WTT Spuhr sp-4006 for sp-4001

[George P. Burdell]

I'm looking to trade my sp-4006 (34mm, 0 mil/moa, 1.35") for a sp-4001 to bring a new scope down a little lower. It's used but in great shape. I'll post better pictures soon. Not interested in selling right now until I find a replacement

 

[George P. Burdell]

 

[ophious]

Man are you sure that a 4001 won't interfere with the razor? You're pretty damn close now.

 

[George P. Burdell]

Man are you sure that a 4001 won't interfere with the razor? You're pretty damn close now.

According to Mike at mile high it works with this scope. I haven't tried it yet though.

 

[ophious]

I'm just wondering if you would even be able to utilize the wedge if going that low into the mount. I know my Kahles 525 in the 4001 is pretty damn close. Same with my Kahles 624. Wish I had a spare one to let you try. I might look for someone who has done it first. I can understand wanting to get a little bit closer though.

 

[George P. Burdell]

I'm just wondering if you would even be able to utilize the wedge if going that low into the mount. I know my Kahles 525 in the 4001 is pretty damn close. Same with my Kahles 624. Wish I had a spare one to let you try. I might look for someone who has done it first. I can understand wanting to get a little bit closer though.

I'm having a hard time finding pictures of people that have done it. I may decide but one before I get rid of this one just in case. If it doesn't work I may have to use different rings as the height bothers me as it is

 

[George P. Burdell]

Now you've got me questioning myself again. Ha

 

[ophious]

Sorry man. I just know how big those things are.... and heavy.

 

[blbennett1288]

I am interested in the SP-4006 if you decide to sell it

 

[Swamplife]

It’s going to drop .170 that’s almost 3/16. I’d check the clearance in your mount with a feeler gauge first if you have a set.

 

[George P. Burdell]

It’s going to drop .170 that’s almost 3/16. I’d check the clearance in your mount with a feeler gauge first if you have a set.

Is it that simple? Are the mounts identical dimension wise besides the ring height?

 

[Swamplife]

I’d say they are the same as long as you are not changing the moa of the mounts.

 

[Rebelirons]

I have a Razor in a 4001 that fits fine. I can send you a pic if you want

 

[cauqazn]

Username caught my eye. GT alum here. Go jackets and glws!

 

[George P. Burdell]

Ok I'm now confident it will work. Anybody wanna trade? Have an sp-4001 for sale?

 

[George P. Burdell]

Bought a used sp-4001. Gonna put the sp-4006 up for sale

 

[blbennett1288]

Price?

 

[George P. Burdell]

To clear up some of the confusion here is a picture of the two side by side. There is no intereference in the sp-4001 mount beacause the base of the mound is made differently. As you can see the bottom of the 4001 is lower profile and actually uses five bolts instead of the 4 on the 4006. Clearance inside the mount remains the same.

 

[blbennett1288]

@George P. Burdell you selling the SP-4006?

 

[jb41291]

@George P. Burdell you selling the SP-4006?

I wish i would of seen this earlier. I would of done the trade with you for my sp-4001

 

[blbennett1288]

Yeah pretty poor communication all around

 

[George P. Burdell]

Yeah pretty poor communication all around

Sorry you missed my for sale thread. Was really looking for trades at the time of this post. You were not the only person interested in buying