Rimfire Vudoo V22 AICS Single Shot Adapter, Bolt Disassembly Cocking Tool, Mag Loader Tool, Magazine Bench Tray, Bullet Lifter

[Mississippi327]

Are you still making these if so I would like a single shot adapter, a pen, bolt disassembly tool and mag loader.

 

[Panther]

I am, thanks… I’ll PM you payment info shortly.

 

[mcbbmd]

Is the single shot adapter still available?
Thanks!

 

[Panther]

Is the single shot adapter still available?
Thanks!

Yes, all of the items listed are still available. I usually keep some ready-made on the shelf, and the single-shot adapter is one of those. I have one in white available right now, along with the 'pen' cartridge holders. PM me and I'll send you payment info for the $25 (or $28 if you also want the cartridge 'pen'). MIKE

 

[BullTahr]

Panther,
I would like 5 of the pen cartridge holders (any available color is okay). I've ordered from you a couple of times and like your products.

 

[Panther]

*Five* ? Are you buying for friends too?

I do have five here on the shelf. Send me the $18.50 (includes postage) same way as before. MIKE

 

[FiftyOuts]

I would like to buy a single shot adapter for Vudoo.
Fiftyouts

 

[Panther]

I would like to buy a single shot adapter for Vudoo.

PM with payment info sent!

 

[ken9cz]

I have 3D-printed parts available for the Vudoo V22. These are all things that I made for myself and use them with my Vudoo, but then other Vudoo shooters at local matches wanted some too. I’m making them available to our ‘Hide members here. Most items are made to order, so you can pick your colors and/or options.... If you're like me and color doesn't really matter, I'll just pick it out for you based on what I have already made or the filament I've got loaded in the 3D printer.

I combine shipping... you basically pay $3-$3.50 shipping on just your first item and the rest going into the same package are discounted.

1. Single-shot Adapter: For F-Class and other matches that require single-shot loading, I have a lightweight magwell insert/adapter that is topped with a "sled" for loading a single round at a time. As I'm sure you've seen on your gun, there's not much exposed room in a repeater action when the bolt is open, but the "sled" is as big as possible while still clearing the bolt surfaces and putting the bullet at the correct angle so that the bolt pushes it smoothly into the chamber. If your fingers aren't thin or as nimble as they used to be, consider the "single-cartridge 'pen' holder" below to use with this. I most commonly make these adapters in yellow or white (makes it obvious to the match director that you're not using a standard magazine), but can be 3D-printed in gray, or black on request. $25 shipped.

2. A single-cartridge "pen" holder-- a rod type tool that holds one 22 cartridge slip-fit by the base that you can use along with (or without) the single-shot sled to aid in inserting a single cartridge -- great for cold days, gloved hands, or just less-than-nimble or pudgy fingers. $3 when shipped with a single-shot adapter or add $3.50 shipping if ordered alone. I have them pre-made in white or yellow, but they can also be made in gray, or black.

3. A V22 bolt assembly/disassembly/cocking/decocking/recocking tool, similar to the one offered by Vudoo Gun Works. If you ever over-rotate your bolt and the cocking piece ends up in the cocking ramp (you've just accidently de-cocked your bolt), this tool also EASILY allows you to move it back to normal cocked position in about 2 seconds without *any* disassembly so you can slip your bolt back into your gun. $21 shipped, or $18 if you're already paying shipping on another item being mailed at the same time. This tool works on V22 repeater bolts *and* V22s single-shot bolts. I guarantee that this works as described, and that it works just like the more expensive version available direct from VGW. I most commonly make these in white or yellow (easy to find in your range bag or your tool kit), but can also be made in red, black or gray.

4. A thumb-assist magazine loader for V22 repeater magazines. These work on both polymer and metal type magazines, but if you buy metal mags from Vudoo, they all come with a gadget like this anyway. Especially for us polymer mag owners, if you have trouble pulling down on the magazine follower spring buttons "just right" to avoid rim-lock, then this tool is for you. It gives you just the right depth before you drop in the next cartridge. This is also really helpful if you use replacement magazine extended baseplates for 12 or more cartridges such that you've had to remove the load-assist buttons. Another use: if you have a polymer magazine that is a little "tight" at the top and that first round doesn't freely drop when you pull down on the spring assist buttons, this gadget will overcome that easily. I most often make these in yellow or white (easy to find in your range bag) but also can be made in black or gray. $13 shipped, or $10 if you're already paying shipping on another item being mailed at the same time.

5. V22 Magazine Caps -- if you like to pre-load your magazines before going to the range, these slip-on/snap-in caps protect that exposed top cartridge from bullet damage. They only work on at least partially loaded magazines (otherwise on a fully empty magazine the follower buttons get in the way). Unless you state otherwise, you'll get them sized for Vudoo's polymer magazines, but slightly different ones for the Vudoo metal mags are available on request. Available in translucent clear, white, yellow, red, black, or gray. $7 for five, $13 for ten, including shipping with any other item. If ordered alone, add $3.50 for shipping for up to quantity 15.

6. V22 Magazine Bench Tray -- Hold five Vudoo magazines (with or without mag base extensions) on the bench to keep you (me) organized during a match. The mags sit at a tilt, ready to grab, but the slots are not tight so there's no fumbling. This is ONLY made in BLACK. It can be produced personalized with your name molded into both sides for $5 more, otherwise text will be "VUDOO". $25 shipped (uses a lot of plastic and takes over 15 hours to 3D print!). Sorry, this is the only one of my items that doesn't benefit from combined shipping since it usually has to go in a separate package.

7. V22 Magazine Extension -- Replaces baseplate on the V22 *polymer* magazines to allow an extra one (11 total) or two (12 total) cartridges (one extra cartridge as shown, if you want two extra cartridges, you have to remove the load assist buttons). I personally run these on my mags set up for 11 rounds -- treating one as a "spare" just in case. If you're sure you only want a single extra round, then ask for the "Low Profile" version, otherwise you'll get the taller one that can take 12 rounds. These also have numbers 1 through 6 on the bottom with a corresponding dimple in which you can put a dab of paint or fingernail polish if you like to keep your magazines individually identified. Usually made in black or gray, but can also be done in white or yellow. The larger one can be made with or without "VUDOO" on the sides, will have "VUDOO" if you don't specify otherwise. $10 each, $45 for five. Add $3.50 shipping if you are not combining with other items.

8. V22 Trigger Spacers -- If you're going to send your V22 barreled action to Lapua or Killough/Eley for ammo testing, be very careful with your trigger so it doesn't get damaged in shipping. What I did was make two spacers (sort of like stock bedding pillars) to hold the trigger guard/base metal in place to protect my actual TriggerTech Diamond trigger assembly while my barreled action was out of the stock and being transported. Of course you can get something similar from the hardware store, but if you want these, they're the correct diameter and length and $2 for the pair. Add $3.50 shipping if you are not combining with other items.

I would like one of the Single-Shot Adapters

 

[Panther]

I would like one of the Single-Shot Adapters

PM with payment info sent!

 

[JohnTheFisherman]

Pm sent

 

[johnsun_55]

I’d like to buy a single shot adapter, pen holder and mag loader. Color really doesn’t matter, but yellow if you have it. My Vudoo is a gen 2.
Let me know how to pay, and thanks.

 

[Panther]

I’d like to buy a single shot adapter, pen holder and mag loader. Color really doesn’t matter, but yellow if you have it. My Vudoo is a gen 2.
Let me know how to pay, and thanks.

That’s $38 total with postage. I’ll PM you payment info shortly. MIKE

 

[NM Desertrat]

I would like to order a single shot adapter, a pen holder and a thumb assist mag loader.
Thanks, Mike

 

[Panther]

I would like to order a single shot adapter, a pen holder and a thumb assist mag loader.
Thanks, Mike

That’s $38 total with postage. I’ll PM you payment info shortly. MIKE

 

[Kyle111]

I would like to order a vudoo and Bergara single shot adapter if you have them available

 

[Panther]

Hi Kyle: I don’t have Bergara stuff, but I do have the Vudoo Single Shot adapter.

It’s $25 shipped. I'll PM you additional info about payment.

 

[Trung Si Ma]

Any chance for a mag loader for the Tikka T1x?

 

[JerryP]

I would like the bullet tray and bullet lifter box. Let me know how much. Thanks.

 

[Panther]

Any chance for a mag loader for the Tikka T1x?

I don't have a Tikka T1x in my collection, and therefore no magazines... but if you wanted to mail me one temporarily, I'd be glad to design a loader for it. MIKE

 

[Panther]

I would like the bullet tray and bullet lifter box. Let me know how much. Thanks.

Hi Jerry: Look for a PM from me!

 

[Trung Si Ma]

I don't have a Tikka T1x in my collection, and therefore no magazines... but if you wanted to mail me one temporarily, I'd be glad to design a loader for it. MIKE

Send me your address and I'll either ship you one of mine or order a new one to be sent to you and then you can send it on to me when you send me the parts that I order.

 

[Panther]

Send me your address and I'll either ship you one of mine or order a new one to be sent to you and then you can send it on to me when you send me the parts that I order.

OK, look for a PM momentarily!

 

[LeoK]

Three mag caps
one mag loader
one box lifter
What colors can I get

 

[Panther]

Three mag caps
one mag loader
one box lifter
What colors can I get

Look for a PM from me with details!

 

[gkgeiger]

Are these still available on eBay? If yes how about a link? Thanks

 

[Panther]

Some things, not the lifter. See:

Vudoo V22 Single Shot Adapter, Bolt Disassembly Cocking Tool, Mag Loader Tool | eBay

I have 3D-printed parts available for the Vudoo V22. I started making them available to Sniper's Hide Rimfire folks, and now here. If you ever over-rotate your bolt and the cocking piece ends up in the cocking ramp (you've just accidently de-cocked your bolt), this tool also EASILY allows you to...

www.ebay.com

but they can all be purchased direct from me here too.

MIKE

 

[Mikewildcat3d]

I would like to purchase one Bullet Tray "Lifter Box" and a single-cartridge "pen" holder, please send me payment information. Thanks

 

[Panther]

Look for a PM from me with info for payment. MIKE

 

[rino451]

Any idea whether your V22 Magazine Caps fit the L3I magazines?

 

[Panther]

Any idea whether your V22 Magazine Caps fit the L3I magazines?

It *looks* like it would, but I actually have no idea -- I don't have one of those mags. If you want to send me one temporarily, I'll see if they fit, and if they don't, I'll modify the design so that they do.

 

[fredfish]

I have 3D-printed parts available for the Vudoo V22. These are all things that I made for myself and use them with my Vudoo, but then other Vudoo shooters at local matches wanted some too. I’m making them available to our ‘Hide members here. Most items are made to order, so you can pick your colors and/or options.... If you're like me and color doesn't really matter, I'll just pick it out for you based on what I have already made or the filament I've got loaded in the 3D printer.

I combine shipping... you basically pay $3-$3.50 shipping on just your first item and the rest going into the same package are discounted.

1. Single-shot Adapter: For F-Class and other matches that require single-shot loading, I have a lightweight magwell insert/adapter that is topped with a "sled" for loading a single round at a time. As I'm sure you've seen on your gun, there's not much exposed room in a repeater action when the bolt is open, but the "sled" is as big as possible while still clearing the bolt surfaces and putting the bullet at the correct angle so that the bolt pushes it smoothly into the chamber. If your fingers aren't thin or as nimble as they used to be, consider the "single-cartridge 'pen' holder" below to use with this. I most commonly make these adapters in yellow or white (makes it obvious to the match director that you're not using a standard magazine), but can be 3D-printed in gray, or black on request. $25 shipped.

2. A single-cartridge "pen" holder-- a rod type tool that holds one 22 cartridge slip-fit by the base that you can use along with (or without) the single-shot sled to aid in inserting a single cartridge -- great for cold days, gloved hands, or just less-than-nimble or pudgy fingers. I made this so that I never "miss" when putting a cartridge in place on the single-shot adapter. I use this same tool in combination with single-shot adapters with my CZ and Anschutz too. You slip the back of a cartridge into it (see photo) and then start the cartridge into the chamber, easily pull the holder away and then simply use the bolt to finish seating the cartridge into the chamber. $3 when shipped with a single-shot adapter or add $3.50 shipping if ordered alone. I have them pre-made in white or yellow, but they can also be made in gray, or black.

3. A V22 bolt assembly/disassembly/cocking/decocking/recocking tool, similar to the one offered by Vudoo Gun Works. If you ever over-rotate your bolt and the cocking piece ends up in the cocking ramp (you've just accidently de-cocked your bolt), this tool also EASILY allows you to move it back to normal cocked position in about 2 seconds without *any* disassembly so you can slip your bolt back into your gun. $21 shipped, or $18 if you're already paying shipping on another item being mailed at the same time. This tool works on V22 repeater bolts *and* V22s single-shot bolts. I guarantee that this works as described, and that it works just like the more expensive version available direct from VGW. I most commonly make these in white or yellow (easy to find in your range bag or your tool kit), but can also be made in red, black or gray.

4. A thumb-assist magazine loader for V22 repeater magazines. These work on both polymer and metal type magazines, but if you buy metal mags from Vudoo, they all come with a gadget like this anyway. Especially for us polymer mag owners, if you have trouble pulling down on the magazine follower spring buttons "just right" to avoid rim-lock, then this tool is for you. It gives you just the right depth before you drop in the next cartridge. This is also really helpful if you use replacement magazine extended baseplates for 12 or more cartridges such that you've had to remove the load-assist buttons. Another use: if you have a polymer magazine that is a little "tight" at the top and that first round doesn't freely drop when you pull down on the spring assist buttons, this gadget will overcome that easily. I most often make these in orange, yellow, or white (easy to find in your range bag) but also can be made in black or gray. $13 shipped, or $10 if you're already paying shipping on another item being mailed at the same time.

5. V22 Magazine Caps -- if you like to pre-load your magazines before going to the range, these slip-on/snap-in caps protect that exposed top cartridge from bullet damage. They only work on at least partially loaded magazines (otherwise on a fully empty magazine the follower buttons get in the way). Unless you state otherwise, you'll get them sized for Vudoo's polymer magazines, but slightly different ones for the Vudoo metal mags are available on request. Available in translucent clear(!), white, yellow, red, black, or gray. $7 for five, $13 for ten, including shipping with any other item. If ordered alone, add $3.50 for shipping for up to quantity 15.

6. V22 Magazine Bench Tray -- Hold five Vudoo magazines (with or without mag base extensions) on the bench to keep you (me) organized during a match. The mags sit at a tilt, ready to grab, but the slots are not tight so there's no fumbling. This is ONLY made in BLACK. It can be produced personalized with your name molded into both sides for $5 more, otherwise text will be "VUDOO". $25 shipped (uses a lot of plastic and takes over 15 hours to 3D print!). Sorry, this is one of the few of my items that don't benefit from combined shipping since it usually has to go in a separate package.

7. V22 Magazine Extension -- Replaces baseplate on the V22 *polymer* magazines to allow an extra one (11 total) or two (12 total) cartridges (one extra cartridge as shown, if you want two extra cartridges, you have to remove the load assist buttons). I personally run these on my mags set up for 11 rounds -- treating one as a "spare" just in case. If you're sure you only want a single extra round, then ask for the "Low Profile" version, otherwise you'll get the taller one that can take 12 rounds. These also have numbers 1 through 6 on the bottom with a corresponding dimple in which you can put a dab of paint or fingernail polish if you like to keep your magazines individually identified. Usually made in black or gray, but can also be done in white or yellow. The larger one can be made with or without "VUDOO" on the sides, will have "VUDOO" if you don't specify otherwise. $10 each, $45 for five. Add $3.50 shipping if you are not combining with other items.

8. V22 Trigger Spacers -- If you're going to send your V22 barreled action to Lapua or Killough/Eley for ammo testing, be very careful with your trigger so it doesn't get damaged in shipping. What I did was make two spacers (sort of like stock bedding pillars) to hold the trigger guard/base metal in place to protect my actual TriggerTech Diamond trigger assembly while my barreled action was out of the stock and being transported. Of course you can get something similar from the hardware store, but if you want these, they're the correct diameter and length and $2 for the pair. Add $3.50 shipping if you are not combining with other items.

9. Chamber/Safety Block -- If you don't like the idea of putting a plastic safety flag in your hot chamber, this is for you. Typically made in bright yellow, orange or red, this is similar to the single-shot adapter, but without the sled, and instead visibly blocks the chamber as a safety device with the bolt open or removed. $20, and add $3.50 shipping if you are not combining with other items.

10. Bullet Bench Tray -- If you're shooting a match with a V22-S or otherwise need to feed single-shot, I made this tray with the cartridges in 5-shot sets. Holds 60 rounds in the twelve 5-shot sets, plus an extra 2+2 in the middle. It's intended to sit on the bench with you (or on your shooting mat if you're prone and/or doing F-Class), and is 4" x 6.5" in size. It's smooth on the bottom, but I'll include a length of neoprene adhesive strip that you can cut up and put on the bottom if you want it to be less slick on your bench or mat surface. $23 shipped (uses a lot of plastic and takes a long time to 3D print!). Sorry, this is one of the few of my items that don't benefit from combined shipping since it usually has to go in a separate package.

11. Bullet Tray "Lifter Box" -- My old fingers have trouble getting the cartridges out of the Lapua or SK boxes one-by-one to load into magazines or to take out and put in a bench tray for single shot feed. The lube can be messy so I don't like to just dump them out, so I've made a simple fixture that you put the 50-round tray in right out of the box, and it raises the shells up -- with the rows in alternating heights -- to make them easy to grab without having to pry them up with my fingernails. Not a big deal, but takes care of a small annoyance. The staggered rows are tall enough so that you can use it for single-shot direct loading if you don't have another block to use like my one in #10. NOTE: I now have versions for RWS and Eley Match in addition to the SK/Lapua ones. The Lapua and SK box trays are identical in size so both will work in the same fixture. The RWS box insert is larger so it has its own version (the Lapua/SK trays can fit in the RWS fixture, but they're quite loose and better in their properly-sized fixture). Eley ammo boxes don't have these kinds of trays, but have a flat rectangular panel that you have to pop out of their box... I have a version of the lifter that you can drop in and put the panel back on the original box, and easily take it back out when you're done. This works with Eley's flip-top boxes (Match/black box, Club, Contact, Force, etc) but not their slide-out type box (Tenex). All versions are $13 each. Add $3.50 shipping if you're not combining with any other items.

3- cartridge holders,1- RWS lifter, 1- Eley lifter, 1- bolt tool
Fred

 

[Panther]

3- cartridge holders,1- RWS lifter, 1- Eley lifter, 1- bolt tool
Fred

I'll send you a PM momentarily!

 

[JimTN]

Mike;
Want to order:
Lapua Ammo tray RED
V22 bolt re-cocking tool RED
Eley Lifter Tray RED

PM me with payment details and $$ owed, no PP by me

TIA
Jim

 

[hacabrera071]

Can I please take a yellow sled and a black mag tray? Please dm me info.

Thank you!

 

[Panther]

Mike;
Want to order:
Lapua Ammo tray RED
V22 bolt re-cocking tool RED
Eley Lifter Tray RED

PM me with payment details and $$ owed, no PP by me

TIA
Jim

Hi Jim: That'll be $13+$21+$13 = $47 including postage. I'll PM you momentarily. MIKE

 

[Panther]

Can I please take a yellow sled and a black mag tray? Please dm me info.

Thank you!

Look for a private message from me shortly! MIKE

 

[JohnTheFisherman]

sending pm

 

[Tall Pine]

Nice stuff! Tag for a future order

 

[BullTahr]

I would like to order 2 bullet tray lifter boxes, 1 for Lapua and 1 for Eley. I have several of your other products and they all work well.

 

[Panther]

I would like to order 2 bullet tray lifter boxes, 1 for Lapua and 1 for Eley. I have several of your other products and they all work well.

Thanks, that'll be $13 x qty 2+$5 shipping. I'll send you a PM reminding you the payment details for the $31 total. And I appreciate knowing you're happy with the items you've already gotten from me! MIKE

 

[JohnTheFisherman]

Pm coming with another order

 

[wilsonjthree]

Hello, I'm interested in getting one of your single shot adapters for my Vudoo 360. I've adapted my magazine but they still don't work properly.

Help Please

 

[Panther]

Hello, I'm interested in getting one of your single shot adapters for my Vudoo 360. I've adapted my magazine but they still don't work properly.

Help Please

I’ll send you. PM, but meanwhile, how have you “adapted” your magazines?

 

[Longshot231]

I ordered and received; a Single-Shot Adapter, Thumb Assisted Magazine Loader, V22 Magazine Bench Tray and some Single Cartridge Pen Holders.

The quality is top notch. I especially like the magazine loader and single cartridge pen holder.

I loaded up all five of my magazines and completely avoided the headaches associated with rim lock!

The single cartridge pen holder makes chambering a single cartridge so much nicer. This gadget will come in handy during cold weather.

One would think that sliding the case head in the cartridge holder too time consuming. Quite the opposite is true. People sausage fingers won't have to waste time and experience frustration with trying to chamber a round and risk gouging the projectile to the detriment of accuracy.

Many thanks to @Panther for making such outstanding products!

 

[BroDave]

Sir, I would like to order:
1-Single shot adapter @ $25
1-Single cartridge holder @$3
1-Bolt tool @$18
1-Mag loader @$10
1-Mag bench tray @$30
If prices have increased since your initial posting just let me know.
Please provide total with shipping and I will be able to remit via Zelle or US Postal MO at your preference

Thanks, BroDave

 

[Eagle_7]

I have 3D-printed parts available for the Vudoo V22. These are all things that I made for myself and use them with my Vudoo, but then other Vudoo shooters at local matches wanted some too. I’m making them available to our ‘Hide members here. Most items are made to order, so you can pick your colors and/or options.... If you're like me and color doesn't really matter, I'll just pick it out for you based on what I have already made or the filament I've got loaded in the 3D printer. If you're not familiar with 3D print items, they're made layer-by-layer by melting plastic filament through a 3D printer, and may have cosmetic imperfections (layers visible, etc), but I guarantee that they'll do the job they're designed to do!

I combine shipping... you basically pay $4-5 shipping (sorry, had to raise it) on just your first item and the rest going into the same package are discounted.

1. Single-shot Adapter: For F-Class and other matches that require single-shot loading, or just because you prefer it, I have a lightweight magwell insert/adapter that is topped with a "sled" for loading a single round at a time. As I'm sure you've seen on your gun, there's not much exposed room in a repeater action when the bolt is open, but the "sled" is as big as possible while still clearing the bolt surfaces and putting the bullet at the correct angle so that the bolt pushes it smoothly into the chamber. If your fingers aren't thin or as nimble as they used to be, consider the "single-cartridge 'pen' holder" below to use with this. I most commonly make these adapters in yellow or white (makes it obvious to the match director that you're not using a standard magazine), but can be 3D-printed in gray, or black on request. NEW: As a special request by a shooter that uses a joystick bipod where the joystick hits their magazines (and so also a normal single-shot adapter), I have developed a "compact" version that sits almost flush with the bottom of your rifle stock, with just enough exposed to grab to seat or remove (see image of model below). If you don't specify this "compact" version specifically, though, you'll get the regular, magazine-sized version. Either version is $25 shipped.

2. A single-cartridge "pen" holder-- a rod type tool that holds one 22 cartridge slip-fit by the base that you can use along with (or without) the single-shot sled to aid in inserting a single cartridge -- great for cold days, gloved hands, or just less-than-nimble or pudgy fingers. I made this so that I never "miss" when putting a cartridge in place on the single-shot adapter. I use this same tool in combination with single-shot adapters with my CZ and Anschutz too. You slip the back of a cartridge into it (see photo) and then start the cartridge into the chamber, easily pull the holder away and then simply use the bolt to finish seating the cartridge into the chamber. $4 when shipped with a single-shot adapter or add $4 shipping if ordered alone. I usually have them pre-made in white or yellow or gray.

3. A V22 bolt assembly/disassembly/cocking/decocking/recocking tool, similar to the one offered by Vudoo Gun Works. If you ever over-rotate your bolt and the cocking piece ends up in the cocking ramp (you've just accidently de-cocked your bolt), this tool also EASILY allows you to move it back to normal cocked position in about 2 seconds without *any* disassembly so you can slip your bolt back into your gun. $22 shipped, or $18 if you're already paying shipping on another item being mailed at the same time. This tool works on V22 repeater bolts *and* V22s single-shot bolts. I guarantee that this works as described, and that it works just like the more expensive version available direct from VGW. I most commonly make these in white, yellow or orange (easy to find in your range bag or your tool kit), but can also be made in red, black or gray.

4. A thumb-assist magazine loader for V22 repeater magazines. These work on both polymer and metal type magazines, but if you buy metal mags from Vudoo, they all come with a gadget like this anyway. Especially for us polymer mag owners, if you have trouble pulling down on the magazine follower spring buttons "just right" to avoid rim-lock, then this tool is for you. It gives you just the right depth before you drop in the next cartridge. This is also really helpful if you use replacement magazine extended baseplates for 12 or more cartridges such that you've had to remove the load-assist buttons. Another use: if you have a polymer magazine that is a little "tight" at the top and that first round doesn't freely drop when you pull down on the spring assist buttons, this gadget will overcome that easily. I most often make these in orange, yellow, or white (easy to find in your range bag) but also can be made in black or gray. $14 shipped, or $10 if you're already paying shipping on another item being mailed at the same time.

5. V22 Magazine Caps -- (temporarily discontinued)

6. V22 Magazine Bench Tray -- Hold five Vudoo polymer magazines (with or without mag base extensions) on the bench to keep you (me) organized during a match. The mags sit at a tilt, ready to grab, but the slots are not tight so there's no fumbling. This is ONLY made in GRAY or BLACK. It can be produced personalized with your name molded into both sides for $5 more, otherwise text will be "VUDOO". $30 shipped (uses a lot of plastic and takes over 15 hours to 3D print!). Sorry, this is one of the few of my items that don't benefit from combined shipping since it usually has to go in a separate package.

7. V22 Magazine Extension -- Replaces baseplate on the V22 *polymer* magazines to allow an extra one (11 total) or two (12 total) cartridges (one extra cartridge as shown, if you want two extra cartridges, you have to remove the load assist buttons). I personally run these on my mags set up for 11 rounds -- treating one as a "spare" just in case. If you're sure you only want a single extra round, then ask for the "Low Profile" version (definitely more popular), otherwise you'll get the taller one that can take 12 rounds. These also have numbers 1 through 6 on the bottom with a corresponding dimple in which you can put a dab of paint or fingernail polish if you like to keep your magazines individually identified. I usually keep some on the shelf made in gray or black. The larger one can be made with or without "VUDOO" on the sides, will have "VUDOO" if you don't specify otherwise. $10 each, $45 for five. Add $5 shipping if you are not combining with other items.

8. V22 Trigger Spacers -- If you're going to send your V22 barreled action to Lapua or Killough/Eley for ammo testing, be very careful with your trigger so it doesn't get damaged in shipping. What I did was make two spacers (sort of like stock bedding pillars) to hold the trigger guard/base metal in place to protect my actual TriggerTech Diamond trigger assembly while my barreled action was out of the stock and being transported. Of course you can get something similar from the hardware store, but if you want these, they're the correct diameter and length and $2 for the pair. Add $4 shipping if you are not combining with other items.

9. Chamber/Safety Block -- If you don't like the idea of putting a plastic safety flag in your hot chamber, this is for you. Typically made in bright yellow, orange or red, this is similar to the single-shot adapter, but without the sled, and instead visibly blocks the chamber as a safety device with the bolt open or removed. $20, and add $5 shipping if you are not combining with other items.

10. Bullet Bench Tray -- If you're shooting a match with a V22-S or otherwise need to feed single-shot, I made this tray with the cartridges in 5-shot sets. Holds 60 rounds in the twelve 5-shot sets, plus an extra 2+2 in the middle. It's intended to sit on the bench with you (or on your shooting mat if you're prone and/or doing F-Class), and is 4" x 6.5" in size. It's smooth on the bottom, but I'll include a length of neoprene adhesive strip that you can cut up and put on the bottom if you want it to be less slick on your bench or mat surface. $30 shipped (uses a lot of plastic and takes a long time to 3D print!). Sorry, this is one of the few of my items that don't benefit from combined shipping since it usually has to go in a separate package.

11. Bullet Cartridge Tray "Lifter Boxes" for Lapua, SK, RWS, and Eley... and now also CCI Std Velocity and Norma TAC-22 -- My old fingers have trouble getting the cartridges out of the Lapua or SK boxes one-by-one to load into magazines or to take out and put in a bench tray for single shot feed. The lube can be messy so I don't like to just dump them out, so I've made a simple fixture that you put the 50-round tray in right out of the box, and it raises the shells up -- with the rows in alternating heights -- to make them easy to grab without having to pry them up with my fingernails. Not a big deal, but takes care of a small annoyance. The staggered rows are tall enough so that you can use it for single-shot direct loading if you don't have another block to use like my one in #10. NOTE: I now have versions for RWS and Eley Match in addition to the SK/Lapua ones. The Lapua and SK box trays are identical in size so both will work in the same fixture. The RWS box insert is larger so it has its own version (the Lapua/SK trays can fit in the RWS fixture, but they're quite loose and better in their properly-sized fixture). What I've done is "tailor-made" each style for that specific manufacturer. Eley ammo boxes don't have these kinds of trays, but have a flat rectangular panel that you have to pop out of their box... I have a version of the lifter that you can drop in and put the panel back on the original box, and easily take it back out when you're done. This works with Eley's flip-top boxes (Match/black box, Club, Contact, Force, etc) but not their slide-out type box (Tenex). Added February 2023: If you use CCI Std Velocity or Norma TAC-22 for practice/plinking ammo, I have versions for them too! All versions are $13 each. Add $5 shipping if you're not combining with any other items, but that $5 will cover as many as SIX of the lifter boxes in one package.

I’d like to buy the following:
1. A Single-shot Adapter - either black, blue, or green.
2. A single-cartridge "pen" holder - any color
3. A thumb-assist magazine loader - any color
4. A V22 Magazine Extension - either black, blue, or green
5. A Chamber/Safety Block - red
6. A Bullet Bench Tray - any color
thanks.

 

[Panther]

Hello Eagle -- I'll respond via PM with payment details. MIKE

 

[KING2]

HELLO PANTHER
I WOULD LIKE TO ORDER ONE OF YOUR SINGLE SHOT MAGAZINES FOR A VUDOO. IVE GOT A 360 RIGHT BOLT LEFT PORT ID LIKE TO TRY IT ON. IS THERE A WAY I COULD SEND YOU A MONEY ORDER ? IM NOT AN ONLINE BUYER. THANK YOU GREG

 

[KING2]

ALSO DO YOU HAVE A SITE THAT SHOWS YOUR PRODUCTS ? THANKS AGAIN