Can anyone recomend a good set of rings and bases for a Rem mod 7, since it only has three base mounting screws? I will be putting a 50 mm Leupold 24 x scope on it. 243 AI .
Thanks, ipscmaster
Thanks, ipscmaster
-
Having trouble using the site?
Contact support
Rifle Scopes What rings and bases
- Thread starter ipscmaster
- Start date
Re: What rings and bases
Has no one here ever built a Rem mod 7??? I dont have Leprosy
ipscmaster
Has no one here ever built a Rem mod 7??? I dont have Leprosy
ipscmaster
Re: What rings and bases
Are you looking for a 1-piece base or two piece? and is you scope a 30mm or 1" diameter tube?
Are you looking for a 1-piece base or two piece? and is you scope a 30mm or 1" diameter tube?
Re: What rings and bases
Get a badger, seekins, or nightforce picatinny base. Not sure on the 1 inch rings, all the scope rings I've bought recently are 30mm. But if you can find 1 inch scope rings with any of the above companys then you should be good to go.
Get a badger, seekins, or nightforce picatinny base. Not sure on the 1 inch rings, all the scope rings I've bought recently are 30mm. But if you can find 1 inch scope rings with any of the above companys then you should be good to go.
Re: What rings and bases
If memory serves correctly,EGW makes a one piece base for your rifle.And it's also in 20moa cant.
As far as rings go depending on your budget.A set of TPS lows would prolly fit the bill.
Is your rifle still in stock config's minus the rechamber?
If memory serves correctly,EGW makes a one piece base for your rifle.And it's also in 20moa cant.
As far as rings go depending on your budget.A set of TPS lows would prolly fit the bill.
Is your rifle still in stock config's minus the rechamber?
Re: What rings and bases
My memory was right this time....
Heres a link.
http://egw-guns.com/store/index.php?main_page=product_info&cPath=39_128&products_id=222
My memory was right this time....
Heres a link.
http://egw-guns.com/store/index.php?main_page=product_info&cPath=39_128&products_id=222
Re: What rings and bases
ipscmaster,
I've got a base for a three hole Model 7 sitting on the shelf that I made a few weeks ago for a customer that changed their mind. Its 304 stainless steel, that has had a black, baked polymer finish applied. I can also supply stainless or titanium rings in 30 or 34mm. You can PM me, or give me a call at 800-553-8527 if you would be interested.
- Cameron
ipscmaster,
I've got a base for a three hole Model 7 sitting on the shelf that I made a few weeks ago for a customer that changed their mind. Its 304 stainless steel, that has had a black, baked polymer finish applied. I can also supply stainless or titanium rings in 30 or 34mm. You can PM me, or give me a call at 800-553-8527 if you would be interested.
- Cameron
Re: What rings and bases
Long range dogr +1
Good call on the TPS rings! My last two scopes were both mounted on TPS bases and rings. The quality is great and the price is right for what you get.
Long range dogr +1
Good call on the TPS rings! My last two scopes were both mounted on TPS bases and rings. The quality is great and the price is right for what you get.
Re: What rings and bases
I sure appreciate everyone's input. I put a 40x configuration barrel at 24" in a custom thumbhole stock. This is my first 243. I am an ex Viet nam sniper and have always shot 308 cal. But' I am getting too old for the recoil and decided the 243 AI might fit the bill. Cameron, please tell me more about your rings and bases. I am very interested. Thanks too all, ipscmaster.
I sure appreciate everyone's input. I put a 40x configuration barrel at 24" in a custom thumbhole stock. This is my first 243. I am an ex Viet nam sniper and have always shot 308 cal. But' I am getting too old for the recoil and decided the 243 AI might fit the bill. Cameron, please tell me more about your rings and bases. I am very interested. Thanks too all, ipscmaster.
Re: What rings and bases
ipscmaster,
Here is a link to one of our Remington 700 Black Stainless bases. The Model 7 base is identical, just approx .4" shorter off the rear.
Remington 700 20 MOA base
Here is a link to our rings. I only have pictures of them in the white, but they are also available with a black, baked polymer finish at no additional cost.
30mm Stainless Scope Rings - 0.825" Tall
They are both available in either stainless or titanium, but for the model 7, I only have a black coated, 20 MOA, stainless base on the shelf. Any other configuration would take a day or two to build to spec.
Please PM me or give me a call at 800-553-8527 if you would like any more details, or additional photos.
- Cameron
ipscmaster,
Here is a link to one of our Remington 700 Black Stainless bases. The Model 7 base is identical, just approx .4" shorter off the rear.
Remington 700 20 MOA base
Here is a link to our rings. I only have pictures of them in the white, but they are also available with a black, baked polymer finish at no additional cost.
30mm Stainless Scope Rings - 0.825" Tall
They are both available in either stainless or titanium, but for the model 7, I only have a black coated, 20 MOA, stainless base on the shelf. Any other configuration would take a day or two to build to spec.
Please PM me or give me a call at 800-553-8527 if you would like any more details, or additional photos.
- Cameron
Re: What rings and bases
I recently bought some rings from TPS: http://www.tacticalprecision.com/TSR%20Scope%20Rings.htm
they are every bit as good as my LaRue, Nightforce, Seekins, & Badger rings at about 1/2 the price. Strongly recommend you try them.
I recently bought some rings from TPS: http://www.tacticalprecision.com/TSR%20Scope%20Rings.htm
they are every bit as good as my LaRue, Nightforce, Seekins, & Badger rings at about 1/2 the price. Strongly recommend you try them.
Similar threads
