excellent to work with. the AICS works best with the narrow cradle.
Re: Tripods and tripod rifle rests?
If you have a tripod already and you are looking for a great tripod head then look at the HOG saddle they rock.
If you are looking for a full unit I havce two units I am not using that I have up for sale here at the below links.
http://www.snipershide.com/forum/ubbthre...729#Post3743729
http://www.snipershide.com/forum/ubbthre...727#Post3743727
If you have a tripod already and you are looking for a great tripod head then look at the HOG saddle they rock.
If you are looking for a full unit I havce two units I am not using that I have up for sale here at the below links.
http://www.snipershide.com/forum/ubbthre...729#Post3743729
http://www.snipershide.com/forum/ubbthre...727#Post3743727
Re: Tripods and tripod rifle rests?
Nomad, thanks for the offer but looking for something a little more basic.
Nomad, thanks for the offer but looking for something a little more basic.
Re: Tripods and tripod rifle rests?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Knight6</div><div class="ubbcode-body">Nomad, thanks for the offer but looking for something a little more basic. </div></div>
Make no mistake...the tripods and heads like Nomad has available are VERY nice pieces of kit, as are the Hog Saddles as also mentioned. I have used them all and they all have their particular ups/downs, as well as uses. It all comes down to your particular needs/wants and budget. If you want to keep it on the REALLY cheap, but still useful/effective, there are also some great DIY options if you have the time, inclination, and abilities to put them together.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Knight6</div><div class="ubbcode-body">Nomad, thanks for the offer but looking for something a little more basic. </div></div>
Make no mistake...the tripods and heads like Nomad has available are VERY nice pieces of kit, as are the Hog Saddles as also mentioned. I have used them all and they all have their particular ups/downs, as well as uses. It all comes down to your particular needs/wants and budget. If you want to keep it on the REALLY cheap, but still useful/effective, there are also some great DIY options if you have the time, inclination, and abilities to put them together.
Re: Tripods and tripod rifle rests?
ORD, can you point me to some of these if they appear on the Hide or elsewhere?
ORD, can you point me to some of these if they appear on the Hide or elsewhere?
Re: Tripods and tripod rifle rests?
I went both to PRS and Hog Saddle. Hog Saddle suggested Monfrotto tripods specifically either the 190 or 055 models. They suggested a magnesium ball head. However, the price for all this was just too much for me so I decided to go half way and get the PRS tripod with SSP2, some of the extras and also a Hog Saddle. Even this comes well over $500, using the suggested Monfrotto tripod would have put the cost at near $1K. Bit too much for me at this time. Hog Saddle indicated that the US!C like the Monfrotto 055 with mag ball. Thought others might be interested in the info I was sent from Hogs Saddle - below
Manfrotto is by far the most common tripod used by snipers and hunters. I don't have any experience with PSR.
Here are four great tripods to check out. I prefer the 055 models because they manage recoil better but the 190 models are lighter and cheaper.
Manfrotto 055XPROB Aluminum Tripod http://http://www.bhphotovideo.com/...o_055XPROB_055XPROB_Aluminum_Tripod_Legs.html
Manfrotto 055CXPRO3 Carbon Fiber Tripod http://www.bhphotovideo.com/c/product/58...rbon_Fiber.html
Manfrotto 190XPROB Aluminum Tripod http://www.bhphotovideo.com/c/product/47...num_Tripod.html
Manfrotto 190CXPRO3 Carbon Fiber Tripod http://http://www.bhphotovideo.com/...0CXPRO3_190CXPRO3_3_Section_Carbon_Fiber.html
Ball action heads are the most popular for snipers and the strongest in regards to carrying the loaded weight of the rifle. Here are three great options. (The 054 Magnesium ball Head is my favorite and what I personally use. It is also the favored head with the USMC West Coast Scout Sniper School.)
Manfrotto 054 Magnesium Ball Head http://www.bhphotovideo.com/c/product/754046-REG/Manfrotto_MH054M0_054_Magnesium_Ball_Head.html
Manfrotto 498 Midi Ball Head http://www.bhphotovideo.com/c/product/660296-REG/Manfrotto_498_498_Midi_Ball_Head.html
Manfrotto 496 Compact Ball Head http://www.bhphotovideo.com/c/product/660320-REG/Manfrotto_496_496_Compact_Ball_Head.html
Of all these options I think the 055XPROB tripod with 054 Magnesium Ball Head is an amazing shooting platform with the HOG Saddle. It will easily handle the recoil of 300WM, 338LM, and 50BMG. You can't go wrong with any of the above.
I went both to PRS and Hog Saddle. Hog Saddle suggested Monfrotto tripods specifically either the 190 or 055 models. They suggested a magnesium ball head. However, the price for all this was just too much for me so I decided to go half way and get the PRS tripod with SSP2, some of the extras and also a Hog Saddle. Even this comes well over $500, using the suggested Monfrotto tripod would have put the cost at near $1K. Bit too much for me at this time. Hog Saddle indicated that the US!C like the Monfrotto 055 with mag ball. Thought others might be interested in the info I was sent from Hogs Saddle - below
Manfrotto is by far the most common tripod used by snipers and hunters. I don't have any experience with PSR.
Here are four great tripods to check out. I prefer the 055 models because they manage recoil better but the 190 models are lighter and cheaper.
Manfrotto 055XPROB Aluminum Tripod http://http://www.bhphotovideo.com/...o_055XPROB_055XPROB_Aluminum_Tripod_Legs.html
Manfrotto 055CXPRO3 Carbon Fiber Tripod http://www.bhphotovideo.com/c/product/58...rbon_Fiber.html
Manfrotto 190XPROB Aluminum Tripod http://www.bhphotovideo.com/c/product/47...num_Tripod.html
Manfrotto 190CXPRO3 Carbon Fiber Tripod http://http://www.bhphotovideo.com/...0CXPRO3_190CXPRO3_3_Section_Carbon_Fiber.html
Ball action heads are the most popular for snipers and the strongest in regards to carrying the loaded weight of the rifle. Here are three great options. (The 054 Magnesium ball Head is my favorite and what I personally use. It is also the favored head with the USMC West Coast Scout Sniper School.)
Manfrotto 054 Magnesium Ball Head http://www.bhphotovideo.com/c/product/754046-REG/Manfrotto_MH054M0_054_Magnesium_Ball_Head.html
Manfrotto 498 Midi Ball Head http://www.bhphotovideo.com/c/product/660296-REG/Manfrotto_498_498_Midi_Ball_Head.html
Manfrotto 496 Compact Ball Head http://www.bhphotovideo.com/c/product/660320-REG/Manfrotto_496_496_Compact_Ball_Head.html
Of all these options I think the 055XPROB tripod with 054 Magnesium Ball Head is an amazing shooting platform with the HOG Saddle. It will easily handle the recoil of 300WM, 338LM, and 50BMG. You can't go wrong with any of the above.
Re: Tripods and tripod rifle rests?
get the vanguard GH100 ballhead with pistol grip if you're mounting the rifle. Very nice to mount spotting scopes to as well.
get the vanguard GH100 ballhead with pistol grip if you're mounting the rifle. Very nice to mount spotting scopes to as well.
Re: Tripods and tripod rifle rests?
There's a horse in a local pasture that has three legs, his name is tripod, don't know if you can shoot off him though, will inquire
There's a horse in a local pasture that has three legs, his name is tripod, don't know if you can shoot off him though, will inquire
Re: Tripods and tripod rifle rests?
The Hog Saddle is well worth the price!
Slap it on a Manfrotto 055PROB without the ball head. Works just fine!
You wont be disappointed.
The Hog Saddle is well worth the price!
Slap it on a Manfrotto 055PROB without the ball head. Works just fine!
You wont be disappointed.
Re: Tripods and tripod rifle rests?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Knight6</div><div class="ubbcode-body"> Even this comes well over $500, using the suggested Monfrotto tripod would have put the cost at near $1K. </div></div>
Math Fail... Looked around for some current tripod prices.
A Manfrotto 055XPROB Tripod, 054 Mag Ball Head, and HOG Saddle will put you in the $500-ish range. (QR plate and carbon fiber options will add cost)
Ditch the ball head and save a hundred bucks and change.
Now days a quality piece of kit is rarely cheap, but nowhere near $1K.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Knight6</div><div class="ubbcode-body"> Even this comes well over $500, using the suggested Monfrotto tripod would have put the cost at near $1K. </div></div>
Math Fail... Looked around for some current tripod prices.
A Manfrotto 055XPROB Tripod, 054 Mag Ball Head, and HOG Saddle will put you in the $500-ish range. (QR plate and carbon fiber options will add cost)
Ditch the ball head and save a hundred bucks and change.
Now days a quality piece of kit is rarely cheap, but nowhere near $1K.
Re: Tripods and tripod rifle rests?
I have the PRS large set up with the SSP-1 that I use with my AX chassis and couldn't be happier. You can rest your bino's or spotting scope in it and it's really quite stable.
I've been very happy with this set up.
I have the PRS large set up with the SSP-1 that I use with my AX chassis and couldn't be happier. You can rest your bino's or spotting scope in it and it's really quite stable.
I've been very happy with this set up.
Re: Tripods and tripod rifle rests?
I like my PRS as it is a nice light weight tripod. However I recently learned how stable you can be whenb utilizing a heavy duty tripod (Manfrotto). Manfrotto will be my next purchase.
I like my PRS as it is a nice light weight tripod. However I recently learned how stable you can be whenb utilizing a heavy duty tripod (Manfrotto). Manfrotto will be my next purchase.
Re: Tripods and tripod rifle rests?
I have the triclawps (similar to the Hog Saddle) on top of a Velbon Sherpa 600R tripod. I love the combo, it's relatively inexpensive and works. You can use this tripod way down low in prone position all the way to standing.
In sitting and standing I use a stoney point bipod to stabilize the rifle's rear which really helps a lot.
I have the triclawps (similar to the Hog Saddle) on top of a Velbon Sherpa 600R tripod. I love the combo, it's relatively inexpensive and works. You can use this tripod way down low in prone position all the way to standing.
In sitting and standing I use a stoney point bipod to stabilize the rifle's rear which really helps a lot.
Re: Tripods and tripod rifle rests?
Appreciate all the input guys! Thanks for the market place check AMTeam4 and the math check! I will check out all your suggestions. Great to be on such a helpful forum!!
Appreciate all the input guys! Thanks for the market place check AMTeam4 and the math check! I will check out all your suggestions. Great to be on such a helpful forum!!
