I have a Nightforce 12x42 NXS to put on a Rem 700 short action. It will be mostly used in local comps. Also what bases are you using ??
Thank you,
6mmRem
Thank you,
6mmRem
-
Having trouble using the site?
Contact support
F T/R Competition What 30mm rings/ bases are you using
- Thread starter 6mmRem
- Start date
I use the EGW aluminum 20moa base on my open rifle and have several TPS bases on other guns. Both are very good in my opinion. For my rings I only use the Burris Signature Zee rings with the inserts on scopes I want to make sure don't get marks. On the others I use TPS rings that I lap.
Nightforce Ultra light rings along with a Nightforce base will serve you well. Probably need at least a 20MOA base if you are going to shoot distance with that particular scope.
+1 on the Burris Signature Zee rings. These things are a too well kept secret. You can get inserts for them that will provide the added elevation in lieu of spending the money on a 20 moa base, too. They work great.
Last edited:
Ken Farrell rings and bases, you can get a low profile base and low 30 mm rings and get the scope lower, where it should be.
Thanx for the info ! I will have to start looking for some now, they need to be on my next order !!
Im running Badger rings, steel medium high, but Im going to switch to badger alloy high to accomodate a heavier barrel.
I run Farrell rings with a NightForce 20moa base. The scope is a Sightron 8-32x56 LRMOA. I'm testing everything tomorrow morning at 1,000 yards at this place:
I'm very stoked to be here, at the Carlos Hathcock 308 Challenge!
I'm very stoked to be here, at the Carlos Hathcock 308 Challenge!
Similar threads
