What do you rimfire people wish for Christmas?

[texasrimfirenut]

Well I happen to be on here looking at threads when my wife asked once again, "Is there anything else you'd like for Christmas?"

I thought to myself, again, that I'd like to spend a weekend going through @Kisssofdeath gun safe's. Shooting many of his prize possessions and enjoying the weekend.

So the question is: What are you hoping for, rimfire or accessory wise for this Christmas. Whether or not you'll get it. We can all dream and hope.

Won't be on near as much this next week so I hope everyone of you have a Merry Christmas. I have really enjoyed the short time I have been a member here.

 

[BOISCOID]

The CMPs Eley Bulk case to be back in stock. I should have ordered it in November

 

[Badjujuu]

I wrote to Santa for a LH Vudoo, he said 14 weeks bud, but he did deliver a chassis and a scope for it already....

May Santa bring you everything on your list

Merry Christmas and Happy New Years to all.

 

[earthtrekker1775]

World peace

 

[Gjmen22]

An Arnold Machine 1 piece rest would be nice. Or 2 cases of Lapua Test Center ammo matched to my gun of course. Unfortunately Santa doesn't stop by my home.

Gjmen22

 

[Boatninja]

Besides premium ammo? Maybe Magazine loader for B14R and a Bore Guide for the same.

 

[theLBC]

i am thinking about taking the cheap red dot off my takedown lite and putting a real scope that doesn't need batteries.
what i would like is just knowing how much to spend and what to buy without over buying considering it isn't meant to shoot competition.

 

[grapo]

Few cases of center x or sk at normal prices.

 

[Kisssofdeath]

That's pretty good Texasrimfirenut.

I guess I'd like for the Ultimatum Deuce to come in sometime in January.

Been messing around with my AK's lately.

This is a Saiga I said I wasn't going to modify but the forearm I bought didn't fit what I had planned for it to, so I just put it on this Saiga tonight, it's not a permanent mod. The Bushnell Scout scope works really good.

This is my other Saiga. It isn't as accurate as the one above. Not because of the scope but it's simply not as accurate. IIRC it had around a 4" spread at 100 meters on the test target. The one above was around 3" or less. I don't recommend the Troy handguard. It gets too hot.

This was my first AK, the Arsenal SAM7 SF.

This was my first Norinco MAK 90. It has the milled receiver. A little on the ugly side with that stained wood. I thought about refinishing it. This one is said to have never been fired. According to the condition I received it in, I would tend to believe that. I have not fire this one.

This was my second MAK 90. It has the stamped receiver and is noticeably lighter than the milled. It was also said to have been unfired. I've shot around 30 out of it.

This is my third MAK 90. It also has a milled receiver. As you can see it's been modified with a buttsock and pistol grip. The original stock is not bad to shoot, not as bad as I thought it would be. The finish on these MAK90's are heads and tails above the rest. I'm referring to eye appeal, I'm sure it's no more durable than the Arsenal, Molot or Saiga.

This was my first Molot VEPR. The wood was "ok" and the forearm wasn't straight. The buttstock angles didn't mate up nice with the receiver. I was going to send it back but the place said they didn't have anymore to replace it with so I kept it. I decided to heavily modify it because of these reasons.

This is an unmodified Molot VEPR. This one is so nice and everything is near perfect with it. I'll never change this one. I've also never shot it.

This is my sledgehammer. The Molot VEPR 12. I changed the recoil spring to be able to shoot low brass ammo. I also added a buffer to feel comfortable shooting 00 Buck and rifled slugs with the reduce recoil spring. It's actually fairly accurate with the rifled slugs. This one is unmodified.

I normally wouldn't post this, especially in the rimfire section but it's Christmas so with the heck. Nobody is really interested in AK's on here seems like so I don't talk about them much. All of these are 7.62x39 except the VEPR 12 or course, it being a 12 gauge.

 

[winniethepooh]

Well my cykepod will be here Monday and my ZCO on Tuesday. So. That

 

[acudaowner]

the only thing my rim fire rife needs is a convoy of ammo to be delivered by mistake or on purpose to my house but all my guns wish for that the greedy bastards .

 

[SCRAM2013]

That's pretty good Texasrimfirenut.

I guess I'd like for the Ultimatum Deuce to come in sometime in January.

Been messing around with my AK's lately.

This is a Saiga I said I wasn't going to modify but the forearm I bought didn't fit what I had planned for it to, so I just put it on this Saiga tonight, it's not a permanent mod. The Bushnell Scout scope works really good.
View attachment 7506657

This is my other Saiga. It isn't as accurate as the one above. Not because of the scope but it's simply not as accurate. IIRC it had around a 4" spread at 100 meters on the test target. The one above was around 3" or less. I don't recommend the Troy handguard. It gets too hot.
View attachment 7506663

This was my first AK, the Arsenal SAM7 SF.
View attachment 7506664

This was my first Norinco MAK 90. It has the milled receiver. A little on the ugly side with that stained wood. I thought about refinishing it. This one is said to have never been fired. According to the condition I received it in, I would tend to believe that. I have not fire this one.
View attachment 7506665

This was my second MAK 90. It has the stamped receiver and is noticeably lighter than the milled. It was also said to have been unfired. I've shot around 30 out of it.
View attachment 7506666

This is my third MAK 90. It also has a milled receiver. As you can see it's been modified with a buttsock and pistol grip. The original stock is not bad to shoot, not as bad as I thought it would be. The finish on these MAK90's are heads and tails above the rest. I'm referring to eye appeal, I'm sure it's no more durable than the Arsenal, Molot or Saiga.
View attachment 7506668

This was my first Molot VEPR. The wood was "ok" and the forearm wasn't straight. The buttstock angles didn't mate up nice with the receiver. I was going to send it back but the place said they didn't have anymore to replace it with so I kept it. I decided to heavily modify it because of these reasons.
View attachment 7506671

This is an unmodified Molot VEPR. This one is so nice and everything is near perfect with it. I'll never change this one. I've also never shot it.
View attachment 7506672

This is my sledgehammer. The Molot VEPR 12. I changed the recoil spring to be able to shoot low brass ammo. I also added a buffer to feel comfortable shooting 00 Buck and rifled slugs with the reduce recoil spring. It's actually fairly accurate with the rifled slugs. This one is unmodified.
View attachment 7506674

I normally wouldn't post this, especially in the rimfire section but it's Christmas so with the heck. Nobody is really interested in AK's on here seems like so I don't talk about them much. All of these are 7.62x39 except the VEPR 12 or course, it being a 12 gauge.

Mr. KOD,

Alpha Kilo fan here.

MAK90 #1 in all of the ugliness and MAK90 #3. You have the "more desirable" units. Looking good.

E

 

[DairyDictator]

Really want a vudoo but Wallet says no and Santa is broke ☹☹☹

 

[Drew M]

I'd like my Howa 1100 to turn up,
Been waiting a year for it & have been told it should be here for Christmas.

If I was to dream it would be a Vudoo

 

[Criver600]

Got it

 

[Travelor]

My Vudoo V22S to finally be delivered after a 6+ month wait.

 

[Aussiedan]

I want my mpa chassis, my bergara barrelled action, a ton of ammo and some time to actually get acquainted with said combination.

Of all things I want, time is #1

 

[jbell]

Simply the national, state, & local leaders to pull their collective heads out of their asses and everything go back to how it was last Christmas...

I wish you all a very merry Christmas.

 

[45cal4life]

Life as I knew it prior to 2020. And ammo.....

 

[hafejd30]

I want the squirrel that eats my birdseed to stop going back into the hole in the tree as soon as I open the door with the .22

He is playing me for a fool and I want him dead...

 

[Longshot231]

I want more rimfire ammunition. Preferably quality match ammunition and a good plinking that goes bang every time a trigger is squeezed.

 

[OutThere]

Some 50 degree days.

 

[roostercogburn98]

I want the squirrel that eats my birdseed to stop going back into the hole in the tree as soon as I open the door with the .22

He is playing me for a fool and I want him dead...

Calling @1J04 the squirrel talk has infiltrated the whole hide I believe

 

[squishee]

I would like my health to return and my body to heal from my surgeries so i can shoot again.
I would also like all you guys to get what you want too
.....Oh and also id would like the sherrifs department to open for fingerprints again so i can finish my form 1.

 

[Buck Wilde]

About 20000 rounds of .22 LR would be nice.

 

[gkgeiger]

A benchrest quality trigger for my 457 MTR.

 

[MarkCZ]

lots of ammo and good weather to shoot.
Mark

 

[SourMash]

I would like my health to return and my body to heal from my surgeries so i can shoot again.
I would also like all you guys to get what you want too
.....Oh and also id would like the sherrifs department to open for fingerprints again so i can finish my form 1.

You can do your fingerprints yourself and save some time. Not going to save any money unless you plan on doing another form 1 down the line. I bought a finger print pad off of amazon and ordered the cards from the atf. I goofed (not fingerprints, didn't include all of the ser #)on my first form and had to redo it but I had to resubmit from the beginning, including new prints. Case in point, I saved money by doing it myself.

 

[RETE8]

HS Precision to get into the rimfire rifle game....

 

[Kisssofdeath]

Got it
View attachment 7506801View attachment 7506802

That's a bunch of money sitting there.

 

[Kisssofdeath]

Texasrimfirenut, those AK's were for you. I'll spread some more love tonight.

 

[Badjujuu]

Well my cykepod will be here Monday and my ZCO on Tuesday. So. That

Merry Christmas to you!

 

[JimTN]

Well, for me I wish it was April 1,2021, that's the "target date" for the V22S I ordered last week. Not particularly fond of that date anyways, but it is what it is.

 

[Badjujuu]

I feel you. Im like mid Feb....

 

[Krob95]

More ammo lol and to know what’s in the huge and heavy box that my fiancé got me

 

[Badjujuu]

More ammo lol and to know what’s in the huge and heavy box that my fiancé got me View attachment 7507414

Uhhhhhh, we're all curious now! Keep us posted!

 

[Krob95]

Uhhhhhh, we're all curious now! Keep us posted!

Will do lol

 

[Gleedus]

About 20000 rounds of .22 LR would be nice.

You sure dont ask for much. I guess that would give you 6 months to find more......

 

[MK3XXX]

Bore guide and cleaning rod for my B14r, few more magazines, more Center-X, might as well throw in a TT Diamond while im at it.

 

[TIMMYTOY]

Trump to save America!

 

[Buck Wilde]

I was thinking two weeks!

You sure dont ask for much. I guess that would give you 6 months to find more......

 

[Kisssofdeath]

Everyone should have at least one these three Grand Powers on their wish list for Santa.

Stribog.

X-Calibur

K-22 X-Trim

 

[walldog]

My KIDD Super Grade action/barrel has been gone since September. Had Tony Mele build a stock for it and FIVE WEEKS later it went to Joe Chacon for Bedding/Fitting Hoping to get it back this year!

 

[Kisssofdeath]

I hope so too.

 

[Franko]

I wish my rifle shot CCI SV as well as it shot Lapua Center-X. On a more realistic note, I just hope that 2021 is better for all of us than 2020 was.

 

[Near miss]

1. New 99% sub moa barrel for my Quad.
2. Time and proper lighting conditions (I have not seen the sun as an object in few weeks) to lot test ammo for HK and Quad without flashlight setups. And it is freaking blowing at 5-6mph at minimum when I hit the range. But at least clear sky?
3. More snow (will bring light too)
4. My favourite silhuette range quite near me to open again. I like the view there.

 

[Hoyt7mm]

My lefty RimX and PVA barrel. Fingers crossed they show up just after the holidays.
And more ammo & components

 

[texasrimfirenut]

Texasrimfirenut, those AK's were for you. I'll spread some more love tonight.

I just thought your were taunting me again with those pics. They were some beauties for sure. I need me one of those. All the guns I have, I do not have an AK and need to get me one.

 

[texasrimfirenut]

I wish my rifle shot CCI SV as well as it shot Lapua Center-X. On a more realistic note, I just hope that 2021 is better for all of us than 2020 was.

Amen!

 

[Str8shuutr45]

I wish that CMMG would inform AR22 barrel manufacturers like Lothar Walther when they change the specs on their dedicated 22LR collars.
(( I just purchased a LW barrel that has a short chamber extension compared to the CMMG a dedicated 22LR collar. I put my upper together, took it to the range and had nothing but failure to fire because of light primer strikes. I know the conversion kit was working because it was originally a Bravo that worked perfectly. All I did was change the chamber adapter to a collar and swapped the 223 Wylde chambered barrel for the LW. The tech rep at LW told me all this. CMMG doesn’t answer their emails nor returns calls so I’m going with LW)