Hey Guys & Gals,
I just finished up a rifle that I will have a demo day for the Bushnell Brawl at Rifles Only this week. If you are going to be there be sure to come out and shoot it!
Here are the specs!!!
-Defiance action, AI mag cut, 30 MOA double pinned rail, double pinned recoil lug, M16 extractor, blind side bolt release, heavy rear tang, one piece bolt, bolt lugs are coated in NIC Microslick, Badger tactical bolt knob with TTF shield engraved.
-We used a jewel trigger with this setup.
-Bartlein Straight Taper, 1-11.25" 21" finish, 5R rifling. Cryogenically treated (not by liquid nitrogen flash cooling, by slow, dry cooling with propritary thermal cycling). Thread protector is finished with a seamless fit to the barrel.
-McMillan A3-5 adj, spacer system, sniper fill, Badger EFR, custom texturing, Anschutz rail, and Cerakoted Coyote tan and Patriot Brown. Surgeon DBM with AI Mag. We bed in our DBM with Devcon to ensure that it strengthens this area of the stock. After inletting and removing that much of the stock, we've seen small accuracy issues and have gained that back bedding.
-Chambered with a custom match PTG, the bore is timed to 12 o'clock position.
-Devcon bedding for the action and recoil lug, and we cleaned up the barrel channel after having to make room for the larger barrel with Marine-Tex to provide a .030" clearance around the barrel.
-All metal was finished in Patriot Brown with Sniper Grey accents.
-The scope is a Premier.
-Rings are Tally Tactical 6 screw rings Rings.
Thanks for looking.
Let us know if you need anything, our lead times are shorter than most at the moment.
Curtis
Templar Tactical Firearms
www.templartacticalfirearms.com
3 Shot group (3 shot = rifle, 5 shot = shooter....I will not get into shot group bantering
![url]](http://[url="http://i1243.photobucket.com/albums/gg548/cap2031/Templar%20Tactical%20Firearms/MOA.jpg"]http://i1243.photobucket.com/albums/gg548/cap2031/Templar%20Tactical%20Firearms/MOA.jpg[/url])
I just finished up a rifle that I will have a demo day for the Bushnell Brawl at Rifles Only this week. If you are going to be there be sure to come out and shoot it!
Here are the specs!!!
-Defiance action, AI mag cut, 30 MOA double pinned rail, double pinned recoil lug, M16 extractor, blind side bolt release, heavy rear tang, one piece bolt, bolt lugs are coated in NIC Microslick, Badger tactical bolt knob with TTF shield engraved.
-We used a jewel trigger with this setup.
-Bartlein Straight Taper, 1-11.25" 21" finish, 5R rifling. Cryogenically treated (not by liquid nitrogen flash cooling, by slow, dry cooling with propritary thermal cycling). Thread protector is finished with a seamless fit to the barrel.
-McMillan A3-5 adj, spacer system, sniper fill, Badger EFR, custom texturing, Anschutz rail, and Cerakoted Coyote tan and Patriot Brown. Surgeon DBM with AI Mag. We bed in our DBM with Devcon to ensure that it strengthens this area of the stock. After inletting and removing that much of the stock, we've seen small accuracy issues and have gained that back bedding.
-Chambered with a custom match PTG, the bore is timed to 12 o'clock position.
-Devcon bedding for the action and recoil lug, and we cleaned up the barrel channel after having to make room for the larger barrel with Marine-Tex to provide a .030" clearance around the barrel.
-All metal was finished in Patriot Brown with Sniper Grey accents.
-The scope is a Premier.
-Rings are Tally Tactical 6 screw rings Rings.
Thanks for looking.
Let us know if you need anything, our lead times are shorter than most at the moment.
Curtis
Templar Tactical Firearms
www.templartacticalfirearms.com
3 Shot group (3 shot = rifle, 5 shot = shooter....I will not get into shot group bantering
