Rifle Scopes What Seekins Ring Height for 5-R and HDMR

[DP425]

.308 Rem 700 5-R w/Seekins 20MOA rail
Low- 0.92"
High- 1.0"

I'm inclined to believe the low rings will work, but since the rifle isn't here, or the scope... I figured someone on here has got to be running an HDMR on a 5-R, SPS or 700P with a similar base.

 

[ejd049]

Re: What Seekins Ring Height for 5-R and HDMR

This is pretty dead on!!!
http://www.seekinsprecision.com/index.ph...6&Itemid=33

 

[jsthntn247]

Re: What Seekins Ring Height for 5-R and HDMR

It wasn't dead on for me, but maybe it will work for you.

 

[DP425]

Re: What Seekins Ring Height for 5-R and HDMR

Doesn't really do much for me as it doesn't list bushnell, but using leupold w 50mm objective it comes back w med- 30mm which is a bit shorter than the 34mm low

 

[Glen Seekins]

Re: What Seekins Ring Height for 5-R and HDMR

If you take your objective size into account only, then its always going to be the same. If you have a 34mm tube you cant go any lower than our 34mm Low regardless of how low it says you can go with a 30mm tube. I would always recommend going as low as possible for your application and for this its the 34 lows

 

[DP425]

Re: What Seekins Ring Height for 5-R and HDMR

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: heatseekins</div><div class="ubbcode-body">If you take your objective size into account only, then its always going to be the same. If you have a 34mm tube you cant go any lower than our 34mm Low regardless of how low it says you can go with a 30mm tube. I would always recommend going as low as possible for your application and for this its the 34 lows </div></div>

Okay that's what I was basing my assumption on. Thanks Glen!