SOLD WTS primed 6.5 x 47 lapua brass

[Tbassel12]

Have 150 pieces cleaned annealed and sized once fired Lapua brass then primed with cci BR2 $150 PP ff

 

[kwak]

I thought the Lapua brass was small rifle primers

 

[Tbassel12]

Correction BR4 . Sorry

 

[kwak]

Hope this info might help. I have never seen or heard of anyone using the BR-4. CCI does not advise it either as the BR is not a magnum primer like the 450.

 

[mws2000]

Hope this info might help. I have never seen or heard of anyone using the BR-4. CCI does not advise it either as the BR is not a magnum primer like the 450.

Lot's of people use them in 6.5 x 47 and the BR cases.

 

[Tbassel12]

tbh , i don’t see how it would help my post trying to sell it , with u saying u never heard of br4 being used .... let me just run down to the local gun shop and pick some up since primers are everywhere. ... your knowledge of primers is prolly correct . But from my first hand experience I’ve used them in my gun for the life of two barrels and was able to carry a single digit SD . And as long as the RO’s where calling impacts..... well I guess my wrong way of doing things was still working out . Thank u tho sir

 

[kansas]

Not to muck up your thread but that’s the exact primer I use for 6x47L and shoots 1/2 moa.

 

[JM4590]

PM sent

 

[JM4590]

I’ll take them per PM

 

[Tbassel12]

Sold to JM4590