Got a brand new pair of Vector X 12x42s smrs and when trying to update the firmware the update failed and now the rangefinders wont even power on. Trying to get ahold of Vectronix but the 7hr delay is hard to work with. Anyone else seen this problem?
Vector X problems
- Thread starter grisantib
- Start date
Looking to possibly purchase a pair of these “Vectronix VECTOR X 10x42” binoculars. Was your problem resolved, and if so, how do you like using them?
I had a warranty question and I went to Eurooptic. Didn’t like their answer but at least I could get through to them.
Vectronix did finally tell me how to basically reboot the binos and it worked. SInce then i have had almost zero issues with the binos and love them. Glass is very good and form what i can tell my laser is almost dead nuts zeroed on my reticle.
Here is how to reboot a pair binos if ever needed:
Please do the following:
1) remove battery, wait ten seconds, App opened and ready for searching of devices (you probably won't be able to see a device at that time.
2) re-insert battery
3) press and hold the D-Pad Center button
4) press the laser button
5) release laser button, followed by the release of the center button of the D-PAD
6) a new device can now be found by the app most probably it advertises itself as AB-VECSS....
7) the app will recognise the device and restart the firmware update.
But as mentioned this just a backup plan.
Similar threads
