Well i did do 15 years as a roadie, and the only good thing about stagehands is you don't have to see them tomorrow. I guess carny interns are about the same?? you fuckers have to be kidding!!! You have no idea.....
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Well i did do 15 years as a roadie, and the only good thing about stagehands is you don't have to see them tomorrow. I guess carny interns are about the same?? you fuckers have to be kidding!!! You have no idea.....
I loaded up some 7mm 168g MatchKings with 67g and they were moving at 2550. So, we'll see how much powder I gotta do to get to my desired 2900.... Or if I can get there.
That blows...Did a little sandblasting this morning. Had a truck frame and 6 rims to do. I decided to try out some gloves a guy gave me.... while rolling a rim with my right hand and holding the nozzle in my left, the rim started to tip. Seeing as it a steel 22.5 with 11r tire, it’s not very light. Out of instinct to not let shit fall, I reached over with my left to try and stop it enough while still holding the nozzle. It made a quick pass across the top of my hand and got me. I’ve blasted through over 40 tons of sand and never had a mishap. Shit happens, but this one kind of hurt. Damn thing is going to take forever to heal!!View attachment 7066887View attachment 7066886
2900 with 168's should be no problem. It's my stable load in 3 7MM's. Plenty of people shoot up to 3100 in some of them, but 2900 has been a great number for mine with 168 Bergers.
Silica sandThat blows...
Bead or Aluminum Oxide?
R
Code for bone shards of your enemies?Silica sand
What kind/brand of trap is that?
They tend to never find them when they’re in small enough pieces....Code for bone shards of your enemies?
That seat off of a lone wolf stand?
Muzzle!
Exactly. As long as I can get 2850-2950 with no pressure signs, sub-MOA and reasonable numbers close to factory match ammo (SD's of 15-ish and under, ES's 50 and under) I know I'll be a very happy camper with this 24" Tikka Lite (Sporter contour) barrel until I shoot it out and can re-barrel to a 26" PVA M24/Marksman/medium Palma profile or similar.
A couple of folks have been asking for an update on our Trooper who was injured in the motorcycle accident.
He's actually doing very well. Perhaps even better than expected!
He started PT this week and while he still has quite a ways to go, he's motivated, committed, and determined to get back as good or better than before!
Thanks once again to everyone who has supported them in prayer, thought, cards, letters, donations - everything!
Nothing is minor. None of it is meaningless. Every single act has helped to prop the young family back up and to get them back on the rails.
I am proud to be associated with such incredible and caring people as there are in this virtual community!
View attachment 7067674
View attachment 7067675
View attachment 7067676
Exactly. As long as I can get 2850-2950 with no pressure signs, sub-MOA and reasonable numbers close to factory match ammo (SD's of 15-ish and under, ES's 50 and under) I know I'll be a very happy camper with this 24" Tikka Lite (Sporter contour) barrel until I shoot it out and can re-barrel to a 26" PVA M24/Marksman/medium Palma profile or similar.
Is "Patty" going to join after a few libations?Just settling in and getting ready to watch the ARCA race at Talladega.
Nothing planned for later. Maybe drink some rye and see what comes up.
View attachment 7068055
View attachment 7068178Hands starting to heal. Got a long way to go.
Family court is a messed up thing that doesn’t make any sense to anyone...
Tucker is the pond wheel chair redneckable? I think that young man and wife need a fishing day.
SandblastingWTF? Did I miss a post or two?
What happened to the hand Geno?
Anyone else have wood ducks running around the yard? ?
Anyone else have wood ducks running around the yard? ?
We've had Riley over and on the dock before, but I'm scheming to make it easier. Thinking of putting floating dock off the dam and then dropping some cedar trees off the front corners of it. A buddy had a setup like that on a nearby lake years ago and all you had to was drop a crappie jig in and let it start sinking. Pretty much guaranteed a fat slab every time.
If I can get it setup on the dam they can drive him right to it in the van and ramp out ot where the dock would begin.
I promised Riley an ATV ride this weekend, so I might be able to get him on the existing dock with the Polaris and get a jig in the water. He's not too good with his hands, but we can help him out.
That's a little more elaborate than what I had in mind, but the idea is right. The existing dock is built on poles and it sits a little higher than what I'd like. A floating platform would not only be right on the water but it would provide good shade and structure for the fish. Minnows also nest on the underside of such structures, so it's all good.
View attachment 7068178Hands starting to heal. Got a long way to go.
Family court is a messed up thing that doesn’t make any sense to anyone...
Back to Hooterville tonight after a 3 day pull. Spring is a bit late, fellas are getting antsy, etc... Custom applicator putting on Anhydrous. I was thankful the wind was blowing away from the house. Had my fill of that stuff as a kid. A good whiff will take your air away and you think you’re gonna’ die.
View attachment 7068301
The one in about a ........On second thought, not gonna say it.
I might have a new to me four wheeled rifle carrier soon..... I’ll post more details later. But it’s rare, red, and runs on gasoline.....