How far would depend on what starting position you used. Running, standing, prone low crawl? Whichever you choose, we'll need video with commentary, both ascending and descending.
-
Having trouble using the site?
Contact support
Maggie’s What's Your View II
- Thread starter 1J04
- Start date
How far would depend on what starting position you used. Running, standing, prone low crawl? Whichever you choose, we'll need video with commentary, both ascending and descending.
Heading over the hill for radiation treatment this morning. A little rain and some fog later but no snow. Weird winter.
- Nov 3, 2010
- 9,730
- 20,536
Low crawl is out, had enough of that crap in a previous life. No video, decided I kinda like this barn and the people that run it. The rock pole was given a pass.......for that day
- Nov 3, 2010
- 9,730
- 20,536
It’s grown on me faster than I thought. Not as jeepy as I remember the older versions and still has some utility. Paired with that diesel, it has some good power for what it is.
Kraus I think. It’s just what Lowe’s stocked. 33” sink in a 33” cabinet because the original builder cut the hole too big. It was fun....
Hi,
Third flight this year....they need to name this terminal after me, lol.
Sincerely,
Theis
Third flight this year....they need to name this terminal after me, lol.
Sincerely,
Theis
i expected to see a shot in the cockpit drinking scotch w the stewardess
Hi,
I am a heifer free zone!! Have you seen the new batch of hippostewardess' in the industry today lol.
Sincerely,
Theis
You dinosaur......they've been known as flight attendants for forever. Now, they could be (and very likely are) "hippoflightattendants".............
Leaving Grand Junction CO today headed for home after a 96 month inspection. Having grown up in flat land country, the Rockies still intrigue me. Only one glitch (thankful) was that the WiFi wasn’t working. First world problems. Still beats airline travel all to hell.
- Nov 3, 2010
- 9,730
- 20,536
No beadlock at all. Mall crawler? Are you implying this Jeep doesn’t get dirty or work?
edit: it is actually a simulated two piece wheel like a hummwv style, but without the dangerous real qualities a two piece wheel gives you.
Last edited:
- Nov 3, 2010
- 9,730
- 20,536
@tnichols - i cant sort out those ski areas 100%
Almost certain now it is Vail, but not so sure.
Cool shot either way.
I have actually only skied a handful of our ski areas here.
spent more time climbing and skiing in the back country -where there use to be no people. Now its over run with morons
Almost certain now it is Vail, but not so sure.
Cool shot either way.
I have actually only skied a handful of our ski areas here.
spent more time climbing and skiing in the back country -where there use to be no people. Now its over run with morons
Last edited:
Similar, though not as direct as one may think. Hippostewardess is mostly based on being fat and bossy, twatapotamous is a descriptor of just behavior and has no link to their genetically assigned gender. can be male or female (only 2, seriously).
For example, a hippo stewardess can also be a twatapotampous
- Nov 3, 2010
- 9,730
- 20,536
Thank you good sir for the education. If they taught our kids this in the school systems, we would be much better off.
Couple views from last week.
sun up in first and just after sunset from same spot, different directions.
sun up in first and just after sunset from same spot, different directions.
The HMMWV wheel is a beadlock wheel.
Not saying yours doesn't get dirty but the fake beadlock look is usually reserved for the posers. If you aren't one, then good on you for using the Jeep as intended. Though all that extra meat on wheels simply adds unwanted, un-sprung weight. Wheels should be as light as possible (while still retaining strength) to offset the increase in weight going to a larger tire adds.
This is my ride on the gatekeeper in Calico Canyon. I got those crushed rockers doing a couple of the Hammer Trails.
That was at the 35th Anniversary of the Bronco. If you look close in both pictures you can see the person that took the opposite picture. One through my windshield and the other poking out from my rear passenger side.
This was my wife's ride until we sold it when we left CA. Kind of regreting that now as with the release of the new Bronco I could have gotten another $10K for it in the current market. A friend of mine's nicely built Bronco that will be on the market soon, has jumped from the $60K he was anticipatng to $120K now.
On Edit - That creased front fender was earned off-road running the Pilot Rock trail at a Bronco get together.
Last edited:
A picture my daughter drew on a large whiteboard in a study room at school. She was taking a break from her studies.
Hi,
Commonly confused but different species altogether...although the 289lb lard ass with the 80lb English bulldog as emotional support animal was indeed the twatapotamus species...the very elusive asexual genre...
The dog was needed for his PTSD but wait, there's more....
PTSD is because his cousin is serving in US Army.
Sincerely,
Theis
this the one who is planning to be a vet?
Darn good artwork either way.
Just cool to be artistic like that. My oldest brother has it, very gifted.
Yes sir, that’s the one.
Thanks Powdahound. Her and her brother both are very talented when it comes to drawing. If you remember, she’s the one that drew the glasses I posted a couple years ago. This is done in pencil.
This is a snake she drew a while back. Also done in pencil. She blows my mind with her talent.
Who's a Lucky Boy then?
Getting ready to go to range, my Babe gives me a delayed chrissie pressy.
Finally tabbed my old boots to death.
My Babe Rocks!
Getting ready to go to range, my Babe gives me a delayed chrissie pressy.
Finally tabbed my old boots to death.
My Babe Rocks!
- Nov 3, 2010
- 9,730
- 20,536
This is a beadlock wheel?The HMMWV wheel is a beadlock wheel.
Not saying yours doesn't get dirty but the fake beadlock look is usually reserved for the posers. If you aren't one, then good on you for using the Jeep as intended. Though all that extra meat on wheels simply adds unwanted, un-sprung weight. Wheels should be as light as possible (while still retaining strength) to offset the increase in weight going to a larger tire adds.
This is my ride on the gatekeeper in Calico Canyon. I got those crushed rockers doing a couple of the Hammer Trails.
That was at the 35th Anniversary of the Bronco. If you look close in both pictures you can see the person that took the opposite picture. One through my windshield and the other poking out from my rear passenger side.
This was my wife's ride until we sold it when we left CA. Kind of regreting that now as with the release of the new Bronco I could have gotten another $10K for it in the current market. A friend of mine's nicely built Bronco that will be on the market soon, has jumped from the $60K he was anticipatng to $120K now.
Yes, that is one type of beadlock setup.
The split rim is needed to enable the run flat insert to be mounted and it does lock the beads in place. That's how they can continue to drive with the run flat insert. Otherwise the tire would just come off the rim.
I'd buy the snake if y'all want to sell it - seriously!
It could very well be Vail, IDK. I know we were past Aspen and Rifle at that point.
- Nov 3, 2010
- 9,730
- 20,536
Ok, so new learnin for me then. I always assumed they were just regular old rims in all those days if torturing them. I did some reading and it is actually considered a double beadlock style. So, were my corvette wheels beadlock since they had run flats in them? That would make me a real poser to have beadlocks on a coupe
- Nov 3, 2010
- 9,730
- 20,536
Flash back to my view a year ago on Jan 10th 2020 in sunny Arizona
Last edited:
Yes I was aware of the double beadlock feature but didn't want to get more technical then the conversation required. For a while we had guys running modified HMMWV wheels on their Early Broncos. Though it was more for the "look at me" feature since they are HEAVY and like I said adds unsprung weight that is a bad thing.
As to your Vette, you didn't have run flat inserts nor beadlocks. What you have are run flat "TIRES". That are specially reinforced to stay seated in the wheel bead and support the car without air in tire. They are heavier and perform less well than regular tires.
- Nov 3, 2010
- 9,730
- 20,536
I should have laid the sarcasm on thicker, sorry
Wasn't any need for sarcasm in the first place.
While I correctly commented that fake beadlocks were mostly for the poser crowd, I did continue on with kudos for you if you were in fact using the Jeep as intended.
Kind of like going out in skinny jeans with a man bun and then wondering why people assume you are a soyboi.
Feel free to post up some pictures of the Jeep "getting dirty".
my dad had those on a little coupe and got rid of them pronto for a quieter and better ride, as well as the performance.
295 hp in a light car (Z4) needs serious tires.
He and my mom love cruising around in that thing.
Must have been 2008/2009, we just got our first Charger, one of only a few in the whole state. i was chasing speed one sunday morning, chick blew by me at 110 or so and i took off after her. well it was a little faster than the clapped out crown vic i was used to driving and when i looked down at my radar i was doing 140 and almost rear ended her before i stood on the brakes. got her the next weekend too for 100+ lol.
If this were a made for TV movie you would have ended up marrying her. LOL
Put the winter clothes on the targets this afternoon. White on white makes them tough to see let alone spot . Really makes you apply proper fundamentals (recoil management) to see your impacts down range.
Similar threads
