Which Foundation Stock Model?

[man32ahan]

As a lefty coming from a MPA Matrix Pro Chassis which model would most closely match a chassis?

I like the vertical grip. I’m short with a standard length of pull.

Is the Centurion model what I should be looking at or a different model?

Thanks in advance.

 

[Rio Precision Gunworks]

Yea, Centurion, and then just take out any spacers in the buttstock. You'll probably want one of the weight kits as well for balance. Midwest Tungsten keeps them in stock as far as tungsten weights. But they are expensive. There's some other brass and lead options out there as well.

 

[K80/6.5]

I would get the centurion as well.
If you have a band saw or hack saw just buy the 5/8 hex brass rod and cut it. Save you some money I used hot glue to hold in place and is working good. I also drilled and tapped them so I can thread a screw to help pull them out.

Brass Hex Bar 360

Alloy 360, also known as free-cutting brass, is an alloy mixture of copper and zinc and is known both for its’ strength and resistance to corrosion. 360 Brass has excellent machinability, conductivity and formability. It can be easily polished.

fastmetals.com