This seems like a dumb question but I am having trouble with it. I have a 20" Thompson Center Encore barrel and need it threaded for a brake and the brake tapered and indexed. Apparently due to the lug design and the short length several gunsmiths I talked to today aren't able to fit the barrel in their lathe properly. Anyone have any suggestions for me? I need this done and returned to me this month...
-
Having trouble using the site?
Contact support
Gunsmithing Who can thread my T/C Encore barrel?
- Thread starter Shortdraw
- Start date
Re: Who can thread my T/C Encore barrel?
Try Southern Precision Rifles. If they can't get to you on time they will tell you. Maybe your plumber might do it. Deadlines are hard to follow sometimes. I had a brake or two installed by a "professional" who was in a hurry to go to Alaska as a guide. Both had strikes. Both barrels were ruined for accuracy until they were cut and re-crowned.
Try Southern Precision Rifles. If they can't get to you on time they will tell you. Maybe your plumber might do it. Deadlines are hard to follow sometimes. I had a brake or two installed by a "professional" who was in a hurry to go to Alaska as a guide. Both had strikes. Both barrels were ruined for accuracy until they were cut and re-crowned.
Re: Who can thread my T/C Encore barrel?
The barrel is a 375 H&H and the brake is a Holland QD copy, 1" diameter. So far RWS, Beanland, and three others that I normally work with can't do it. I don't know anything about lathes or machining so I can't clearly explain the issue. I don't really need a rush job on this but I need someone who can do this in a reasonable amount of time.
The barrel is a 375 H&H and the brake is a Holland QD copy, 1" diameter. So far RWS, Beanland, and three others that I normally work with can't do it. I don't know anything about lathes or machining so I can't clearly explain the issue. I don't really need a rush job on this but I need someone who can do this in a reasonable amount of time.
Re: Who can thread my T/C Encore barrel?
I done a 30-06 encore pistol barrel and the lug would fit between the jaws on a 3 jaw chuck.I beliece I ran it in between centers with a dog but the jaws wuld tighten down on the barrel with the 3 jaw chuck because I had to take my 6 jaw off to do it.
I done a 30-06 encore pistol barrel and the lug would fit between the jaws on a 3 jaw chuck.I beliece I ran it in between centers with a dog but the jaws wuld tighten down on the barrel with the 3 jaw chuck because I had to take my 6 jaw off to do it.
Re: Who can thread my T/C Encore barrel?
<span style="color: #990000">LINK to Bullberry who make custom TC Encore barrels </span> <span style="color: #CC0000"><=====<<< Click Here</span>
<span style="color: #990000">LINK to Bullberry who make custom TC Encore barrels </span> <span style="color: #CC0000"><=====<<< Click Here</span>
Re: Who can thread my T/C Encore barrel?
http://www.matchgrademachine.com/t_c_prices_public.php
These guys did good work on encores that I had.
http://www.matchgrademachine.com/t_c_prices_public.php
These guys did good work on encores that I had.
Re: Who can thread my T/C Encore barrel?
Bullberry was a no-go. They won't do a factory barrel. Match grade machine was going to return my call on Monday. I appreciate the responses, and am going to give Clearwater Precision a try. Gotta love Snipershide. Ask and you shall receive.
Bullberry was a no-go. They won't do a factory barrel. Match grade machine was going to return my call on Monday. I appreciate the responses, and am going to give Clearwater Precision a try. Gotta love Snipershide. Ask and you shall receive.
Re: Who can thread my T/C Encore barrel?
Does the brake already have threads?If so what size are they?Usually on Encore barrels there is plenty of meat to work with.Try E.Arthur Brown.If you lived near me I would say bring it and we will look at it.Post some pics of the end of the barrel and the break please sir.I know timing it is a issue but it gets done everyday.E.Arthur Brown I know can do it because they sell those JP Howitzer brake and they have t be timed as well.I never have done a break that had to be timed.
Does the brake already have threads?If so what size are they?Usually on Encore barrels there is plenty of meat to work with.Try E.Arthur Brown.If you lived near me I would say bring it and we will look at it.Post some pics of the end of the barrel and the break please sir.I know timing it is a issue but it gets done everyday.E.Arthur Brown I know can do it because they sell those JP Howitzer brake and they have t be timed as well.I never have done a break that had to be timed.
Re: Who can thread my T/C Encore barrel?
I'd say SSK but hard to tell turn around time with them.
http://sskindustries.com/
They do superb work but sometimes a bit backed up with work.
Topstrap
I'd say SSK but hard to tell turn around time with them.
http://sskindustries.com/
They do superb work but sometimes a bit backed up with work.
Topstrap
Re: Who can thread my T/C Encore barrel?
Try JP Grips & Machine I used them for cutting down a Remington 700 barrel and threading. They have reasonable prices and good turn around time.
http://www.jpgrips.com/page1
Try JP Grips & Machine I used them for cutting down a Remington 700 barrel and threading. They have reasonable prices and good turn around time.
http://www.jpgrips.com/page1
Similar threads
