Gunsmithing What bottom metal is this stock cut for????

[Dave Garrett]

Is this stock cut for Detachable Bottom Metal or???? Pics show regular BDL long action bottom metal...Any help would be great

 

[MJB13SRT8]

That looks like a Badger M5 dbm or M4 floorplate inlet.

Montrose

 

[Dave Garrett]

Do any companies make a magazine box that feeds the 28 Nosler real well for the M5 bottom metal????

 

[mudpig]

Should be able to find an AICS pattern single stack 5 rnd mag that'll work out real slick. They normally have 3 long action COAL lengths to choose from 3.715 up to 3.850 (if memory serves right.

 

[Dave Garrett]

Do they make one for the Ultramag sized case.... I see they 300 win.... but not the Untramag... or is it just bending and tuning the feed lips like on a Wyatts box???? The 28 used same feed rails as the Ultramag.... Thanks for any help... Dave

 

[mudpig]

They make them for the 338LM and 300WM, you should be able to get one of those to work with very little modification to the lips.

 

[Dave Garrett]

Thank you for your help... I called AIC and he gave me the rundown....They like to use the 338 Lapua Steel mags for the 28 Nosler ... said with just a small amount of tweaking they feed great... Again thanks for taking the time to help me... Dave

 

[mudpig]

Thank you for your help... I called AIC and he gave me the rundown....They like to use the 338 Lapua Steel mags for the 28 Nosler ... said with just a small amount of tweaking they feed great... Again thanks for taking the time to help me... Dave

VERY WELCOME