Gunsmithing Work table?

[Raym]

Does anybody have a name of a good gun smithing table to look at? I’m interested in getting one but can’t find a whole lot on them. I’m not a professional by any means but would like to have a decent sized table so I can mount a vice and all other tools I will need. I mess with a little bit of everything. Thanks for the input

 

[hino895]

Grizzly.com

 

[mcfred]

If you're going to do some "gunsmithing", then constructing a suitable work table should be pretty easy enough to do. For $200 I made a stout (700lb) shop table from concrete and 1/4" x 4" steel angle (I mess with a little bit of everything too):

 

[Easy_E]

I bought the plastic leg kit to use with 2x4's and plywood. Screws together real easy and can be knocked down just as easy. To get the height up alittle I used 2x6's around the top 2x8's also could be used. For wood the thing is very sturdy and masonite on top of the ply wood makes a better work surface.
Work Bench Legs

 

[pyplynr]

I have 2 of these and they work extremely well.

https://m.samsclub.com/ip/ultra-heavy-duty-workbench/prod1490086?xid=plp_product_1_5

 

[Bradu]

This is what I use for most of my work.

https://m.samsclub.com/ip/seville-c...top-workbench/prod3460484?xid=plp_product_1_1

 

[Raym]

Thanks everybody for the replies!

 

[_Windrider_]

If you're going to do some "gunsmithing", then constructing a suitable work table should be pretty easy enough to do. For $200 I made a stout (700lb) shop table from concrete and 1/4" x 4" steel angle (I mess with a little bit of everything too):

Let’s talk about that lathe ?

 

[mcfred]

That lathe makes a horrible gunsmithing table, however it does just fine threading/chambering barrels.

 

[Moose]

Does Sams club have these benches in there stores so you could look at them?

 

[Waorani]

Does Sams club have these benches in there stores so you could look at them?

I've seen them in several Sam's. They're nice but better option might be maple butcher block tops available from industrial suppliers, Grizzly, etc and build your own base. https://www.mcmaster.com/butcher-block