Re: Vectronix PLRF10 or 15
These are just specs, and everything is all shooters preference :
Technical Data PLRF10
Optics Data interface
Observation monocular Standard interface type RS232
Magnification Field of view Objective diameter Focus
Reticle
Eye relief Dioptric setting 1064 nm laser protection
Rangefinder (distance)
6x 106 mil / 6° 27 mm fixed red LED square, activated by key and glass reticle with 5 mil graduation 21 mm > +2 to -4 diopters attenuation factor O.D. > 4
Power supply
Standard, on-board 2x 3V lithium battery type CR123A
Battery capacity (20°C) > 10000 measurements, low battery indicator
Environmental conditions, tested to MIL-STD-810
Laser type 905 nm, class 1 eye-safe per IEC 60825-1 Ed 1.2
Waterproof optional
Operational temperature Storage temperature
Shock Vibration
Physical
1 m, 30 minutes 10 m, 30 minutes -35°C to +63°C -31°F to +145°F -40°C to +85°C -40°F to +185°F 40 g / 11 ms / xyz 10 to 500 Hz in 10 minutes
Range capability Specified performance
Accuracy (1σ

False alarm rate Resolution on display Multiple targets Time per measurement Repetition rate Beam divergence, typical
Display
(2001-08), ANSI Z 136.1 (2000) 5 m to 2500 m 1800 m at visibility 15 km, 2.3 x 2.3m target, albedo 0.4 detection probability 90%
± 2 m < 2% 1 m / 1 yd / 1 ft up to 3 targets in line of sight 0.4 s 12 per minute 0.3 x 1.5 mil
Housing aluminium anodized in removable shock absorbing
Type light emitting diodes (LED) with automatic brightness
Colour Tripod interface Dimensions with rubber armoring
length width height
Weight with rubber armoring and batteries
rubber armoring black standard 1⁄4 inch thread
125 mm / 5.0 in 101 mm / 4.0 in 50 mm / 2.0 in < 620 g / 1.4 lbs
Vectronix AG Max-Schmidheiny-Strasse 202 CH-9435 Heerbrugg Switzerland Telephone +41 71 726 72 00 Fax +41 71 726 72 01
www.vectronix.ch
Data displayed Unit settings
control and dimming for image intensifiers slope distance and other functions according to the user manual
meter, yard, feet
And the PLRF15 is :
Technical Data PLRF15
Optics Data interface
Observation monocular Standard interface type RS232
Magnification Field of view Objective diameter Focus
Reticle
Eye relief Dioptric setting 1064 nm laser protection
Rangefinder (distance)
6x 106 mil / 6° 27 mm fixed red LED square, activated by key and glass reticle with 5 mil graduation 21 mm > +2 to -4 diopters attenuation factor O.D. > 4
Power supply
Standard, on-board 2x 3V lithium battery type CR123A
Battery capacity (20°C) > 10000 measurements, low battery indicator
Environmental conditions, tested to MIL-STD-810
Laser type 1550 nm, class 1 eye-safe per IEC 60825-1 Ed 1.2
Waterproof optional
Operational temperature Storage temperature
Shock Vibration
Physical
1 m, 30 minutes 10 m, 30 minutes -35°C to +63°C -31°F to +145°F -40°C to +85°C -40°F to +185°F 40 g / 11 ms / xyz 10 to 500 Hz in 10 minutes
Range capability Specified performance
Accuracy (1σ

False alarm rate Resolution on display Multiple targets Time per measurement Repetition rate
Beam divergencem, typical
Display
(2001-08), ANSI Z 136.1 (2000) 5 m to 3000 m 2500 m at visibility 15 km, 2.3 x 2.3m target, albedo 0.4 detection probability 90%
± 2 m (50 m to 1500 m) ± 5 m (< 50 m / > 1500 m) < 2% 1 m / 1 yd / 1 ft up to 3 targets in line of sight 0.9 s 12 per minute 0.5 x 2.0 mil
Housing aluminium anodized in removable shock absorbing
Type light emitting diodes (LED) with automatic brightness
Colour Tripod interface Dimensions with rubber armoring
length width height
Weight with rubber armoring and batteries
rubber armoring black standard 1⁄4 inch thread
125 mm / 5.0 in 101 mm / 4.0 in 50 mm / 2.0 in < 620 g / 1.4 lbs
Vectronix AG Max-Schmidheiny-Strasse 202 CH-9435 Heerbrugg Switzerland Telephone +41 71 726 72 00 Fax +41 71 726 72 01
www.vectronix.ch
Data displayed Unit settings
control and dimming for image intensifiers slope distance and other functions according to the user manual
meter, yard, feet