Rifle Scopes Which switch view for the Tangent Theta 5-25
- Thread starter superde
- Start date
https://www.switchviewusa.com/scope-compatibility/
Tangent Theta5-25 *(requires longer screw)1819-1870 DSFD Switchview™1819 - Fold Down Switchview™*1819SV - Switchview™*
I tried the MK Machining version on my TT315m but it doesn't work. Blocks the bolt function when on 3x. So I'm looking for one for the 315m. By chance do you know if the power ring on the 525P is the same size as the 315m?
Tangent Theta5-25 *(requires longer screw)1819-1870 DSFD Switchview™1819 - Fold Down Switchview™*1819SV - Switchview™*
I tried the MK Machining version on my TT315m but it doesn't work. Blocks the bolt function when on 3x. So I'm looking for one for the 315m. By chance do you know if the power ring on the 525P is the same size as the 315m?
http://shop.aadmount.com/Exact-Fit-Throw-Lever-Tangent-Theta-5-25X56mm-EFTLTanTheta.htm
I rock Aadmount's. Good stuff
I rock Aadmount's. Good stuff
Aadmount is backordered and has not responded to the emails I have sent.
I picked up a 1819-1870 DSFD Switchview throw lever. I'll let you know how it works
I picked up a 1819-1870 DSFD Switchview throw lever. I'll let you know how it works
They do. I have one. He wasn't sure if it will fit, so I sent him my TT315M to try, so everything was test fitted: lever, caps, etc.
I am about to do a comparison of TT315M with Kahles K318i, so I'll take better pictures. In the meantime, this gives you a reasonable look of the switchview:
They do. I have one. He wasn't sure if it will fit, so I sent him my TT315M to try, so everything was test fitted: lever, caps, etc.
I am about to do a comparison of TT315M with Kahles K318i, so I'll take better pictures. In the meantime, this gives you a reasonable look of the switchview:
Koshkin,Is it the throw lever they have for the TT 5-25X56mm item# EFTLTanthea.I don't want to order the wrong one.They do. I have one. He wasn't sure if it will fit, so I sent him my TT315M to try, so everything was test fitted: lever, caps, etc.
I am about to do a comparison of TT315M with Kahles K318i, so I'll take better pictures. In the meantime, this gives you a reasonable look of the switchview:
I think all AAD products are "backordered" because he makes them on demand. Ordered mine yesterday, will update once received.
It does make the magnification ring easier to operate without shifting your shooting position much. I think the throw lever and ocular cap are the same as the 5-25x56.
If you want to be sure, send a note when you place the order that this is for the TT315M.
ILya
I am using one of those breakaway nylon coaster cat tails. You get them on Amazon for $10, incl shipping. Ugly as hell but works perfectly. You can position it wherever you want on the ring.
I agree I have no idea why TT made it so tight!
I agree I have no idea why TT made it so tight!
Yeah, looking at it now, almost everything is backordered. That makes sense. Oh well.
Hi guys,
I'm curious as to if anyone else has had issues with fitment of a lever from me? I've sold hundreds of Tangent levers and no one has reached out with a clearance issue. We offset the lever from the "nub" so you can flip it 180* to adjust clearance as you like. I just can't see dropping $50+ on another printed lever
mkmachining.com
I'm curious as to if anyone else has had issues with fitment of a lever from me? I've sold hundreds of Tangent levers and no one has reached out with a clearance issue. We offset the lever from the "nub" so you can flip it 180* to adjust clearance as you like. I just can't see dropping $50+ on another printed lever
Tangent Theta Polymer Throw Lever – MK Machining
Upgrade your Tangent Theta optic with one of our Tangent Theta Polymer Throw Lever, speeding up magnification changes and target engagements without breaking the bank. Our levers are proudly printed in the USA. Easily installs in a minute or less, and has a lifetime warranty.
mkmachining.com
Similar threads
