Rifle Scopes Who makes the lowest 30mm rings
- Thread starter tjonh2001
- Start date
Re: Who makes the lowest 30mm rings
Burris signature zee rings are advertised at .77". Otherwise a few brands have them at .82"
Burris signature zee rings are advertised at .77". Otherwise a few brands have them at .82"
Re: Who makes the lowest 30mm rings
just sack up and put seekins low's on it and get a stock pack the extra 8oz isn't going to break you back hunting you pussy!
just sack up and put seekins low's on it and get a stock pack the extra 8oz isn't going to break you back hunting you pussy!
Re: Who makes the lowest 30mm rings
About the lowest I have found and still a 20moa mount, see my review here.
http://highcountryshooters.com/forum/ubbthreads.php?ubb=showflat&Number=83#Post83
About the lowest I have found and still a 20moa mount, see my review here.
http://highcountryshooters.com/forum/ubbthreads.php?ubb=showflat&Number=83#Post83
Re: Who makes the lowest 30mm rings
TPS Super Low, or Seekins Low rings. Both are 0.820".
As mentioned above, the Burris double dovetail setup is still lower, and the eccentric plastic inserts allow you to add some incline if you really want it.
I had the TPS rings and 2-piece Burris rail when I had my Nightforce (below). I've since gone the Burris double dovetail route with my Bushnell Elite
TPS Super Low, or Seekins Low rings. Both are 0.820".
As mentioned above, the Burris double dovetail setup is still lower, and the eccentric plastic inserts allow you to add some incline if you really want it.
I had the TPS rings and 2-piece Burris rail when I had my Nightforce (below). I've since gone the Burris double dovetail route with my Bushnell Elite
Re: Who makes the lowest 30mm rings
http://www.seekinsprecision.com/
Check these out....some of the best rings out there...and very low.
http://www.seekinsprecision.com/
Check these out....some of the best rings out there...and very low.
Re: Who makes the lowest 30mm rings
Just get the Seekins rings to go with the rail, they're aluminum so they're lightweight and they're low as already mentioned.
Just get the Seekins rings to go with the rail, they're aluminum so they're lightweight and they're low as already mentioned.
Re: Who makes the lowest 30mm rings
good luck finding some Seekins Rings, I talked to them yesterday and was told to hang tight several weeks.
good luck finding some Seekins Rings, I talked to them yesterday and was told to hang tight several weeks.
Re: Who makes the lowest 30mm rings
.735" Steel - http://www.kenfarrell.com/0030MM-L.html
I need to get a photo of these on a rail. They are not light!
.735" Steel - http://www.kenfarrell.com/0030MM-L.html
I need to get a photo of these on a rail. They are not light!
Re: Who makes the lowest 30mm rings
Badger Alloy are .823"
http://www.triadtactical.com/Badger-Max-Alloy-Rings-306-16-Standard-.823-30mm.html
and we have them in stock.
Badger Alloy are .823"
http://www.triadtactical.com/Badger-Max-Alloy-Rings-306-16-Standard-.823-30mm.html
and we have them in stock.
Re: Who makes the lowest 30mm rings
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: z71rat</div><div class="ubbcode-body">Seekins is worth the wait...
DK </div></div>Until you have tried Murphy's. Cameron Murphy will make you any height desired. Less than a week I requested & recieved .335 picatinny rail with .750 rings.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: z71rat</div><div class="ubbcode-body">Seekins is worth the wait...
DK </div></div>Until you have tried Murphy's. Cameron Murphy will make you any height desired. Less than a week I requested & recieved .335 picatinny rail with .750 rings.
Re: Who makes the lowest 30mm rings
+1 for Murphy Precision.
got two sets of titanium .825" so far for my two scopes.
light as 91 grams/pair and better than steel.
+1 for Murphy Precision.
got two sets of titanium .825" so far for my two scopes.
light as 91 grams/pair and better than steel.
Similar threads
