Underground Skunkworks CQB Breacher

[BlackOps Tech]

This is the Skunkworks CQB Breacher with the re-vamped Breaching Device. The specs are:

Remington 870--Full Action Smoothing/Trigger Work
Remington 870 Barrel--Lengthened Forcing Cone/Honed/Modified For RemChokes, 13.5"
Underground Skunkworks Sight System
Underground Skunkworks Full Length Rail
Underground Skunkworks One Shot Extension
Underground Skunkworks Sling Loop
Underground Skunkworks Big Button Safety
Underground Skunkworks Hi-Viz Follower
Underground Skunkworks Breaching Standoff
Underground Skunkworks/Hogue 12" LOP Stock
Mesa Tactical SideSaddle
Surefire Forend
Birdsong Green T with Black T Accents

This shotgun will place 8 Pellets from Hornady TAP Blue Hull 00 Buck into less than 4" at 25 yards. However, its primary purpose is to breach deadbolts, door knobs and hinges and then be used as an entry shotgun afterwards....

 

[Lowlight]

Re: Underground Skunkworks CQB Breacher

That is pretty bad ass, and I'm not a shotgun guy...

 

[uscbigdawg]

Re: Underground Skunkworks CQB Breacher

It's always nice to have the little "attitude adjuster" on the end.

Pretty sweet design. My offer still stands for any assistance y'all need/want.

Rich

 

[JRose]

Re: Underground Skunkworks CQB Breacher

Isn't accurizing a shotty so that it shoots tight groups kinda defeating the purpose?

 

[Blaster4]

Re: Underground Skunkworks CQB Breacher

Agreed...that is a well executed weapon system...

...would rather see it in all Black though.

Respectfully,

--KJ

 

[SFC Carpentier jr]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">That is pretty bad ass, and I'm not a shotgun guy...
</div></div>

I use a shotgun every once in a while. Have breached a few doors with them and that shotgun would make a good one. Well done.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JRose</div><div class="ubbcode-body">Isn't accurizing a shotty so that it shoots tight groups kinda defeating the purpose?

</div></div>

Highly valid question....Depends on the application, which is exactly why there's a choice of different chokes....I've actually hit "go" targets at 25 yards in the head, with a no shoot in front of it with the shotgun in the pics using a Full choke (problem is, repeatability will change with ammo age). Change the choke to change the level of precision and to increase vital organ trauma with more holes in the target. That said, I typically keep an Improved choke in my SBS to open things up a little and my wife has a Cylinder choke for her SBS.

 

[Switchblade]

Re: Underground Skunkworks CQB Breacher

ME Likee! Now about that big thorny breaching tool for a Benelli S90MkI, ever gonna happen? Retro fit Optics base in front of the GR rear sights? Just doing some thinking for when I am done doing all the unholy house work around this money pit

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Switchblade</div><div class="ubbcode-body">ME Likee! Now about that big thorny breaching tool for a Benelli S90MkI, ever gonna happen? Retro fit Optics base in front of the GR rear sights? Just doing some thinking for when I am done doing all the unholy house work around this money pit </div></div>

As a matter of fact, I have the Benelli Breaching Device in stock....I did quite a few for a PD in CA. I can do pretty much anything to the Benelli that I can do to the Remington, with the exception of shortenting the barrels on the semis....It kinda screws up the gas system....

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">That is pretty bad ass, and I'm not a shotgun guy... </div></div>

Thanks Frank....

 

[Mr blasty]

Re: Underground Skunkworks CQB Breacher

Thats probably the only good looking breaching device I've seen.
That looks like a grizzly custom mag tube extension.

http://www.grizzlycustom.com/photo_pages/870_parts/2_shot_ext_1.html

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KJDrake</div><div class="ubbcode-body">Agreed...that is a well executed weapon system...

...would rather see it in all Black though.

Respectfully,

--KJ </div></div>


<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SFC Carpentier jr</div><div class="ubbcode-body"> <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">That is pretty bad ass, and I'm not a shotgun guy...
</div></div>

I use a shotgun every once in a while. Have breached a few doors with them and that shotgun would make a good one. Well done. </div></div>

Thanks Guys....I just did a few black ones with 4 position telecoping butts on them with 12" barrels....I don't think I'll ever carry an 18" shotgun again, seems like it's a mile long....

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mr blasty</div><div class="ubbcode-body">Thats probably the only good looking breaching device I've seen.
That looks like a grizzly custom mag tube extension.

http://www.grizzlycustom.com/photo_pages/870_parts/2_shot_ext_1.html </div></div>

Thanks Blasty....

That's actually a Skunkworks Mag Tube Extension. Grizzly Custom is my sister company (we're in the same building) and I make them for Lew.

 

[Blaster4]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body">

Thanks Guys....I just did a few black ones with 4 position telecoping butts on them with 12" barrels....I don't think I'll ever carry an 18" shotgun again, seems like it's a mile long.... </div></div>

pics please...

 

[greentimber]

Re: Underground Skunkworks CQB Breacher

Oh snap. That is sexy.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KJDrake</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body">

Thanks Guys....I just did a few black ones with 4 position telecoping butts on them with 12" barrels....I don't think I'll ever carry an 18" shotgun again, seems like it's a mile long.... </div></div>

pics please... </div></div>

No problem....I'll try to get one of them in the photo room tomorrow and snap a few pics....

 

[Mr blasty]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mr blasty</div><div class="ubbcode-body">Thats probably the only good looking breaching device I've seen.
That looks like a grizzly custom mag tube extension.

http://www.grizzlycustom.com/photo_pages/870_parts/2_shot_ext_1.html </div></div>

Thanks Blasty....

That's actually a Skunkworks Mag Tube Extension. Grizzly Custom is my sister company (we're in the same building) and I make them for Lew. </div></div>

OK. So how much smoother will an 870 police magnum be if I send it to you to have the action smoothed out? Does the breaching device have to be removed to change chokes? How do your barrels do with slugs? This is almost exactly what I want:

http://www.flickr.com/photos/impulselabs/3897723438/in/photostream/

The only things I want to change are the stock to a Vltor Emod, Mesa Tactical shot tube extension, different BUIS based on an 870 police mag with your mag tube extension.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mr blasty</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mr blasty</div><div class="ubbcode-body">Thats probably the only good looking breaching device I've seen.
That looks like a grizzly custom mag tube extension.

http://www.grizzlycustom.com/photo_pages/870_parts/2_shot_ext_1.html </div></div>

Thanks Blasty....

That's actually a Skunkworks Mag Tube Extension. Grizzly Custom is my sister company (we're in the same building) and I make them for Lew. </div></div>

OK. So how much smoother will an 870 police magnum be if I send it to you to have the action smoothed out? Does the breaching device have to be removed to change chokes? How do your barrels do with slugs? This is almost exactly what I want:

http://www.flickr.com/photos/impulselabs/3897723438/in/photostream/

The only things I want to change are the stock to a Vltor Emod, Mesa Tactical shot tube extension, different BUIS based on an 870 police mag with your mag tube extension. </div></div>

There's a significant difference in how smooth the gun will function after it's worked over.

The breaching device on this system has to be removed to change chokes. I have another design that allows the choke to be removed while the BD is still in place, but you have to keep the special made wrench nearby when you want to change chokes.

The barrels are scary accurate with slugs at 100+ yards and I can do any combination of mods/improvements to the 870, 1100, 1187 and the Benelli's....

 

[Chiller]

Re: Underground Skunkworks CQB Breacher

dont want to be on the sharp end of that....

very well done....

 

[300sniper]

Re: Underground Skunkworks CQB Breacher

i'm not a shotgun guy either but that looks like it will serve it's purpose great.

it's looking like you are keeping the firearms industry well covered mike. keep up the great work.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">dont want to be on the sharp end of that....

very well done.... </div></div>

Thanks Chiller....I have the same configuration of breaching device that screws onto the mag tube and I stabbed one into a metal door frame. Sternum checks would be very interesting....

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body">i'm not a shotgun guy either but that looks like it will serve it's purpose great.

it's looking like you are keeping the firearms industry well covered mike. keep up the great work. </div></div>

Thanks 300, I see you've been a bit of a mad scientist lately as well....Good stuff....

 

[Mr blasty]

Re: Underground Skunkworks CQB Breacher

Well it looks like I've found who's doing my 870 when I get one!

 

[High Binder]

Re: Underground Skunkworks CQB Breacher

I looked on your site but couldn't find the breach bit for sale. Any chance I can order one? I was going to buy the bulky one to bring one of my barrels to a specific length but yours looks a lot lighter. What's the thread pattern?

 

[LoneWolfUSMC]

Re: Underground Skunkworks CQB Breacher

Very nice.

I was not happy about returning my issued 14" 870. Although I know our breachers will put it to better use than a Sniper.

Hopefully Indiana will appeal the SBS prohibitions soon and I can register my personal as an SBS.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Shot In The Dark</div><div class="ubbcode-body">I looked on your site but couldn't find the breach bit for sale. Any chance I can order one? I was going to buy the bulky one to bring one of my barrels to a specific length but yours looks a lot lighter. What's the thread pattern? </div></div>

I've neglected my site a little lately and have a lot of new content to add. Give me a call and I'll hook you up.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LoneWolfUSMC</div><div class="ubbcode-body">Very nice.

I was not happy about returning my issued 14" 870. Although I know our breachers will put it to better use than a Sniper.

Hopefully Indiana will appeal the SBS prohibitions soon and I can register my personal as an SBS. </div></div>

Thanks and I understand. I've become a firm believer in the SBS as a versatile utility firearm.

 

[High Binder]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Shot In The Dark</div><div class="ubbcode-body">I looked on your site but couldn't find the breach bit for sale. Any chance I can order one? I was going to buy the bulky one to bring one of my barrels to a specific length but yours looks a lot lighter. What's the thread pattern? </div></div>

I've neglected my site a little lately and have a lot of new content to add. Give me a call and I'll hook you up. </div></div>

Sweet, will do thanks!

 

[Quickoz]

Re: Underground Skunkworks CQB Breacher

Now that is one nice shotty. Damn. I want one. All black would just make it look deadly.

 

[JRose]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LoneWolfUSMC</div><div class="ubbcode-body">

Hopefully Indiana will appeal the SBS prohibitions soon and I can register my personal as an SBS. </div></div>


Alabama just did it... Keep pushing for it!

 

[Outsydlooknin75]

Re: Underground Skunkworks CQB Breacher

How about a straight up barrel ream and thread for chokes on a Mossberg 930 ...... Ive alredy cut the barrel back, but I would like for it to be threaded so I can change chokes for 3gun.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body">How about a straight up barrel ream and thread for chokes on a Mossberg 930 ...... Ive alredy cut the barrel back, but I would like for it to be threaded so I can change chokes for 3gun. </div></div>

You want to run RemChokes?

 

[Harris51]

Re: Underground Skunkworks CQB Breacher

So how well do clayvons shoot through the choke?

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Harris51</div><div class="ubbcode-body">So how well do clayvons shoot through the choke? </div></div>

Very well, but I don't shoot them through a Full choke....The Improved is basically what I keep in mine unless I'm doing long shot demos....

 

[Andrew Blubaugh]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KJDrake</div><div class="ubbcode-body">Agreed...that is a well executed weapon system...

...would rather see it in all Black though.

Respectfully,

--KJ</div></div>

Drake, Are you kidding me? All black? Dude, this is 2010 not April 30, 1980. Get with the times!

 

[Outsydlooknin75]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body">How about a straight up barrel ream and thread for chokes on a Mossberg 930 ...... Ive alredy cut the barrel back, but I would like for it to be threaded so I can change chokes for 3gun. </div></div>

You want to run RemChokes? </div></div>

Would prefer Benelli, since more guys run them and I could borrow ... but really it doesnt matter, Ive got to buy chokes for it anyhow. I dont plan on geting rid of this gun for a while so it really doesnt matter. Im cheap.

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Outsydlooknin75</div><div class="ubbcode-body">How about a straight up barrel ream and thread for chokes on a Mossberg 930 ...... Ive alredy cut the barrel back, but I would like for it to be threaded so I can change chokes for 3gun. </div></div>

You want to run RemChokes? </div></div>

Would prefer Benelli, since more guys run them and I could borrow ... but really it doesnt matter, Ive got to buy chokes for it anyhow. I dont plan on geting rid of this gun for a while so it really doesnt matter. Im cheap. </div></div>

I can ream/thread for RemChokes for $75, but the Benelli mod will be quite a bit more....

 

[Outsydlooknin75]

Re: Underground Skunkworks CQB Breacher

Reamers arent cheap. I looked into buying the Mossberg reamer and then having a buddy do it ...... reamer was like 135 plus.

 

[Dagsta]

Re: Underground Skunkworks CQB Breacher

Mike, what kind of results are you getting w slugs w the 13.5 bbl and your chokes?

When you have time would you PM me some pricing information on this model.

Thanks
Don

 

[Blaster4]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cowboy_bravo</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KJDrake</div><div class="ubbcode-body">Agreed...that is a well executed weapon system...

...would rather see it in all Black though.

Respectfully,

--KJ</div></div>

Drake, Are you kidding me? All black? Dude, this is 2010 not April 30, 1980. Get with the times!</div></div>

Dude...you need to catch up with the times...Black is the new Coyote Brown...which was the new Olive Drab...which was the new Black...see how that works...LOL.

Black...keeping it Old School...hahahahaha

--KJ

 

[SRT_Supply]

Re: Underground Skunkworks CQB Breacher

I hate shotguns...but that's a pure piece of artwork. Awesome!

 

[RGraff]

Re: Underground Skunkworks CQB Breacher

Just another tool in the box.

Very nicely done Skunkworks.

 

[BOLTRIPPER]

Re: Underground Skunkworks CQB Breacher

that thing needs to be field tested.......dove season opens here Sept 1.......send it to ME,,,,, Boltripper & i'll do an AAR and send along some pics of breakfast.

regards

 

[bm11]

Re: Underground Skunkworks CQB Breacher

I like!

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dagsta</div><div class="ubbcode-body">Mike, what kind of results are you getting w slugs w the 13.5 bbl and your chokes?

When you have time would you PM me some pricing information on this model.

Thanks
Don </div></div>

Typically less than 2 1/2" at 100 with an Improved choke....PM inbound....

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SRT Supply</div><div class="ubbcode-body">I hate shotguns...but that's a pure piece of artwork. Awesome! </div></div>


<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RGraff</div><div class="ubbcode-body">Just another tool in the box.

Very nicely done Skunkworks. </div></div>

Thanks guys....

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BOLTRIPPER</div><div class="ubbcode-body">that thing needs to be field tested.......dove season opens here Sept 1.......send it to ME,,,,, Boltripper & i'll do an AAR and send along some pics of breakfast.

regards </div></div>

I think you'll like how it swings....

 

[MtGoat]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Switchblade</div><div class="ubbcode-body">ME Likee! Now about that big thorny breaching tool for a Benelli S90MkI, ever gonna happen? Retro fit Optics base in front of the GR rear sights? Just doing some thinking for when I am done doing all the unholy house work around this money pit </div></div>

As a matter of fact, I have the Benelli Breaching Device in stock....I did quite a few for a PD in CA. I can do pretty much anything to the Benelli that I can do to the Remington, with the exception of shortenting the barrels on the semis....It kinda screws up the gas system.... </div></div>

Does the Benelli M1-S90 have to be modified or does it thread right into the choke threads? Do you have any photos and info on installation and costing?

Thanks
Pat

 

[BlackOps Tech]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MtGoat</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Switchblade</div><div class="ubbcode-body">ME Likee! Now about that big thorny breaching tool for a Benelli S90MkI, ever gonna happen? Retro fit Optics base in front of the GR rear sights? Just doing some thinking for when I am done doing all the unholy house work around this money pit </div></div>

As a matter of fact, I have the Benelli Breaching Device in stock....I did quite a few for a PD in CA. I can do pretty much anything to the Benelli that I can do to the Remington, with the exception of shortenting the barrels on the semis....It kinda screws up the gas system.... </div></div>

It'll work as is....

Does the Benelli M1-S90 have to be modified or does it thread right into the choke threads? Do you have any photos and info on installation and costing?

Thanks
Pat </div></div>

 

[MtGoat]

Re: Underground Skunkworks CQB Breacher

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MtGoat</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Switchblade</div><div class="ubbcode-body">ME Likee! Now about that big thorny breaching tool for a Benelli S90MkI, ever gonna happen? Retro fit Optics base in front of the GR rear sights? Just doing some thinking for when I am done doing all the unholy house work around this money pit </div></div>

As a matter of fact, I have the Benelli Breaching Device in stock....I did quite a few for a PD in CA. I can do pretty much anything to the Benelli that I can do to the Remington, with the exception of shortenting the barrels on the semis....It kinda screws up the gas system.... </div></div>

It'll work as is....

Does the Benelli M1-S90 have to be modified or does it thread right into the choke threads? Do you have any photos and info on installation and costing?

Thanks
Pat </div></div> </div></div>


Will it fit on either a threaded barrel (threaded for choke tubes) and a straight cylinder bore shotgun (no threading)? What is the cost and is it user installation or does one have to send the barrel in?

Pat