Video How To: Reloading 223 & 308

[Guest]

Elfster4321 [IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/media.scout.com\/media\/avatars\/4\/5\/Elfster4321.gif"}[/IMG2]


XFirst Sergeant
Rating: 2.9/5 this site
1332 posts this site
reloading 223 & 308 with 6x5 live fire last episode
Tuesday at 7:23 AM

---

I understand everyone has their own method to their madness and this is just what I do...... and I might be a little bias to this all LOL! But if you're new I really don't think you'll find a better playlist on how to reload for a semi auto.... or even bolt action if you full length resize:



reloading start to finish

 

[elfster1234]

New addition 6/30/19, the LIVE STREAM RELOADING EVENT where your regular joe starting out reloading is asking questions as we go! Might be long as it’s LIVE, but many questions from new reloaders are answered on the way! Check it out here!

(TEST RUN) LIVE STREAM, RELOADING PART1: SORTING, DECAPPING, WASH


LIVE STREAM, RELOADING PART2: SWAGE, REAMER, UNIFORMING


LIVE STREAM, RELOADING PART3: ANNEALING WITH ANNEALEEZ


LIVE STREAM, RELOADING PART4: HEADSPACE OVERVIEW, LUBE, SIZE, & 2ND / FINAL WASH


LIVE STREAM, RELOADING PART5: TRIM, DEBUR, CHAMFER, SEAT PRIMERS


LIVE STREAM, RELOADING PART6: DROP POWDER, SEAT BULLET, DONE!

 

[elfster1234]

How to make an annealer for about $100! Parts list in the description box of this video on my YouTube page!

 

[elfster1234]

another video of how i anneal my brass with the very DIY annealer listed above FYI... hope this helps! send me any PM's with questions and ill try my level best to answer them ASAP! here is the direct link to the video on youtube if you like: https://www.youtube.com/watch?v=3d_8vDFLP9c

 

[jlsustala]

awsome videos great tips thanks boss

 

[elfster1234]

Here is my playlist link of me using the ANNEALEEZ annealing machine which is currently being sold for $275 as of 6-29-19:

ANNEALEEZ GEN2

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

www.youtube.com

 

[jrji]

Great videos!

 

[elfster1234]

Great videos!

thanks!

 

[want2learn]

thank you

 

[elfster1234]

thank you

No problem! Glad to help!

 

[alexramsey]

very helpful! thank you

 

[elfster1234]

very helpful! thank you

You betcha!

 

[PAYDIRT]

Awesome Videos

 

[elfster1234]

Thanks!

Awesome Videos

 

[MMH]

Very Helpful!!! I have been reloading for a while and this is fantastic.

 

[elfster1234]

Thank you! It’s greatly appreciated and I’m happy to help!

Very Helpful!!! I have been reloading for a while and this is fantastic.

 

[Don Briere]

Thank-you for a well done series on reloading. They are very useful to refresh this 75 year old brain review procedures.

BR

 

[elfster1234]

Thank-you for a well done series on reloading. They are very useful to refresh this 75 year old brain review procedures.

BR

no problem at all! glad to make the vids! and hopefully make more of them!

 

[HPIguy]

As someone who is very slowly getting into reloading, I really appreciate you taking the time to make these videos.

 

[elfster1234]

As someone who is very slowly getting into reloading, I really appreciate you taking the time to make these videos.

Ohhh no problem at all! Makes me happy to spread the knowledge!

 

[H-D]

Very helpful...thanks for all the time you put into this!

 

[elfster1234]

you betcha! glad to help!

Very helpful...thanks for all the time you put into this!

 

[elfster1234]

here is a quick little "taste" of what it takes to reload in 3 minutes!

 

[elfster1234]

some more videos on my updated "annealeez" annealer!

https://www.youtube.com/playlist?list=PLCyPEnjRX7eboyMG5aXLgO4cFzvDQznBj

 

[Unknown]

Regardless of how carefully I reloaded for 308, I continued having an occasional case sticking in the chamber in my gas gun until I began using a small base sizing die. The Forster small base die solved the problem, and the rifle is now very reliable.

FWIW, that gas gun has one hell of an extractor...if a case would stick in the chamber the extractor would tear a chunk out of the extractor rim..not bend it, but actually rip a chunk out of the rim. I keep a foot long piece of .25" bronze brazing rod in my range bag for just such occasions. The bronze rod would easily knock the stuck case out. You can buy bronze brazing rod at welding supply places.

 

[elfster1234]

never had to use a small base die. in my own experience with stuck cases = headspace was never bumped... when I run into people having the same issue and think they need a small base die (which im not saying you didn't need one), and I ask them how much they are bumping the brass headspace from fireformed & they can't answer that questions = more times than not they don't know and is most likely their problem of not headspacing the brass correctly (about .003 to .005 from fire formed)...

Regardless of how carefully I reloaded for 308, I continued having an occasional case sticking in the chamber in my gas gun until I began using a small base sizing die. The Forster small base die solved the problem, and the rifle is now very reliable.

FWIW, that gas gun has one hell of an extractor...if a case would stick in the chamber the extractor would tear a chunk out of the extractor rim..not bend it, but actually rip a chunk out of the rim. I keep a foot long piece of .25" bronze brazing rod in my range bag for just such occasions. The bronze rod would easily knock the stuck case out. You can buy bronze brazing rod at welding supply places.

 

[Unknown]

The first things I checked was how much the shoulder was set back, and brass length. I was also measuring ammo for run out, and checking darned near any other measurements I could think of including neck thickness of the cases. The regular 308 die just wasn't sizing the lower portion of the case sufficiently. The small base die fixed my issue, even though the shoulder set back, and case length remained the same (like you said 3-5 thousandths). The same ammo through a TRG22 worked just fine, but the chamber in the TRG was a little larger.

The only variable that changed in order to get the rifle to work reliably was small base die. I fought that darned rifle for a couple of years before I tried a small base die as I had never needed a small base die for any of my 5.56 rifles.

 

[65Bowite]

Thanks for doing the videos and sharing here dude. Just getting into reloading .223 and well needless to say I need to learn more. I appreciate the head space how to and DIY annealer.

 

[elfster1234]

Np at all, glad to help!

Thanks for doing the videos and sharing here dude. Just getting into reloading .223 and well needless to say I need to learn more. I appreciate the head space how to and DIY annealer.

 

[elfster1234]

Quick taste in 58 seconds of what it takes to produce elfster reloads. Everyone has their own method to their madness. This is just mine LOL ?

 

[Fret]

Quick taste in 58 seconds of what it takes to produce elfster reloads. Everyone has their own method to their madness. This is just mine LOL ?

Hey Elfster, I'm enjoying your new reloading videos done in real time. I'm going to start reloading for my AR15s and your previous videos are a great help. I want to try and make some ammo that's more consistent than the factory match stuff. Your new videos are super in that it gives me an idea of how long each procedure takes and the questions you take and answer are also a big plus. I just got the Lyman brass center tool and the Dillon 600 swager you recommended and have a lot of other stuff on their way. You're saving me a lot of time figuring out what things are really needed and what works well. Oh, and I got the .223 WTF tool. LOL

Thank you very much and hope you keep doing your great videos!!!!

 

[elfster1234]

You betcha my friend! Glad I can help and kick me any questions ya might have! Take it easy!

Hey Elfster, I'm enjoying your new reloading videos done in real time. I'm going to start reloading for my AR15s and your previous videos are a great help. I want to try and make some ammo that's more consistent than the factory match stuff. Your new videos are super in that it gives me an idea of how long each procedure takes and the questions you take and answer are also a big plus. I just got the Lyman brass center tool and the Dillon 600 swager you recommended and have a lot of other stuff on their way. You're saving me a lot of time figuring out what things are really needed and what works well. Oh, and I got the .223 WTF tool. LOL

Thank you very much and hope you keep doing your great videos!!!!

 

[elfster1234]

Here is the start of the new LIVE STREAMED reloading event start to finish. Hope it helps especially with the live questions and real time reloading.

LIVE STREAM RELOADING EVENT! 223 start to finish!

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

www.youtube.com

 

[Fret]

Hey, I have a question for you. With brand new Lake City brass, are there any steps that can be skipped in brass prep? I would guess swaging the primer pocket and the initial cleaning won't be needed to be done.

Do you have more photos of your t-shirts, what colors are available, are they 100% cotton, and how's the sizing?

Thanks!

Earl

 

[elfster1234]

With crimped brass, you only need to initially swage the first time and uniform the first time. Cleaning is always needed as you need clean brass for lubing and sizing

Hey, I have a question for you. With brand new Lake City brass, are there any steps that can be skipped in brass prep? I would guess swaging the primer pocket and the initial cleaning won't be needed to be done.

Do you have more photos of your t-shirts, what colors are available, are they 100% cotton, and how's the sizing?

Thanks!

Earl

 

[elfster1234]

Here is a pic of the shirts! Medium, large, XL, and I think I have a couple XXL left

 

[elfster1234]

Poly blend, sublimation too = last a long long time

 

[Fret]

I'd like to buy a large and a med. How do I do that?

Oh, and my question was on brand new unfired Lake City brass. Do those have the primer pocket crimps on them?

 

[elfster1234]

Sent ya a private message on the shirts.

Yes, all lake city military brass has a crimp that you initially need to swage or use a reamer on, or cut out (carefully not to cut out too much)

I'd like to buy a large and a med. How do I do that?

Oh, and my question was on brand new unfired Lake City brass. Do those have the primer pocket crimps on them?

 

[Fret]

Sent ya a private message on the shirts.

Yes, all lake city military brass has a crimp that you initially need to swage or use a reamer on, or cut out (carefully not to cut out too much)

I have a whole bunch of Hornady once fired brass and brass from .223 Fiocchi that I shot that has a GFL stamp on it but you seem to like the Lake City brass so I ordered a lot of it and will use that on my first reloading attempt to keep things as simple as possible.

Thanks for the Paypal link. Those are nice looking t-shirts.

Got another dumb question. I'm thinking of setting up my reloading equipment in my house. Is that a good idea or should I set it up in my attached garage or separate shop? Where do you reload?

 

[elfster1234]

Good chance that I’ll will be going LIVE STREAMED tonight for part 4 of the live reloading event at 5:30 to 6pm central time. Will try to give a 30min heads up of the exact time on my Elfsters Rifles and reloading Facebook page and on YouTube comments sections. If ya missed the first 3 parts:

 

[Fret]

Hey that was a really great video/livestream. Thank you for all the good info! I'm learning a lot.

 

[elfster1234]

You betcha! Glad to help!

Hey that was a really great video/livestream. Thank you for all the good info! I'm learning a lot.

 

[elfster1234]

I will be STREAMING LIVE Sunday 6/23/19 11am central time for the 5th installment of the reloading start to finish series! I will be doing another GIVEAWAY during the live event also! And it’s not going to be a t-shirt this time around! Going over topics of trimming, chamfering, deburring, and seating primers = done with brass prep hell! Here are the 1st 4parts of this LIVE series I’d you missed it, where you can questions as we go, LIVE: https://www.youtube.com/playlist?list=PLCyPEnjRX7eZkje82YqbMCV1ETBeFBSxB

 

[cobus13]

thank you

 

[Tacovrd]

subd

 

[dhunt]

Elfster4321 [IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/media.scout.com\/media\/avatars\/4\/5\/Elfster4321.gif"}[/IMG2]


XFirst Sergeant
Rating: 2.9/5 this site
1332 posts this site
reloading 223 & 308 with 6x5 live fire last episode
Tuesday at 7:23 AM

---

I understand everyone has their own method to their madness and this is just what I do...... and I might be a little bias to this all LOL! But if you're new I really don't think you'll find a better playlist on how to reload for a semi auto.... or even bolt action if you full length resize:



reloading start to finish

Thanks for sharing!

 

[dhunt]

How to make an annealer for about $100! Parts list in the description box of this video on my YouTube page!

Great video!