Gunsmithing who has 338 barrels on hand
- Thread starter tjonh2001
- Start date
Re: who has 338 barrels on hand
I have a Krieger 9.35 Twist, #17 (Heavy Contour) on the shelf. Finished length is 27.5".
I have a Krieger 9.35 Twist, #17 (Heavy Contour) on the shelf. Finished length is 27.5".
Re: who has 338 barrels on hand
give brunos shooter supply a call. Sometimes they have one. Midway might have something as well.
give brunos shooter supply a call. Sometimes they have one. Midway might have something as well.
Re: who has 338 barrels on hand
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tjonh2001</div><div class="ubbcode-body">im trying to find a 338 barrel 10 twist or faster for my 338lapua project. anyone know where i can find one in stock. looking for a haeavy barrel. also need a badger m5 for the lapua. </div></div>
Try Bruno Shooter Supply in AZ. Clean out your PM box, it's full
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tjonh2001</div><div class="ubbcode-body">im trying to find a 338 barrel 10 twist or faster for my 338lapua project. anyone know where i can find one in stock. looking for a haeavy barrel. also need a badger m5 for the lapua. </div></div>
Try Bruno Shooter Supply in AZ. Clean out your PM box, it's full
Re: who has 338 barrels on hand
Bruno's typically has 6mm, 6.5mm or the occasional 30 cal. They normally wouldn't stock a .338.
Bruno's typically has 6mm, 6.5mm or the occasional 30 cal. They normally wouldn't stock a .338.
Re: who has 338 barrels on hand
You might call Devin at Sin Arms.......
He has Brux barrel and does the chambering himself, also LW barrels
www.sin-arms.com
Pop
You might call Devin at Sin Arms.......
He has Brux barrel and does the chambering himself, also LW barrels
www.sin-arms.com
Pop
Re: who has 338 barrels on hand
Corlane has a 27" pac-nor, was suposed to be for my build but went with a Krieger instead. They would probably give you a good deal on it.
Corlane has a 27" pac-nor, was suposed to be for my build but went with a Krieger instead. They would probably give you a good deal on it.
Re: who has 338 barrels on hand
Try George at GAP. Just shipped him some more .338's a couple to few weeks ago. If they are not all spoken for I'm sure he would sell you one.
Later, Frank
Bartlein Barrels
Try George at GAP. Just shipped him some more .338's a couple to few weeks ago. If they are not all spoken for I'm sure he would sell you one.
Later, Frank
Bartlein Barrels
Re: who has 338 barrels on hand
I think I have 3 brux barrels in stock, 9.7 and 10 twist 338
should all finish at 30, couple different contours.
Call me at the shop and I may be able to help.
contact info at www.centershotrifles.com
I think I have 3 brux barrels in stock, 9.7 and 10 twist 338
should all finish at 30, couple different contours.
Call me at the shop and I may be able to help.
contact info at www.centershotrifles.com
Re: who has 338 barrels on hand
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jim See</div><div class="ubbcode-body">I think I have 3 brux barrels in stock, 9.7 and 10 twist 338
should all finish at 30, couple different contours.
Call me at the shop and I may be able to help.
contact info at www.centershotrifles.com </div></div>You better not sell him mine
.
Jim is a good guy give him a call. You wont be disappointed(with Jim or a Brux).
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jim See</div><div class="ubbcode-body">I think I have 3 brux barrels in stock, 9.7 and 10 twist 338
should all finish at 30, couple different contours.
Call me at the shop and I may be able to help.
contact info at www.centershotrifles.com </div></div>You better not sell him mine
Jim is a good guy give him a call. You wont be disappointed(with Jim or a Brux).
Re: who has 338 barrels on hand
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1472751&gonew=1#UNREAD
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1472751&gonew=1#UNREAD
