A couple of years ago I built a MK12 Mod 1 SPR Type Rifle using the following parts:
RRA Lower with all Colt small parts including an A2/A4 Rifle Stock
Geissele SSA-E Trigger
LaRue "Stealth" Complete Upper that LaRue built with an 18" Lothar Walther Barrel, 1 in 8 twist, Wylde Chambered.
The Optic i have been using was a Leupold MK4 3-9 SPR Scope
I have been very happy with this rifle to say the least, However one night I was staying in a motel while on the road for work when some "pillars of our community" decided to gather outside my hotel room. That night I had my SPR with me so as a precaution I decided if I had to address these guys I would rather do it with a rifle then with the SiG P226 I CCW. This is when reality struck me… I removed the bipod from the rifle, seated a 30 rd mag loaded with M193, and dialed the glass down to its lowest setting- 3X…
I instantly knew this was no bueno! I didn't want to get into a gun fight in a hotel room with a 3X scope on my rifle! So I removed the scope (Thank you Mark LaRue), deployed my Troy sights, Mounted my SureFire M600 and called it good…
No one needed to be ventilated that night but I thought it was BS that I had to remove an optic from an AR-15 to use it as a QCB weapon!
I have found the solution- The US Optics SR-8C!
I now have this optic on my SPR and it is a true 1x with a Red Dot that can be used all the way to the highest setting (8X). The dot is as good as an Aimpoint which to me Aimpoint is the standard to judge a dot from. It has a Mil Based Reticle so I can range for distance as well. Now My SPR is what I always wanted it to be- An AR-15 type rifle that can be used for everything from CQB to long range precision shooting all with one optic!
Thank you US Optics!
RRA Lower with all Colt small parts including an A2/A4 Rifle Stock
Geissele SSA-E Trigger
LaRue "Stealth" Complete Upper that LaRue built with an 18" Lothar Walther Barrel, 1 in 8 twist, Wylde Chambered.
The Optic i have been using was a Leupold MK4 3-9 SPR Scope
I have been very happy with this rifle to say the least, However one night I was staying in a motel while on the road for work when some "pillars of our community" decided to gather outside my hotel room. That night I had my SPR with me so as a precaution I decided if I had to address these guys I would rather do it with a rifle then with the SiG P226 I CCW. This is when reality struck me… I removed the bipod from the rifle, seated a 30 rd mag loaded with M193, and dialed the glass down to its lowest setting- 3X…
I instantly knew this was no bueno! I didn't want to get into a gun fight in a hotel room with a 3X scope on my rifle! So I removed the scope (Thank you Mark LaRue), deployed my Troy sights, Mounted my SureFire M600 and called it good…
No one needed to be ventilated that night but I thought it was BS that I had to remove an optic from an AR-15 to use it as a QCB weapon!
I have found the solution- The US Optics SR-8C!
I now have this optic on my SPR and it is a true 1x with a Red Dot that can be used all the way to the highest setting (8X). The dot is as good as an Aimpoint which to me Aimpoint is the standard to judge a dot from. It has a Mil Based Reticle so I can range for distance as well. Now My SPR is what I always wanted it to be- An AR-15 type rifle that can be used for everything from CQB to long range precision shooting all with one optic!
Thank you US Optics!
Last edited: