LP Fuzion is an excellent choice for a modern pushfeed, 90* action that accepts prefits.
-
Having trouble using the site?
Contact support
Which action in 2024?
- Thread starter tarheel7734
- Start date
LP Fuzion is an excellent choice for a modern pushfeed, 90* action that accepts prefits.
If you love your Fuzion, just get another one. After having both the LP and the 737 side by side… pretty easy choice.
I was looking for the smoothest available and all the advice steered me towards the Impact and the Fuzion
Fuzion is the smoothest action I’ve ever run personally. But Impact I guess is close.
I think they are available on back order from unknownmunitions.com
Only available in short action right hand for now.
i’ve had 1 bat tv and 2 newer bat tr s. and still have one tr. they are great actions. you won’t find a repeater action that is as smooth right outa the box u less you buy a borden.
i want to try out one of the new bat hammerhead “competition” actions.
Imo the CDG is the best action for the money out there. Everyone I know running them In comps has nothing but great things to say. It's also $4-500 less than the other flagship actions.
I got a bunch of impacts and no reason to switch but if I was starting fresh the CDG would get a serious look.
I got a bunch of impacts and no reason to switch but if I was starting fresh the CDG would get a serious look.
One available right now at brunos
CDG packs in a rich feature set for the price.
It should definitely be worth a strong consideration for anyone looking to get into a new action, especially if they are looking for value.
ARC CDG looks to be a great action, and it comes in at an amazing price point. Never tried one so I can't speak to anything outside of specs on paper and ARC's reputation.
I only shoot PRS for what it's worth.
I run all Impact 737r's. I swapped from a TL3. I don't care for Bighorn's offerings. Their DLC coating wore off super quick, the TL3 had to be run in a very specific manner to be smooth in my opinion, and the extractor failed on mine and a buddy's after ~1500 rounds.
Impacts are the smoothest 90° action I've run (after they're broken in), and they just plain run. They were designed to run smooth in the Oklahoma moon dust and I can confirm they do as long as your mags work (don't bring ARC mags to a match in OK). Lone Peak Fuzions are pretty similar, but the bolt feels a little tighter in the action.
I only shoot PRS for what it's worth.
I run all Impact 737r's. I swapped from a TL3. I don't care for Bighorn's offerings. Their DLC coating wore off super quick, the TL3 had to be run in a very specific manner to be smooth in my opinion, and the extractor failed on mine and a buddy's after ~1500 rounds.
Impacts are the smoothest 90° action I've run (after they're broken in), and they just plain run. They were designed to run smooth in the Oklahoma moon dust and I can confirm they do as long as your mags work (don't bring ARC mags to a match in OK). Lone Peak Fuzions are pretty similar, but the bolt feels a little tighter in the action.
I’ve had a TL3, Stiller, and an Origin
I got to fingerfuck and run both a LA and SA Impact and if I was building a game gun, that’s what I’m getting next
Which is gonna happen if cards play out this year
I got to fingerfuck and run both a LA and SA Impact and if I was building a game gun, that’s what I’m getting next
Which is gonna happen if cards play out this year
I think I have decided on the tl3. Talking with some people, most of the consensus is that the tl3 is a bit smoother of an action than the origin.
My next question.. is anyone still running a 6.5 creedmoor? I was debating on a 6.5 creed vs 6.5 prc and I don't currently reload. The price if the creed is quite a bit cheaper currently.
My next question.. is anyone still running a 6.5 creedmoor? I was debating on a 6.5 creed vs 6.5 prc and I don't currently reload. The price if the creed is quite a bit cheaper currently.
Comparing velocities of factory 140gr ammo between 6.5CM and 6.5 PRC... The 6.5 PRC is extremely UNDERwhelming considering the significantly decreased barrel life and powder consumption over the CM. Most of the velocity difference can be made up using powder like StaBall 6.5.
I will be using factory ammo. I can not reload currently and probably be years before I can.
Those hammerheads look sweet but damn they better be for that $. How much better than a fuzion for $1400 can they be?
When you leave a 2 day match in western Oklahoma, you always take a lil bit of our special dust home with you. This is exactly why Tate and Wade designed this action the way they did. There is a reason they have and do dominate the PRS year after year.
There's more than a few actions that can handle Oklahoma moon dust more than adequately.
Good choice. I really like my 2 TL3s. Have the .223, 6mmARC and .308 bolt faces to run a bunch of calibers in them.
And yes there are still a bunch of people running the 6.5 Creedmoor. I would definitely go with it over the PRC. Ammo will be cheaper and the 140 ELD-Ms will do everything you need. Here's my TL3 6.5 Creedmoor match rifle.
There's also a few that get completely screwed by it. *cough* *cough* defiance tenacity *cough* *cough*
Defiance certainly wouldn't be my choice if I was regularly in those conditions, though some say you can spec a Defiance to handle it.
LP Fuzion, Impact, ARC Mausingfield and others can eat up a lot of debris without difficulty.
Some people have Defiances that have enough clearance, and they seem to work great. I think you have to ask for it when it's made though, and know what you're asking for, which... who's going to do that with their lead times? 3/4 of the Defiances I've messed with in Utah felt like someone had wrapped the bolt in duct tape and gummed up the raceways.
Ok put deposit down. Here is my build specs I am going with.
Tl3 action with Bartlein barrel 24" m24 profile with surefire socom mb.
6.5 creedmoor
Manners t4a team elite high plains with gen 2 mini chassis atlas rail
Trigger tech rem 700
Atacr 7×35 mil xt fde
Barrel, action rings will all match the stock.
Pelican or storm case with cut foam.
Tl3 action with Bartlein barrel 24" m24 profile with surefire socom mb.
6.5 creedmoor
Manners t4a team elite high plains with gen 2 mini chassis atlas rail
Trigger tech rem 700
Atacr 7×35 mil xt fde
Barrel, action rings will all match the stock.
Pelican or storm case with cut foam.
Looks good. What will the rifle be used for? I only as as you can get some free velocity with factory ammo with a little longer barrel. The one in the pic above is 28" but if you needed shorter then it will work also.
It's my training rifle. I don't want to go over 24" barrel. It will be drug in a bag through the woods and brush and through buildings as well as other positions. Targets probably out to 1500 meters on rare occasions. If I get into prs it will be used for that as well.
Yep. Altus will be putting it together for me. If I were setup I could do it myself. This way it's less for me to worry about and the price is really fair.
I've hit over 1650 meters with 7.62. I would prefer a larger caliber, but it can be done.
He is from the 7th group so I don’t doubt him or his abilities. We old fng mere men shoot to a mile at sea level with 147’s in 6.5’s with good results so it’s possible. It’s all about conditions
50% may be a stretch. I agree though that there are some impressive builds for sale in the px.
Sometimes you just have to build your own though.
Well if you get a new barrel or want to change calibers down the road just let me know and I can help out as I have the tools to swap them and only about an hour down the road from you.
ETA Oops my bad. I saw your location and thought Asheboro and not Asheville so I am actually 4 hours east so would be cheaper to just buy a barrel vise and action wrench and do it yourself. LOL
I go to Clayton several times a year. Travel us not an issue. I might be moving to Johnson City TN soon or somewhere else in NC. My status here has changed. I might need to move back closer to Bragg (Liberty ,it will always be Bragg to us.) as my trips there might increase.. I was just there for two months and just got back to Asheville on Wednesday.
Well that would make it easier as Bragg is only about 45 minutes away. LOL If near the offer is there.
Crap I just drove by you two months ago on my way to visit Daughter in Virginia. I ate at great Italian place in Fayetteville. Next time dinner on me Rob
Yeah let me know. I am only about 20 min off 95 but a little north of Bragg but definitely more places to eat down there. Just let me know next trip up.
My friend opened the original down on Ramsey next to Methodist College back around 2001 or 2002. He was a nurse in the Army and originated from NY. Guess he branched out to a second location later. It great food. I love his Pizza. Before that I always had Brooklyn pizza and this little Italian joint down on Yadkin that is not there anymore. Man that place has changed over the years.
I'm 1 week down of my time washington state mandatory ffl transfer for the Bat machine hammerhead.. I played around with it when doing my paperwork and man that thing is a work of art! Can't wait to get it and get my build done!
I’ve seen a few buddies talk about the Hammerhead. Looks cool, but I’m struggling to find a what makes it $1800?
I just put an Impact into WA state imposed purgatory, so annoying!
Paying for that Bat machine quality. Personally I've never had a bat but I've heard so many good things and I wanted a good custom action, I looked at the hammerhead the tr defiance and the hammerhead with the 75° 2 lug and the shorter bolt stop for br variants just really sold me.
Man it really is.. if you read that stupid law it's called a "cooling off" period.. it should applied be applied to fully completed firearms if anything.
I don't know, sounds like completely sensible gun control. I mean, have you considered that rifles are almost as deadly as blunt objects. And I'm sure bolt guns are a large majority of the "rifle" categorization.
Guess they are afraid you will either use it as a part of a hammer or throw it at someone after walking out of the store. Yeah that's what we get for letting Idiots create laws.
Advantages: ability to run aw mags, straight bolt handle, integral recoil lug.
Disadvantages: less pin fall than origin, can only run tl3 barrels, whereas original can use origin and tl3 barrels with hunts recoil lug. Can only run dbm, due to aw cut, no bdl will function with this.
My first origin would only run with binder plate mags, I had to notch and recontour the feed ramp on that one, but the two newer origins Ive gotten have worked fine with ARC aics mags. These allow 2.97 coal to be loaded. I'm beginning to really like aw mags and actions cut to run them are quite handy. I've been thinking about sending an origin to LRI to have cut to AW spec.
